SYMA X35T Remote Control Quadcopet User Manual

: June 16, 2024
: SYMA

SYMA X35T Remote Control Quadcopet User Manual

Accreditation standard: GB/T26701-2011

The materials, specifications, parts and packaging mentioned in this manual are for reference purposes only. We are not responsible for any changes made to this printed material, nor are we able to inform
customers of any updates or changes. Please refer to the SYMA Toys website for the latest information.

Important safety information

Thank you for purchasing this SYMA product. To ensure that you operate the aircraft correctly, please read these instructions carefully before first use and store them in a safe place for future reference.

Safety information

Keep the smaller-sized accessories out of the reach of children.
This aircraft can move very quickly. When flying for the first time, push left joystick up slowly to prevent the aircraft from ascending too rapidly and causing damage or collisions.
When the flight has ended, switch off the remote control before switching off the power on the aircraft.
Do not store the battery in a hot environment (e.g.near open flames or a heating device).
When the quadcopter is airborne, it should be kept at least 2-3m away from the pilot and other people to avoid the risk of a collision during landing.
Children must be supervised by an adult when operating the aircraft. The aircraft should always remain within the line of sight of the pilot (or instructor).
Do not recharge non-rechargeable batteries. When installing or changing the batteries, ensure that they are connected in the correct polarity. Do not mix old and new batteries or different types of batteries.
Do not short circuit the battery terminals
If you do not plan to use the quadcopter for at least 10 days, discharge the battery to 40%-50%(i.e. if the battery is fully charged, drive the quadcopter for half of the total driving time). This helps to prolong the lifespan of the battery.
Maintain a safe distance from the spinning propellers to avoid the risk of injury.
In order to prevent interference with air traffic control systems, it is forbidden to use remote controls within a5000m radius of an airport runway (calculated from the centre of the runway). Always comply with remote control restriction orders issued by national authorities.
You must only use the recommended transformer for this model. The transformer is not part of the model. Disconnect the model from the transformer or charger before cleaning with cleaning fluid. Regularly inspect the transformer’s wires, plug socket, outer casing and other\ accessories to ensure that they are not damaged. If there are any signs of damage, discontinue use immediately until the fault has been repaired.
After use, ensure that the quadcopter and remote control are switched off and remove the batteries in the remote control.
The packaging and this manual contain important information and should be kept in a safe place for future reference.
Do not look directly at the laser beam.
a reminder that the toy must be used with caution since skill is required in order to control the flight and avoid collisions with the user, objects or third parties.
precautions to be observed such as “Do not touch the rotating rotor, avoid loose clothing or hair that could be caught in the rotor,do not fly near the face”
advice to adult supervis ors to teach children how to safely fly and control the toy.
conditions to be observed when using the toy
Repair and maintenance
Clean the product regularly with a clean, soft cloth.
Avoid exposing the product to direct sunlight or heat.
Do not submerge the product in water, as this may damage the electrical components.
Regularly inspect the propellers, motor and battery. If there are any signs of damage, discontinue use immediately until the fault has been repaired.

-About this product

Specifications
Aircraft
Weight Aircraft Approx. 24 g
Specifications 119x119x42 mm
Flight range Approx.20 m
Flight time Approx.7 mins
Motor 26
Battery 3.7V, 200 mAh
Battery Charging time Approx. 40 min
Remote control
Operating frequency 2.4 GHz
Operating temperature 0°Cto 40°C
Packagecontents
Aircraft 1
Remote 1
USB charging cable 1
Propeller 2 (A\B)
User manual 1

Aircraft components

Propeller protector
Power switch
Propellers
USB Type-C Charging port
Motor

Remote control components

Charge the quadcopter with the USB charging cable that came with the product.
Using adapters with a lower rated current will result in a longer charging time.

Inserting the remote control batteries:

To insert the controller batteries, open the battery cover on the back of the remote control and insert 4 x AAA alkaline batteries, ensuring that you observe the polarity markings (batteries are not included and must be purchased separately).

When installing the batteries, ensure that you match the + and – ends of the battery with the + and – signs on the controller.
Do not mix old and new batteries.
Do not mix different types of batteries.

Flight preparation and turning the aircraft on/off

Pairing the remote control with the aircraft

Turning the quadcopter on

Note:

If the aircraft is flown out of range from the remote control, the aircraft indicator light will start to flash and the aircraft will land slowly.
If the remote control suddenly turns off or runs out of power during flight, the aircraft will automatically land and come to a stop. If the remote control

Turning the quadcopter off

Using the remote control

Trimming

Diagonal roll

Fly circle

Accessories (available separately)

The following section contains a list of optional accessories that are available to purchase.
Accessories can be purchased from your local retailer. Please indicate your preferred colour when making your purchase.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures: eReorient or relocate the receiving antenna.
eIncrease the separation between the equipment and receiver.
eConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.
eConsult the dealer or an experienced radio/TV technician for help.
“This device complies with FCC radiation exposure limits set forth for general population (uncontrolled exposure).This device must not be collocated or operating in conjunction
with any other antenna or transmitter.”
RF frequency band :2408-2472MHZ
Transmitter power : -3.73dBm (Max.)
Sold to EU country product name: [Drone] model number: [X35T] Brand name :SYMA
Contact person: lvan
Tel:+86-0754-86381701
Hereby, [GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD], declares that this [aircraft ] is in compliance with Directive 2014/53/EU.The full test of the EU declaration of conformity is available at the following internet address: http://www.symatoys.com/down/declaration-of-conformity.html
SIMPLIFIED EU DECLARATION OF CONFORMITY