Sedona SDC-S101 Supreme Commercial Electric Food Dehydrator User Manual

Sedona SDC-S101 Supreme Commercial Electric Food Dehydrator

INTRODUCTION

Congratulations! You are now the proud owner of a Tribest® Sedona® Supreme Food Dehydrator. With the advanced Tribest Sedona Supreme Food Dehydrator, you can enjoy the benefits of efficiently and conveniently dehydrating your favorite fruits, vegetables, and meats, utilizing the latest in digital dehydration technology and the revolutionary Two-Stage Temperature-Timer (TST) feature. From apples to zucchini, breads to pates, and your favorite jerky recipes, you can set Sedona Supreme to meet all your dehydrating needs.

The Tribest Sedona Supreme includes our latest innovation: the Two-Stage Sequential Temperature-Timer (TST). The TST allows you to easily set the Tribest Sedona Supreme to start at a higher temperature, to kick-start the dehydration process. Then it automatically switches to a lower temperature to finish off the job without raising the temperature of the food above the desired level. The TST decreases the amount of time it takes to dehydrate your favorite recipes without all the hassle.

The Tribest Sedona Supreme is the advanced solution to dehydration – offering you all the options you require to make the dehydration process as simple and as convenient as possible. With the Tribest Sedona Supreme, you have complete control over setting the timer up to 99 hours or switching to continuous mode for up to 120 hours of worry-free uninterrupted operation. The new Tribest Sedona Supreme utilizes a 7 inch central single-fan heating mechanism, so that the heated air is evenly circulated and distributed for uniform dehydration of your foods. Dehydrate up to 9 trays of your favorite recipes using either the stainless steel or BPA-free trays.

The Tribest Sedona Supreme also offers you a convenient way to monitor your foods with a see through glass window at the front of the unit. As an added convenience, there is an internal LED light that switches on when you open the glass door to check on the dehydration process. The washable and reusable Air Filter helps prevent dust from being blown all over your food during dehydration.

Be sure to carefully unpack your Tribest Sedona Supreme and check that all of the parts are included with your package. Also take the time to become familiar with the functions of the unit before you begin dehydrating foods. It is a good idea to press each button to check their functionality – making you aware of what each button controls. The included trays make your dehydration experience easier while also enhancing the versatility of the machine.

We recommend that you wash all of the trays with warm water and a mild detergent before you first use your Tribest Sedona Supreme. Now you are ready to begin dehydrating with your Tribest Sedona Supreme. We hope you enjoy your new dehydrator, as it helps you better preserve the nutrition from your favorite fruits and vegetables and helps you continue your journey to better health.

Please take the time to thoroughly read through the entire operation manual for proper use and care instructions. Following the instructions in this manual will ensure that your Tribest Sedona Supreme Food Dehydrator operates optimally for years to come.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed including the following:

1. Read all instructions.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electrical shock do not immerse cord, plugs, in water or other liquid.
4. Close supervision is necessary when any appliance is used by or near children.
5. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
7. The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
8. Do not use outdoors
9. Do not let cord hang over edge of table or counter or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
12. Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to “off”, then remove plug from wall outlet.
13. Do not use appliance for other than intended use.

SAVE THESE INSTRUCTIONS

WARNING

1. To prevent electric shock, unplug before cleaning.
2. To ensure continued protection against risk of electric shock, connect to properly earthed outlets only.
3. Do not immerse in water.

SAFETY TIPS

To avoid any possible damage or injury, please follow the basic safety tips:

1. Do not clean the main body directly with water. Always use a damp towel.
2. Do not use in a humid room such as a bathroom. Always operate the machine in a well ventilated setting.
3. Always use a separate outlet that has a minimum of 10 amps. Don’t plug into an extension cord and then into an outlet.
4. Do not block the air vents while operation.
5. Do not expose to high temperatures over 176°F (80°C).
6. Plug in with the main switch OFF.
7. Do not attempt to dehydrate any substances that contain glass or metal powders, dust, or shards.
8. To avoid deterioration of food, remove the dehydrated food immediately after the dehydration process is completed.
9. Store dehydrated foods in a proper place.

TIP: For best results, store in a suitable airtight container.

TIP: Very thickly cut food can restrict airflow. If the food in the tray is touching or close to touching the bottom of the tray above it, please remove the tray above it so that airflow is not restricted. Not all trays need to be used while the machine is in operation.

PARTS LIST

• 1 Main Body
• 9 BPA Free Stainless Steel Mesh Trays
• 1 BPA Free Debris Mat
• 1 Detachable Power Cord
• 1 Operation Manual

NOTE: Each unit is packaged with sponge tray holders. Please make sure to remove the sponge tray holders before using the Sedona Combo. The sponge tray holders were designed to keep your trays in place during transportation. They are not intended to be used with the normal operation of the Sedona.

Optional Parts

SET-UP

1. . POWER Switch is used to turn the dehydrator on and off.

2. MODE button allows you to choose one of three settings. The lights to the right of the MODE button indicate which mode is activated.

   • When the top RED light is lit, only FAST mode is activated.

   • When the bottom GREEN light is lit, only RAW mode is activated.

   • When both the top RED and bottom GREEN light are lit, the Two-Stage Sequential Temperature-Timer is activated (both FAST and RAW mode are activated).
     The three settings:
     a) FAST mode: The average internal temperature levels will be maintained at the indicated temperature. As the heating element cycles on and off, internal temperature will rise and fall. The indicated temperature is the average temperature maintained by the dehydrator.
     b) RAW mode: Internal temperature will never go above the indicated temperature. Indicated temperature is not the average temperature, indicated temperature is the maximum temperature that the machine will go up to. This is useful for preserving certain vital nutrients that can degrade at high temperatures.
     c) COMBO mode: Uses the Two-Stage Sequential Temperature-Timer to set the two temperature/time settings. It starts at a higher temperature for a set time (FAST mode) then automatically drops down to a lower temperature for a set amount of time.

   • FAST mode: The first temperature setting and is set at a higher temperature to encourage more initial dehydrating, less spoiling/fermenting of foods.

   • RAW mode: The second temperature setting and is set at lower temperatures for longer times.

3. SET button has two functions:

   • It enables you to set the temperature and the time.

   • When initially setting the temperature, press the SET button once and the 3 digit of the TEMP window will flash.

   • When you press the SET button once more, the 2 digit TIMER window will flash.

   • Once the temperature and the time is set, the SET button turns on two internal LED lights while the machine is in operation.
     a) Press the SET button once – While the TEMP window flashes, set the desired temperature by using the 10 or 1 buttons to select your desired temperature.
     b) When the TEMP window displays your desired temperature, press the SET button again to finalize your temperature setting. Your desired temperature is now set up, and the TIMER window will flash.
     c) When the TIMER window flashes, set the desired hours by using the 10 or 1 buttons to select the desired time, then press the SET button to finalize your choice.
     NOTE:

   • The stand-by time is 5 seconds. After you press the SET button, if you do not begin to set the temperature or timer setting within 5 seconds, the set-up mode will be cancelled.

   • For faster and more accurate setting of the temperature and time, the dehydrator has 2 separate buttons of 10 and 1. The buttons under the 10 represent increments of ten, whereas the buttons under the 1 represent increments of one.

   • You may set the dehydrating time up to 99 hours.

   • The dehydrator has a Continuous Operation (“Co”) dehydration function which allows you to continuously dehydrate for more than 99 hours. To enable this function, press and hold the 10 Up button until Co is displayed.

   • The Co function will dehydrate for a maximum of 120 hours.

   • The default setting of the dehydrator is 45°C (113°F) for 10 hours.

   • The dehydrator will save your settings for next use even when you turn off the dehydrator.
     While the machine is operating, the SET button also turns on two internal LED lights so you can see inside the machine without opening the door. While the machine is running, press the SET button, and small LED lights in the top, turn on for up to 10 seconds, creating a small beeping sound twice. The lights turn off automatically.

4. P/DOWN buttons (10 and 1) are for setting the temperature or the hours for the timer.
   The 10 Up/Down buttons will change the setting by 10 hours or degrees. The 1 Up/Down buttons will change the setting by 1 hour or degree. Press and hold down the buttons for continuous scrolling.

5. TEMPERATURE display is used for two separate functions:

   • Setting Desired Temperature- During set up this display will be used to set the desired temperature of the drying compartment.
     NOTE: The condition of the inflowing air may adversely affect the actual compartment temperature. The actual compartment temperature may read a +/- 5°C (9°F) difference.
     The difference is registered by the thermal sensor, thus regulating the heating mechanism activity.

   • Temperature Display- Will display your desired temperature setting.
     NOTE: While the temperature displayed by the Temperature Display is set to the desired setting, the actual temperature in the drying chamber may fluctuate up to ±5°C (41°F).

6. TIMER display will show the total number of hours set for each desired temperature.
   This timer automatically counts down, showing the time remaining for dehydrating.

7. °F/°C button will enable you to select the temperature display mode (Fahrenheit or Celsius).
   NOTE: The default setting of Sedona Supreme is in Celsius (°C). Once you set the machine to Celsius or Fahrenheit, the Sedona Supreme will remember your setting even after you turn off the dehydrator.

8. START/PAUSE button is to start or pause operation.
   NOTE:

   • While dehydrator is in operation, if you open the door, the power supply to both the heating coil and the fan will be cut-off. The Sedona Supreme will automatically restart as soon as the door is closed.
   • You will hear a beeping sound when the buttons are pressed, when the door is opened, and when the assigned time is over.
   • To change the temperature and/or timer while the dehydrator is running, press the START/
     PAUSE button to pause the dehydrator, then press the SET button and change the temperature and/or time. Then press START/PAUSE button to re-start the dehydrator.
     Then press START/PAUSE button to re-start the Sedona Combo.

OPERATING INSTRUCTIONS

For your safety and to protect your dehydrator, please follow the instructions below:

1. Always keep the dehydrator on a level surface.
   • Keep the dehydrator at least 10 cm away from walls, other appliances or furniture.
2. Open the door to insert trays into the dehydrator. Hold the tray in the horizontal position and push the tray into the proper slots.
   • Place the food evenly and neatly on each tray as close as possible (remember dehydrating removes water and/or shrinks food). For best results, cut the food into even slices.
   • It is recommended to use separate trays for each type of food.
   • Double check whether all the trays are properly loaded.
3. Plug into an outlet that has 10 amp capacity.
4. Turn the main switch ON.
5. There are three settings to choose with the dehydrator:

TWO-STAGE SEQUENTIAL TEMPERATURE-TIMER (TST) Use Only

The Two-Stage Sequential Temperature-Timer (TST), a dual timer mode that allows for both

FAST mode and RAW mode to be set one after the other. This is the default setting of the machine when it is turned on. FAST mode is set first and then RAW mode is set next. When the program is started, FAST mode will kick start the dehydration process and then RAW mode will finish off dehydration.

1. Turn the dehydrator on, both the RED and GREEN lights to the right of the MODE button will be lit. (Red=FAST mode, Green=RAW mode.)
2. Press the F°/C° button to choose Fahrenheit or Celsius.
3. Press the SET button to set FAST mode to your desired temperature using the UP/DOWN 10 or 1 buttons.
4. Press SET again to set the desired time using the UP/DOWN 10 or 1 buttons for FAST mode.
5. Press SET again to set the desired temperature using the UP/DOWN 10 or 1 buttons for RAW mode.
6. Press SET again to set the desired time using the UP/DOWN 10 or 1 buttons for RAW mode.
7. Press SET to finalize settings.
8. Press the START/PAUSE button to begin operation.

NOTE: During FAST mode the upper red light blinks – while the higher temperature operates first for the desired set time. RAW mode, the lower green light blinks- automatically lowers the temperature to the second setting for the remaining dehydrating time.

FAST Mode Use Only

This setting holds and maintains a higher temperature (e.g. 155°F) for faster dehydrating.

1. Set the dehydrator to FAST mode by pressing the MODE button once to change the default Two-Stage Sequential Temperature-Timer (TST) to FAST mode. (A RED light lit to the upper right of the MODE button indicates that the dehydrator is set at FAST mode.)
2. Press the F°/C° button to choose Fahrenheit or Celsius.
3. Press the SET button to set your desired temperature using the UP/DOWN 10 or 1 buttons.
4. Press the SET button to set your desired time using the UP/DOWN 10 or 1 buttons.
5. Press the SET button again to finalize your settings. The numbers will stop flashing.
6. Press the START/PAUSE button to begin operation.

RAW Mode Use Only

The RAW mode operates in a way such that when the heat sensor reaches the set temperature, heating assembly will cut off to sustain a drying environment lower than indicated temperature to protect from overheating your food.

1. Set the Sedona Combo to RAW mode by pressing the MODE button two times. (A GREEN light to the lower right of the MODE button will indicate that the unit is set on RAW mode.)
2. Press the F°/C° button to choose Fahrenheit or Celsius.
3. Press the SET button to set your desired temperature using the UP/DOWN 10 or 1 buttons.
4. Press the SET button again to set your desired time using the UP/DOWN 10 or 1 buttons.
5. Press the SET button again to finalize your settings. The numbers will stop flashing.
6. Press the START/PAUSE button to begin operation.
7. The dehydrator will beep and automatically switch to stand-by mode after the set time has expired.
8. Turn the main switch OFF after dehydration has finished.

NOTE:

• Dehydrator is designed to evenly distribute warm air from the rear to the front of the unit.
  Depending on the climate and temperature of the air flowing into the unit from the rear, there may be a slight difference in temperature between the trays and inside the drying compartment.

• Because heat rises naturally, it is normal for the top trays to be exposed to more heat than the trays in the center or on the bottom. For best results, rotate the trays periodically

CLEANING AND MAINTENANCE

1. Clean the trays and tray sheets with a mild detergent under warm water after each use.
   WARNING: The trays are NOT dishwasher safe.

2. To clean the main body, first unplug the machine and then clean with a damp towel. Do not rinse the dehydrator with running water or submerge the dehydrator in water.

3. For easier screen/tray cleaning – cover with wet paper towels and soak for a short while.

4. Make sure the trays and tray sheets are thoroughly dried before inserting them back into the dehydrator.

5. Keep your dehydrator and parts in a safe place out of reach of children.

TROUBLESHOOTING

• The plug is incorrectly positioned in the electrical outlet.
• The machine is not switched on.

|

• Plug in again.
• Turn the switch ON.

Display lights are not on|

• The machine is not switched on

|

• Turn the switch ON

Fan is working but

there is no heat

|

• Heating system is out of order.

|

• Turn the machine OFF and contact the nearest service center.

Heater is working but the fan is not working|

• The fan is out of order.
• Foreign material is stuck on the fan.

|

• Turn the machine OFF and contact the nearest service center.
• Remove the foreign material.

Not dehydrating|

• Too much food on the tray.
• Food is overlapped on the tray.
• The fan is not operating properly

|

• Reduce the food quantity.
• Evenly spread the food quantity
• Turn the machine OFF and contact the nearest service center.

Water drops on the door|

• Too much food on the tray.
• The food contains too much water.

|

• Reduce the food quantity.
• Reduce the food quantity and increase the dehydration time.

Overheating or little heating|

• Temperature control system is not working properly.

|

• Turn the machine OFF and contact the nearest service center.

Foods are not evenly dehydrated|

• The thickness of the food is not even.
• There is too much food on the tray.

|

• Evenly slice the food
• Reduce the food on the tray
• Choose the correct tray

Abnormal sound from the fan|

• The fan is out of order.

|

• Turn the machine OFF and contact the nearest service center.

TIPS FOR DEHYDRATING

When dehydrating fruits, vegetables, nuts, or spices keep these tips in mind:

• It’s best to use fruits and vegetables that are in season, grown organically/locally (for more flavor, keeps prices down, availability up.)
• Use fruits or vegetables with appropriate hardness, with no soft spots that discolor during dehydrating.
• Remove unwanted parts: stalks, cores, unwanted seeds, rinds that are not wanted, or outside skins, peel if desired.
• Keep the slices the same size: this will help the dehydrating time stay the same as well.
• When using spice (e.g. BBQ or salty flavors) coat foods with something wet, sticky, or oily to help the spices/flavorings adhere to the food. Olive oil, miso, liquid marinades, or sweeteners like honey or agave work well.
• Store in airtight glass containers to keep the food dried longer.
• To re-hydrate, if you over dry, put a moist paper towel, add a lettuce leaf into the container, or lightly mist the foods with water to rehydrate back to the desired texture.

FRUITS:

• Fruit chips are tasty and a good way to save extra produce for camping, hiking, or for later use.
• Use crisp fruits, or fruits not overly ripened for best results.
• Most fruits lose their sweetness when dehydrated-especially banana chips, so putting a desired spice (e.g. cinnamon, nutmeg, or vanilla) or sweetener (e.g. agave, stevia, or maple syrup) on top of each ‘chip’ can sweeten the finished food.
• Make sure to take remove cores, seeds, and other inedible parts (peels, etc.).
• When using larger pieces (e.g. a small apple, pitted fruits, or bananas) keep them the same size to keep the drying time the same.

GRAINS:

• Best to soak/sprout grains before dehydrating – two or three days is sufficient.
• Grains can be sprouted and dried back in order to make a sprouted flour.
• Savoury or sweet crackers and breads can be made by combining the grains with spices, herbs, vegetables, dried fruits, or even the pulp from juices. The best part of making these foods is that you can improvise. It is not like baking, where exact measurements are necessary for success.
• Grain recipes are done best in the COMBO mode.

NUTS:

• Soak nuts initially in enough water to cover entirely, then add a splash of hydrogen peroxide into the soaking water, and rinse thoroughly after 5 minutes (this gets rid of unwanted mold.)
• Softer nuts, (e.g. cashews or pecans, hardly need any soaking) just the initial soak/rinse (as mentioned above with hydrogen peroxide) to remove unwanted molds.
• The harder nuts (e.g. almonds, brazil nuts) need to be soaked for longer (between 6 – 12 hours), after the initial soaking/rinsing.
• Drying soaked nuts keeps them fresh longer, without the enzymes that coat the nuts (that’s why nuts need rinsing) that inhibit/block digestion. They can take up to 48 hours to fully dehy drate, depending on the size of the nut, the weather (more humidity takes longer), and how long the nut has soaked.
• After a nut has been soaked and dried – it can be ground into a ‘flour’ and used in other recipes.

SEEDS:

• Soak seeds to remove the coating that protects them from automatically sprouting into a plant.
  If you want you can sprout some seeds (e.g. sunflower seeds)

• If you want to make a flour, soak and dry the seeds so that you can grind them.

• Soaked seeds combine well with all the foods (vegetables, fruits, nuts, or grains) in many dehydrated recipes – they act as a thickener, as well as their own lovely flavors.

• Combine to make ‘cereals’ or granolas.

• The RAW mode is fine for solo seed snacks.

• For crackers/cereals/breads use the COMBO mode.

SPICES:

• When using fresh herbs, remove the stems and stalks or anything else inedible.
• Find, create your own combinations, or look at your favorite spice bottles and use that as a guide.
• Dried spices are done best in the RAW mode.

VEGETABLES:

• Dried vegetables – carrots, corn, zucchini, mushrooms, etc, can be great foods to use for soups later in the year, when the food is out of season, or to take on camping/hiking trips.
• Cut into uniform sizes/shapes when dehydrating.
• Take off skins, seeds, and other unwanted parts before dehydrating.
• Some vegetables (e.g. onions) get more spicy/hot flavored when dehydrated and some get sweeter. Test different foods to see what happens to the foods you enjoy.
• Vegetable ‘chips’ are done best in the RAW mode.

Be your own food ‘alchemist’ and make up your own favorite recipes. Be inspired by recipes, and then create your own.

DRYING TIMES CHART

Recommended drying temperature for RAW: 118°

Vegetables

Fruit

Other

PRODUCT INFORMATION

CE Models : 220-240V~, 50/60Hz, 570W
PSE Model : 100V~, 50/60Hz, 570W
SIZE| 12.2” x 14.56” x 19.68” (310mm x 370mm x 500mm)
WEIGHT| 15.9lbs (7.2kg) + Tray set 3.3lbs(1.5Kg) = 19.2lbs(8.7Kg)

CUSTOMERS SUPPORT

Tribest Corporation
1143 N. Patt St., Anaheim, CA 92801
toll free: 888-254-7336 | fax: 714-879-7140
www.tribest.com | service@tribest.com

©2018 Tribest Corporation V20180702

References

• Shop Tribest | USA Official Site | Making Heathy Living Easy | Tribest

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>