VEVOR RV-50A Amp RV Power Outlet Box Instruction Manual
- June 16, 2024
- VEVOR
Table of Contents
RV-50Ad
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us:
CustomerService@vevor.com
This is the original instruction, please read all manual instructions
carefully before operating.
VEVOR reserves clear interpretation of our user manual. The appearance of the
product shall be subject to the product you received. Please forgive us that
we won’t inform you again if there is any technology or software updates on
our product.
Installation Instructions
Power Outlet Box
Sku#: DGNRV50A1450RJD0NV0
Model: RV-50A
Desc: 50A 125/250V
NEMA: 14-50R
WARNINGI: ELECTRICAL SHOCK AND FIRE HAZARD ！
The outlet is not to be connected to power prlor to installation. Fallure to
comply with thisinstruction could result in an electrical failure, fire and
electrocution.
IMPORTANT: Installation of this power outlet box and related wiring must be
done by aqualified electrician in compliance with all applicable electrical
codes, When being used ttpower a structure, this outlet must be used in
conjunctlon with a transfer switch, Not forindoor use,
When using an engine driven generator, locate away from doors and windows
toavoid the build-up of carbon monoxide from the engine exhaust in enclosed
areas. Installing the Power Outlet Box：
Mount the power outlet box on the outside of the building in a convenient
location, using thethree holes provided in the back of the cabinet, Using
copper wire only and approved wiringmethods, run the wiring through one of
the knockouts in the cabinet to a
junction boxlocated near the transfer switch, If using conduit, pull at least
four colors.
WireGauge: 4AWG~8AWG.Strip the wire insulation 3/5″(15mm,FIG1) (do not tin
conductors) and connect the wires inthe power outlet box as follows. Making
sure there ls no wire insulatlon in any terminal ancthe outlet terminal screws
are tightened to 35 inch-pounds torque using Electric flat Screwdriver.
Cable Color Scheme ：
Black/Red=Load (250 Vlot),the terminals marked “Black” and “Red”
White=W-Neutral Conductor connected to “White”marking terminal
Green=Green power inlet wire to green ground screw terminal on inside of
cabinet. If required, green wire to green ground screw terminal on inside of
cabinet.(FIG2)
Enter installation considerations: Choose one threading hole that suits you the best. (A,B,C,or D)
Technical Support and E-Warranty Certificate
www.vevor.com/support
Power Outlet Box
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and doses not necessarily mean to
cover all categories of tools offered by us.
You are kindly reminded to verify carefully when you are placing an order with
us if you are actually saving half in comparison with the top major brands.
TOUGH TOOLS, HALF PRICE
Technical Support and E-Warranty Certificate
www.vevor.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>