SMARTLED BXLAMP04 Corner Lamp User Manual

CORNER LAMP
User manual
BXLAMP04

Technical information

Power: 12W
Luminous flux: 450 lm
Color: RGBWIC: RGBIC + White
Voltage: 220-240V/50-60hz
Dimensions: 140cm x 40cm
Material: Aluminum + Iron + Silicone
Connection: Bluetooth + WiFi
Voice Assistant: Amazon Echo and Google Home
Compatibility: Android 4.1 / iOS 8.0 and later
App: TuyaSmart and Smart Life

Box contents

3 x pcs of 0.45m aluminum rods
2 x pcs of 0.4m iron brackets
1 x pcs of 1.4m silicone sleeve LED light strip
1 x Smart controller
1 x 40-key IR remote control
1 x Driver 12V 1A 12W EU
1 x Accessory bag: 4 screws + 4 wall studs

Installation

1. Attach the aluminum frames together as a vertical support with the help of the connectors.
2. Insert the light strip into the slot of the vertical support.
3. Insert the end cap into the top of the vertical bracket to seal the frame.
4. Connect the two iron posts on the top bracket to create the base and use the screws to secure the fixation.
5. Test the device by switching it on.

Download the app

• To download the app, scan the QR code.
• You can also search the app in the App Store or Google Play.

https://smartapp.tuya.com/smartlife| https://smartapp.tuya.com/tuyasmart

Register

1. If you don’t have an account in the App, sign up and then sign in with the verification code.
2. Enter your email and click on “Get verification code”. Enter the verification code you will receive in your email.
3. Set the password and press “Finished” to complete registration.
   

Add your device

1. First, turn on the Bluetooth and WiFi of your phone.
2. Open the app and tap “Add Device” or “+” in the top right corner.
3. Select your smart device from the list of devices or use automatic scanning to find it directly.
4. Turn on the device and wait until it flashes to confirm and select the type of flashing.

• If the device does not flash, restart it by following the steps detailed in the App: with the device turned of, switch on, then switch of, switch on, switch of and switch on again and the light will flash. In order for this process to work, it should be done in less than 10 seconds. Confirm and select the type of flashing. 5. Next, select the 2.4 GHz WiFi network, enter the router password and wait while the app finds the device. Once it has been added, tap “Finished”.

Note

1. To ensure a correct synchronization with your mobile phone, it is necessary to accept all the accesses requested by the app.
2. To connect for the first time, you must be connected to a Wifi network. Make sure that the light is flashing quickly and that the WiFi password you entered is correct. (The connection process may take several minutes, please be patient).
3. After the first connection, you can use a new WiFi or mobile data network to control the device at any time and from any location.
4. Only compatible with 2.4 GHZ WLAN, Android 4.1 and above and IOS 8.1 and above. Do not use 5G WiFi.
5. The first connection should be made close to the router to ensure a faster connection.
6. When connecting multiple devices to the WiFi network, do not put them too close together as this may cause signal interference.

Control your device

After successful configuration, the device will be displayed on the “Devices” page. Tap on the device icon to control its operation.
Colour mode

• This option allows you to choose from countless static colours and adjust their brightness from 1 to 100% by simply swiping your finger.
  

Modes

• Choose from a wide variety of scene modes or create your own, selecting the different options provided by the App. These effects are able to synchronize several colors at once, creating unique colour sets.
  

Scene mode

• Choose from a wide variety of pre-designed modes designed for different times of the day.

Music Mode

• The incorporated sensitive microphone is able to synchronize the colours with the music.
• Accept all the accesses requested by the app and make your bars listen to the sound with the rhythm of the music of your mobile phone, television or simply the ambient music.

Planner

• Enter the “Timer” section to set the operating time ranges of the bars. This will keep the light in the ON or OFF position for a specific time.

Voice Assistants

• To set up your voice assistants through the app, you will need to tap on the top right corner and then tap on the “Edit” icon.
• From here you can permit access to third parties to control the bulb, such as Alexa and Google Home.
• You can adjust the brightness, change the colour, or simply turn the light on and of with just a few words.

Remote control

① Brightness
② Static colour
③ Click DIY1/DIY2/DIY3
④ Adjust the brightness of reds, greens and blues
⑤ Music Mode| ⑥ Power Off / On
⑦ Mode
⑧ Speed +
⑨ Speed-
⑩ Scene mode
⑪ Timer
---|---
More brightness| Increase brightness
---|---
Less brightness| Decrease brightness
ON| Switch on
OFF| Switch off
RGBW| Selection of the different colors. R: red; G: green; B: blue; W: white
Static colour| 8 types of static colours
DIY| Click DIY1/DIY2/DIY3 Adjust the brightness of reds, greens and blues
Scene mode| 4 scene modes available
Speed +/-| Adjust the lighting speed
Timer| 1-hour or 2-hour timing function to turn off the light
Music| 4 music modes available

More about the App

You can adjust the different functions from the menu button at the top right corner of the App.

1. The device name can be changed as desired.
2. Device information.
3. Tap-to-Run and Automation allows you to check the Intelligent Automation to which your device is linked.
4. Supported third-party control provides information on how to connect your device with Amazon Alexa, Google Assistant.
5. Disconnection notice: allows you to alert yourself when your device is offine.
6. Create “Group” to control another smart device at the same time.
7. FAQ & Feedback allows users to report issues and obtain assistance.
8. Add to Home Screen allows you to add the smart device to your smartphone’s home screen.
9. Check the network of the device to check the status of the network connection.
10. Firmware information allows you to check the software or install updates on the device.
11. Restore factory settings: Allows you to reset the factory settings of the smart device.

Maintenance recommendations

• Regularly clean the product with a dry cloth.
• The product must be disconnected or switched off when cleaned.
• Keep the connectors and/ or ports free from dust, lint, etc. to prevent improper connections.
• Avoid breaking the device. Do not put objects over it or bend it too strong.
• If the product includes a cable do not bend it too strong and do not pull from it to unplug the product.
• Do not wet the product.
• Keep it always in a dry place, away from humidity.
• When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
• If water enters the product interior, unplug it immediately from any attached power source or device it is connected to.
• Avoid dropping or hitting the product. That might damage it.
• Do not use the product for anything other than its intended use.
• Please recycle the product in accordance with local environmental laws and regulations.

Safety information

Please read the following instructions before using the device for the first time:

• When you use device keep it away from heat sources (fire) and from humidity sources (water and other liquids).
• Do not use the product if it is wet or damaged.
• Do not use the product with wet hands.
• Do not leave the product in contact with flammable materials.
• Do not expose the product to high temperatures (for example: inside a car during hot weather).
• Do not throw the product into fire.
• Keep the product away from children.
• Disconnect or switch off the product if you are not going to use it for a long period of time.
• Do not use the product if you perceive any visible defects.
• Do not attempt to open or puncture the product. You might damage it.
• Do not use the product with incompatible devices.

Legal Note
Hereby, Atlantis Internacional S.L. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC. The features and functions described in this manual are based on tests made by Atlantis Internacional S.L. It is the user’s responsibility to examine and verify the product after its purchase. Atlantis Internacional S.L. is not responsible and will never be liable for any personal loss or injury, economical loss, material loss or any damage due to misuse, abuse or improper installation of the product. Atlantis Internacional S.L. is not responsible and will never be liable for any function, communication and connection failure between the product and Bluetooth enabled devices.

Electronic and electrical devices disposal
This symbol indicates that electrical and electronic equipment is to be collected separately.

• This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
• If the equipment uses batteries, they must be removed from the equipment and disposed in an appropriate collection center. If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualified professional.
• Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
• The final price of this product includes the cost necessary for the correct environmental management of the generated waste.
• For more information, contact the retailer or the local authorities in charge of waste management.

Warranty: The 3-year warranty does not apply to products with consumable parts or parts subject to wear, except for defects in materials or manufacturing.
CE Declaration of Conformity
We hereby declare that the product (s) listed below satisfies the provision for CE-marking according to the following European directive(s):
EN IEC 55015:2019+A11
EN 61547:2009
EN 61000-3-3:2013+A1+A2
EN IEC 61000-3-2:2019+A1
Article: BXLAMP04
EAN: 8427542125947
Manufacturer:
ATLANTIS INTERNACIONAL, S.L.
Address:
Carrer del Crom, 53, 08907 L’Hospitalet de Llobregat, Barcelona (Spain) Place and date of the declaration:

Nico Broder
General Manager

Documents / Resources

| SMARTLED BXLAMP04 Corner Lamp [pdf] User Manual
BXLAMP04 Corner Lamp, BXLAMP04, Corner Lamp, Lamp
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>