Linkstyle A253560 Cordless Electric Air Compressor User Guide

Linkstyle A253560 Cordless Electric Air Compressor

Product Information

Specifications:

• Product Contents:
  • 1 x Loun Smart Air Pump
  • 1 x Flexible hose (Schrader valve head)
  • 1 x Presta valve adapter
  • 1 x Ball pump needle
  • 1 x Swim ring valve adapter
  • 1 x USB-C charging cable
• Storage Hole
• Hose Connector
• LED Light
• USB-C Charging Port
• Unit Display
• Battery Level
• Unit Switch / LED Switch
• Power On/Off
• Measured Pressure
• Preset Pressure Mode Indicator
• Mode Switch
• Preset +
• Preset –
• Charging:
  • Greenlight: 60 ~ 100% charged
  • Yellow light: 30 ~ 60% charged
  • Red light: 0 ~ 30% charged
• Output: 5V 2A, 5V 1.5A

Product Usage Instructions

Power On/Off:
To turn on the inflator, pull out the hose. To turn it off, insert the hose back into the hole. The inflator will automatically shut off when inactive for 3 minutes.

Hose Connection:
Connect the appropriate adapter to the flexible hose based on the valve type of the object you want to inflate. Be cautious when touching the hose as it may be overheated after prolonged use.

Charging:
Connect the air pump to a USB power source using the included USB-C charging cable. It is recommended to use a 5V / 2A adapter to charge the pump. The charging indicator will show the battery level:

• Greenlight: 60% to 100% charged
• Yellow light: 30% to 60% charged
• Red light: 0% to 30% charged

Button Operations:

• U (Unit/light button):
  • Short press to toggle between display units: PSI, BAR, KPA, and kg/cm2
  • Press and hold to turn the flashlight on and off
• M (Mode button): Press to toggle between Car, Motorcycle, Bicycle, Ball, and Custom modes
• Power Button:
  • Short press to start or stop inflation
  • Press and hold for 5 seconds to enter Bluetooth pairing mode
• – (minus button): Press to decrease preset pressure
• + (plus button): Press to increase preset pressure

Start Inflation:
Short press the Power button to start inflation. The Measured Pressure portion of the display will show the current air pressure as it changes. The air pump will generate noise and heat during inflation. Avoid prolonged contact with the hose and hose joints with your hand.

Stop Inflation:
When the measured pressure reaches the preset pressure, the pump will stop inflation automatically. To stop inflation prematurely, press the Power button during inflation.

LED Lighting:
Press and hold the U button to turn the LED flashlight on or off.

Hose Storage:
The hose can be stored within the air pump in the hose receptacle. Do not touch the hose after prolonged working time until it has cooled down.

Measuring Pressure:
After turning on the air pump, connect it to the object you want to measure. The Measured Pressure portion of the display will show the measured pressure.

Resetting the Device:
If the measured pressure is not zeroed when the air pump is on and not connected to an object, press and hold the + and – buttons together for 3 seconds to reset the device.

Smart Functions:
To access smart functions, install the Linkstyle app by scanning the provided QR code and registering a new account on the app if you do not have one.

FAQ:

• Q: How can I reach customer support?
  A: You can reach our customer support team by email at contact@linkstyle.life or by phone at 1-888-419-4888.

If you need any support, don’t hesitate to Nreach out to us at: contact@linkstyle.life
1-888-419-4888

Product Contents

• 1 x Loun Smart Air Pump
• 1 x Flexible hose (Schrader valve head) 1 x Presta valve adapter
• 1 x Ball pump needle
• 1 x Swim ring valve adapter
• 1 x USB-C charging cable

Charging

Power On/Off

The inflator will automatically shut off when it is inactive for 3 minutes

Hose Connection

Hose Storage

Operations

Charging
Connect the air pump to a USB power source using the included USB-C charging cable. It is recommended to use a 5V / 2A adapter to charge the pump.

Charging Indicator

• Green light: 60% to 100% charged
• Yellow light: 30% to 60% charged
• Red light: 0% to 30% charged

Power On
Pull out the air hose and the pump will turn on automatically.

Power Off

• Completely push the air hose back into its receptacle to turn off pump.
• The pump will turn off automatically after 3 minutes of inactivity or when battery is low.

Button Operations

U: Unit/light button

• Short press to toggle between display units: PSI, BAR, KPA, and kg/cm2
• Press and hold to turn flashlight on and off

M: Mode button

• Press to toggle between Car, Motorcycle, Bicycle, Ball, and Custom modes

Power Button:

• Short press to start or stop inflation
• Press and hold for 5 seconds to enter Bluetooth pairing mode

-: minus button

• Press to decrease the preset pressure

+: plus button

• Press to increase the preset pressure

Start Inflation
Short press the Power button to start inflation. The Measured Pressure portion of the display will show the current air pressure as it changes. The air pump will generate noise and heat during inflation. Avoid prolonged contact with the hose and hose joints with your hand.

Stop Inflation

• When the measured pressure reaches the preset pressure, the pump will stop inflation automatically.
• To stop inflation prematurely, press the Power button during inflation.

LED Lighting
Press and hold the U button to turn the LED flashlight on or off.

Hose Storage
The hose can be stored within the air pump in the hose receptacle. Do not touch the hose after prolonged working time until after it has cooled down.

Measuring Pressure
After turning the air pump on, connect it to the object to be measured and the Measured Pressure portion of the display will show the measured pressure.

Resetting the Device
If the measured pressure is not zeroed when the air pump is on and not connected to an object, press and hold the + and – buttons together for 3 seconds to reset the device.

Smart Functions

Install the Linkstyle app
Scan the QR code below to download and install the Linkstyle app. Register a new account on the app if you do not have one.

*Alternatively, you can also search for “Linkstyle” on the Apple App Store or Google Play Store to find the app.

***Important Note:
When registering an account in the Linkstyle app, be sure to set the region to the United States of America.

Add Air Pump to App

1. From the “Devices” page of the Linkstyle app, click the “Add” button to add a new device.
2. Press and hold the Power button on the air pump for 5 seconds until the LED lights start flashing.
3. In the app interface, a prompt to connect the air pump will pop up. Follow the prompt to add the air pump to app.

Notes & Specifications

Note:
This device has been cleaned from the factory. When the difference in altitude or sensor tolerance causes measured pressure to not show zero, cleaning the air pump can improve pressure measurement accuracy.
Attention:

1. Do not leave the device unattended while in use.
2. Keep away from combustibles and explosives.
3. Avoid moisture, sand, and dropping the device.
4. Do not store in extreme temperatures.
5. The device contains a built-in lithium battery. Do not discard or burn.
6. Keep out of reach of children.

Product Specifications

• Model Number: GP2
• Maximum Inflation Pressure: 150PSI
• No-Load Flow: 20L/M
• Charging Temperature: -10 C to 60 C
• Working Temperature: 0 C to 60 C
• Battery Capacity: 2000 mAh, 3.7V, 14.8WH
• Charging Input: 5V/2A
• USB Output: 5V/1.5A
• Charging Time: 2 to 3 hours

Apple and Apple logos are trademarks of Apple, Inc., registered in the U.S. and other countries. App Store is a service mark of Apple, Inc.
Amazon, Alexa, and all related logos are trademarks of Amazon.com Inc. or its affiliates.
Google and Google Play are trademarks of Google LLC. Other third-party brands and names are the property of their respective owners.

Linkstyle.life
Unlocking the enchanted life!

References

• . Spend less. Smile more.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>