LINKSTYLE H2A2370 Matrix Smart Lock Key Box User Guide
- June 14, 2024
- LINKSTYLE
Table of Contents
Matrix Smart Lock
Key Box User Guide
What’s in the box
Product Anatomy
Overview
This device can connect with your smartphone using the Link style app via Bluetooth directly or through a Bluetooth gateway. It has 4 different unlock methods and 2 different installation options depending on your use case.
Unlock Methods:
- Fingerprint unlock
- Passcode keypad unlock
- Smart App unlock
- Keycard unlock
Installation Options:
- Mount to wall with screws
- Lock in place with lock shackle
This device takes 4 AAA batteries for power. If the batteries run out, you can
use a power bank with a micro-USB cable for emergency backup power while you
unlock it and change the batteries.
Battery
Access
Unlock and open the key box Remove this screw to open and access the
battery box
Factory Reset
Press and hold the reset button for 2 seconds until you hear “Please enter
the initialization password.”
Enter 000# on the keypad to complete the reset.
The unlock passcode will be reset to 123456# 
Installation
Mount to Wall
Drill 3 holes into the wall
where the screws will line up| Insert the plastic expansion
plugs into the holes
Attach the device to the wall with the provided screws. Test with 4 AAA
batteries.
Attach to Door Lock
Press the shackle
release button inside the device and take off the shackle.
Then hang the shackle around the cylindrical lock and clip in the device.
Smart Functions
Install the Link style app Scan the QR code below to download and install the
Link style app. Register a new account on the app if you do not have one.
*Alternatively, you can also search for “Link style” on the Apple App Store or Google Play Store to find the app.
***Important Note:
When registering an account in the Link style app, be sure to set the region
to United States of America. Add the device to app
- Make sure that your phone’s Bluetooth function is turned on.
- Open the Linkstyle app, and tap the “Add
- Device” button, and the app will automatically start scanning for devices to add.
- Remove the screw of the battery compartment and install batteries.
- Press and hold the reset button for 2 seconds, then press any button on the keypad to put the device in setup mode.
- The app will automatically detect the device within range, tap on the device icon in the app and follow the on screen instructions to finish adding the device.
Set up unlock methods
In devices page of the Link style app, tap the device to select it. In this
interface, tap and hold the big unlock button to unlock the key .
To set up other unlock methods, tap the settings icon. In the settings menu,
use menu items on top of the page and follow the on-screen instructions to
manage unlock methods:
- Fingerprint Unlock
- Passcode Unlock
- Key Card Unlock
- Temporary Passcodes
Product Specifications
Material: Zinc alloy, ABS, Acrylic
Wireless Protocol: Bluetooth
Supported OS: Android 4.4 + and iOS 7.0+
Power Supply: DC 6V: 4pcs AAA alkaline batteries
Battery Life: 7000 times normal unlock (10 – 12 months)
Static Current: < 50μA
Dynamic Current: <200mA
Unlock Methods: Fingerprint, IC Card, Passcode, App
Unlock Time: 1 to 1.5 seconds
Working Temperature: -4 °F to 122°F (-20 °C to 50 °C)
Working Humidity: 10% ~ 95%
Factory Passcode: 123456 Virtual Password Available
Apple and Apple logos are trademarks of Apple, Inc., registered in the U.S.
and other countries. App Store is a service mark of Apple, Inc.
Amazon, Alexa, and all related logos are trademarks of Amazon.com Inc. or its
affiliates.
Google and Google Play are trademarks of Google LLC. Other third-party brands
and names are the property of their respective owners.
Link style. life
Unlocking the enchanted life!
If you need any support, don’t hesitate to
reach out to us at:
contact@linkstyle.life
1-888-419-4888
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>