Kraus KWDA-200MB Garbage Disposal Air Switch Kit Instruction Manual

: June 16, 2024
: Kraus

Table of Contents

Kraus KWDA-200MB Garbage Disposal Air Switch Kit
Product Usage Instructions
Safety Instructions
Diagram and Parts List
Specifications
Dimensions
Installation and Use
Replacement Parts
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Kraus KWDA-200MB Garbage Disposal Air Switch Kit

Specifications

Input: 125V ac, 60Hz, 3A max
Output: 125V ac, 60Hz, 3A max
Working temperature: -10~50C
Working cycles: 100K
Type 1 Enclosure
Purpose of control: Operating Control
Construction of control: IN-LINE CORD CONTROL
Type 1 Action
Pollution Degree: 2
Impulse Voltage: 1500 V
IP 20

Product Usage Instructions

Safety Instructions

Air Switch is rated for 120V/3 AMPS (1 HP) maximum and must be installed according to national, state, and local electrical code requirements. Consult with a local code professional for the appropriate requirements and additional safety information.
CAUTION – Must not exceed the electrical rating of the air switch or the electrical supply.
CAUTION – Children should not operate this product without constant supervision to avoid the risk of injury.

Working Principle
The first pushing on air button actuates the air switch and the air switch keeps actuating when air button is released. A second push on the air button will release the air switch.

Installation and Use

Step 1. Mount Push Button

Air Control Push Button
Counter

Mount the push button directly through a standard sink hole or drill a minimum 1 1/4 hole.
Place the rubber gasket and metal washer between mounting nut and the bottom of the sink counter.
Tighten the plastic nut under the sink counter to ensure a watertight seal.

Step 2. Mount Power Module

Anchor (if needed)
Screw

Mount the power module to the cabinet wall at least three feet within an electrical outlet and the disposer.
Use three screws to fasten the power module to the cabinet. Use the anchors if needed.

FAQ

Q: What is the maximum electrical rating for the air switch?
A: The air switch is rated for 120V/3 AMPS (1 HP) maximum.
Q: Can children operate this product?
A: Children should not operate this product without constant supervision to avoid the risk of injury.
Q: How should I position the air switch base during installation?
A: The air switch base must be positioned to allow drainage of the electrical component compartment.

Congratulations on the purchase of your new Kraus plumbing fixture!
Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product:

DO NOT RETURN TO STORE
Please contact our Customer Service Team
1-800-775-0703 / customerservice@kraususa.com
Have the model number available and retain a copy of your receipt with purchase date for reference.
If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.

For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or customerservice@kraususa.com

Prior to Installation:

Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement.
Pre-drilled hole size requirement: 1 3/8″ (min) – 1 1/2″ (max)
Max countertop thickness: 1 1/2”

Tools you will need:

Safety Instructions

Air Switch is rated for 120V/3 AMPS (1 HP) maximum and must be installed according to national, state, and local electrical code requirements. Consult with a local code professional for the appropriate requirements and additional safety information.
CAUTION – Must not exceed the electrical rating of the air switch or the electrical supply.
CAUTION – Children should not operate this product without constant supervision to avoid the risk of injury.
The air switch base must be positioned to allow drainage of electrical component compartment.

Diagram and Parts List

Power Module
Push Button Assembly
Rubber Washer
Metal Washer
Mounting Nut
Air Tube Nut x2
Air Tube
Mounting Screws & Anchors

Specifications

KWDA-200 (single-channel control):**
- Input: 125V ac, 60Hz, 3A max;
- Output: 125V ac, 60Hz, 3A max;
Working temperature: is -10~50C;
Working cycles are 100K;
“Type 1 Enclosure”;
Purpose of control: Operating Control; Construction of control: IN-LINE CORD CONTROL;
Type 1 Action;
Pollution Degree: 2;
Impulse Voltage: 1500 V;
IP 20.

Dimensions

Installation and Use

Working principle: The first pushing of the air button actuates the air switch and the air switch keeps actuating when the air button is released. A second push on the air button will release the air switch.

The switch box can be installed horizontally or vertically, but ensure that the switch box is in the right direction during vertical installation.
The recommended length of the installation pipe is less than 2m.

Step 1. Mount Push Button

Mount the push button directly through a standard sink hole or drill a minimum 1 1/4″ hole.
Place the rubber gasket and metal washer between mounting nut and the bottom of the sink counter.
Tighten the plastic nut under the sink counter to ensure a watertight seal.

Step 2. Mount Power Module

Mount the power module to the cabinet wall atleast three feet within an electrical outlet and the disposer.
Use three screws (8) to fasten the power module to the cabinet. Use the anchors if needed.

Step 3. Attach Air Tube

Attach air tubing between the push button and power module.
Make sure the two sides of the air tube have been connected. Tighten the air tube nut on the push button and power module until snug.

Step 4. Plug in Power Module

Plug the power module into a dedicated, grounded 120V AC outlet which is continuously energized.

Step 5. Connect Power Module and Disposer

Plug the disposer cord in the power module.
Press the push button to ensure that the Countertop Switch can turn the disposer on and off.
Be sure that the control system is operating properly before using the unit.
One push on, another push off. If you have any problem, please feel free to contact Customer Service.

CAUTION Disposer may start when the disposer cord is plugged into the power module. Push the Countertop Switch button once to stop the disposer.

Replacement Parts

Warranty

Accessories

Kraus USA Plumbing, LLC (“Kraus”) extends this warranty to the original purchaser for personal household use of the Accessories when purchased from an authorized Kraus dealer and in the location of original installation. This warranty is non-transferable.
Kraus warrants the structure and finish of the Accessories to be free from defects in material and workmanship under normal usage for one (1) year from the date of purchase.
Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus.

Commercial Warranty
Kraus USA Plumbing, LLC (“Kraus”) warrants its Products for one (1) year to commercial purchasers of Products used in industrial, commercial and business applications.

Care and Cleaning Instructions
Certain cleaning products may cause damage to a Product’s finish and use of the following on the Product will void this warranty:

Abrasive cleaners such as powders, bleach, ammonia, alcohol or chorine
Abrasive pads, steel wool or wire brushes

What is Not Covered
This warranty does not cover Products that were discontinued when purchased or display Products, whether such Products were purchased at discount outlets, unauthorized dealers, and/or sold on clearance. This warranty does not cover any free gifts included with purchase.
This warranty does not cover damage resulting from neglect, misuse (including use for an unintended application), abuse, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, improper maintenance, alteration of the Product, or failure to follow care, cleaning or installation instructions enclosed with your Product. Kraus recommends that all Kraus Products be installed by a fully licensed and insured trade professional with experience in the installation of bathroom and/or kitchen manufactured goods.

Download the Kraus Care & Maintenance Guide at: http://www.kraususa.com/maintenance

How to Make a Warranty Claim

If you are a consumer purchaser, please contact a Kraus Customer Service Representative at:
Kraus USA Plumbing, LLC
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
Customerservice@kraususa.com

If you are a plumbing contractor or trade professional, please contact a Kraus Pro Representative at:
Kraus USA Plumbing, LLC
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
Proservice@kraususa.com

If you are an authorized partner, please contact a Partner Support Representative at:
Kraus USA Plumbing, LLC
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
Partnersupport@kraususa.com

In requesting warranty service, please be ready to provide your proof of purchase and a description of the problem. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.

Limitation on Duration of Implied Warranties
Please note that some states/provinces (including Quebec) do not allow limitations on how long an implied warranty lasts, so the below limitations may not apply to you. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ANY IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO THE STATUTORY PERIOD OR THE DURATION OF THIS WARRANTY, WHICHEVER IS SHORTER.

Limitation of Special, Incidental or Consequential Damages
Please note that some states/provinces (including Quebec) do not allow the exclusion or limitation of special, incidental or consequential damages, so the below limitations and exclusions may not apply to you. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER, AND KRAUS USA PLUMBING, LLC SHALL NOT BE LIABLE FOR, ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LABOR CHARGES TO REPAIR, REPLACE, INSTALL OR REMOVE THIS PRODUCT), WHETHER ARISING OUT OF BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, BREACH OF CONTRACT, TORT, OR OTHERWISE.
This warranty gives you specific legal rights, and you may also have other rights that vary from state/province to state/province.

Register Your Kraus Product
Activate Your Warranty
Access Premium Customer Support
Get Product Information
REGISTER TODAY http://www.kraususa.com/registration

www.kraususa.com

www.kraususa.com
Toll Free: 1.800.775.0703
© 2023 Kraus USA Plumbing LLC
REV. November 15. 2023