Tenda TEF1118P-16-150W/TEF1126P-24-250W PoE Switch Installation Guide
- June 4, 2024
- Tenda
Table of Contents
Tenda TEF1118P-16-150W/TEF1126P-24-250W PoE Switch
Package Contents
- Switch *1
- Power cable *1
- Pad *4
- Screw *6
- L-shaped bracket *2
- Installation Guide *
If any item is incorrect, missing, or damaged, please keep the original package and contact the vendor for replacement immediately.
Get to Know Your Device
Connecting Devices
LED Indicators
| LED Indicator | State | De sc ription |
|---|---|---|
| G1 | Solid on | The port is connected. |
| Blink ing | The port is transmitting or receiving data. | |
| Off | The port is not connected or the connection is faulty. | |
| Link/Act | Solid on | The port is connected. |
| Blinking | The port is transmitting or receiving data. | |
| Off | The port is not connected or the connection is faulty. | |
| SFP1 | Solid on | The port is connected. |
| Off | The port is not connected or the connection is faulty. | |
| PoE-MAX | Solid on | The total PoE power output reaches the alarm threshold and |
the power supp lies of powered devices arenormal.
Blinking| The total PoE power output exceeds the a.larm threshold and the
power supplies of some powered devices are faulty.
Off| The total PoE power output has not reached the alarm threshold and the
power supplies of powered devices are normal.
Power| Solid on| The switch has been powered on properly.
Off| The switch is not powered on or the power supply is faulty.
Ports and Switches
| Port/Switch | Name | Description |
|---|---|---|
| 1~16/24 | Downlink ports | 10/100 Mbps auto-negotiation PoE ports for supplying |
power to and exchanging data with powered devices compliant with the IEEE
802.3at and IEEE 802.3at standards.
G1| Uplink electrica port| 10/100/1000 Mbps auto-negotiation non-PoE port for
connecting to a router or core switch.
SFP1| Uplink optical port| Independent 1000 Mbps SFP port for connecting to a
router or core switch.
CCTV Standard VLAN Extend| Network mode switch| CCTV: In this mode, the
port cache is optimized and PoE ports 1-8 have higher priorities over the
other ports. If multiple IP cameras are connected to the switch, you are
recommended to enable this mode and connect the G1 or SFP1 port of this switch
to the upstream device to which the monitoring computer connects. This ensures
smoother monitoring video playback. All the ports of the switch can
communicate with each other.
Standard (Default): In this mode, the switch functions as a common
unmanaged switch and all the ports of the switch can communicate with each
other.
VLAN: In this mode, the downlink PoE ports of the switch canno communicate
with each other, but can communicate with the Gl and SFP1 ports.
Extend: In this mode, the data rate of each of PoE ports 1-8 is limited
to 10 Mbps, whereas the maximum transmission distance of the port is increased
to 250 meters. All the ports of the switch can communicate with each other.
*In Extend mode, you are recommended to reduce code stream to below 8 Mbps to
ensure fast video data transmission.
AC 100-240V 50/60Hz| Power jack| Connected to a power receptacle using the
power cable included with the package to supply power to the switch.
| Grounding terminal| Connected to a protection ground cable for lightning
protection.
Appendix A Specifications
| Model | TEF1118P-16-1 SOW | TEF1126P-24-250W |
|---|---|---|
| Port |
10/100 Mbps RJ45
| 16| 24
10/100/1000 Mbps RJ45| 1|
1
SFP (independent)
| 1| 1
lightning protection|
6kV
Mode
| CCTV: In this mode, the port cache is optimized and PoE ports 1-8 have
higher priorities over the other ports. If multiple IP cameras are connected
to the switch, you are recommended to enable this mode and connectthe G1 or
SFP1 port of this switch to the upstream device to which the monitoring
computer connects. This ensures smoother monitoring video playback. All the
ports of the Port switch can communicate with each other.
Standard (default): In this mode, the switch functions as a common unmanaged
switch and all the ports of the switch can communicate with each other.
VLAN: In this mode, the PoE ports of the switch cannot communicate with each
other, but can communicate with the G1 and SFP1 ports.
Extend: In this mode, the data rate of each of PoE ports 1-8 is limited to 10
Mbps, whereas the maximum transmission distance of the port is increased to
250 meters. All the ports of the switch can communicate with each other.
Performance| Store-and-forward| Support
MAC address table| 4k
MAC address learning| Automatic learning/Aging
Backplane bandwidth| 7.2 Gbps| 8.8Gbps
PoE| PoE power supply standard| IEEE 802.3af and IEEE 802.3at
PoE power cable core| 8 cores
PoE port| 1-16| 1-24
Maximum power output of one port| 30W| 30W
Maximum power output o f switch| 35W| 225W
Dimensions (L x W x H)| 294mm178.8mm44mm| 294mm215mm44mm
Model| TEF1118P – 16 – 150W| TEF1126P –
24 – 250W
---|---|---
Input Voltage| 100~240V AC, 50/60Hz
Environments| Operating environment| Operating temperature: 0°C -40°C
Operating humidity: 10% – 90% RH, n o n – co n den sing
Storage environment| Storage temperature: -40°C-70°C
Storage humidity: 5%-90%RH, non-condensing
Data Rate| Ethernet: 1O Mbps (half-duplex)/20 Mbps (full-duplex) Fast
Ethernet: 100Mbps (half-duplex)/200 Mbps (full-duplex) Gigabit Ethernet: 2000
Mbps (full-duplex)
Network Medium| Ethernet: CAT3 or better UTP/STP cable Fast Ethernet: CATS or
better UTP/STP cable Gigabit Ethernet: CATSE or CAT6 UTP/STP cable
(recommended) 1000Base-SX: MMF 1000Base-LX: MMF or SMF
Network Standard| IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 80 2.3af, IEEE
802.3at, IEEE 80 2.3x , and IEEE 802.3z
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
NOTE: (1) The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment.
(2) To avoid unnecessary radiation interference, it is recommended to use a
shielded RJ45 cable.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: (1) The manufacturer is not responsible for any radio or TV
interference caused by unauthorized m odifications to this equipment.
(2) To avoid unnecessary radiation interference, it is recommended to use a
shielded RJ45 cable.
RECYCLING
This product bears the selective sorting symbol for Waste electrical and
electronic equipment (WEEE).
This means that this product must be handled pursuant to European directive
2012/19/EU in order to be recycled or dismantled to minimize its impact on the
environment. User has the choice to give his product to a competent recycling
organization or to the retailer when he buys new electrical or electronic
equipment.
Producto| NOMBRE DEL PRODUCTO:
Switch de 16 puertos 10/100Mbps + 1 Gigabit / SFP con 16 puertos PoE
Modelo: TEF1118P-16-1S0W
---|---
Alim ent ador de Energfa: TEF1118P-16-1S0W Alimentaci6n: 100-240 ca 50Hz/
60Hz, 2.0A Salida: 53.SV cc 2.8A|
PAIS DE ORIGEN: CHINA
Producto| NOMBRE DEL PRODUCTO:
Switch de 24 puertos 10/1 00Mbps + 1 Gigabit/SFP con 24 puertos PoE
Modelo: TEF1126P-24-250W
---|---
Alimentador de Energfa: TEF1126P-24-250W Alimentaci6n: 100-240 ca 50Hz/60Hz,
4.0A
Salida: 53.SV cc 4.7 A|
PAIS DE ORIGEN: CHINA
Technical Support
United States Hotline: 1-800-570-5892
Canada Hotline: 1-888-998-8966
Hong Kong Hotline: 00852-81931998
Skype: Tendasz
Website: http://www.tendacn.com
E-mail: support@tenda.com.cn
Address Info: 6-8 Floor, Tower E3, No.1001, Zhongshanyuan Road,
Nanshan District, Shenzhen, China. 518052
Copyright
©2017 Shenzhen Tenda Technology Co., Ltd. All rights reserved.
Tenda is a registered trademark legally held by Shenzhen Tenda Technology Co.,
Ltd. Other brand and product names mentioned herein are trademarks or
registered trademarks of their respective holders. Specifications are subject
to change without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>