CHWARES JX-911 Ultrasonic Cleaner Instruction Manual

CHWARES JX-911 Ultrasonic Cleaner Instruction Manual

Introduction to Product Components and Functions

1. Upper cover
2. Pilot lamp
3. Stainless steel liner
4. hull
5. DC power connector
6. Power button

Product Technical Parameter Table

Scope of Application

Operation steps

no water will damage the machine

Connect the power supply and enter the standby state.

1. Open the upper cover, pour clean water into the stainless steel inner tank, and put the items to be cleaned into the water. (The parts of the article that need to be cleaned are fully immersed in the water, while the water level must not exceed the maximum water line “MAX-“)

2. Press the switch button once and the machine starts to work with a “sizzle” sound. The cleaning will be finished in 3 minutes. During the cleaning process, press the switch once to stop the machine working, press it again to keep the machine working.

3. After finishing the cleaning, pour out the water in the inner tank, then wipe clean the tank and the machine body with a soft cloth. Store the machine in a dry and flat place.

Note:

• When cleaning, the lens of the glasses should be placed upward. Do not touch the stainless steel tank directly.
• Do not add water directly from the tap, which may cause electric shocks and malfunctions.
• The squeaking sound during the cleaning process is the sound of ultrasonic vibration, which is a normal phenomenon.
• After each cleaning, make sure to pour out the water in the machine, even if it is only used once.
• When the machine has been used at three times in a row, leave a 5 minutes of pause to cool its system to avoid overheating and causing malfunctions, then the normal use can be resumed.

Please do not disassemble the product if you are non- professional.

Cleaning time

damage to items and blades drop, especially cleaning the outer blade for a long time.
Rulers, scissors, pens, etc.
Toothbrush, Shaver, comb, etc.
Rings, necklaces, earrings, etc.
Metal tableware, ceramic tableware, dentures, etc

Problems that need to be paid attention to when cleaning

• It may not be able to completely remove tartar, sallow, dark spots, and smoking remaining etc in the dentures.
• It may not be possible to clean the sedatives fixed in the dentures.
• Discoloration and rusting of metals and metals cannot be removed.
• When cleaning necklaces/rings with gems/diamonds glued together, the gems/diamonds may fall off
• When cleaning the metal watchband, please remove the watchband from the main body of the watch before cleaning, only use cleaning fluid or cleaning water. Do not put the watch (including waterproof type) into the cleaner, it may cause the water enters inside the watch body and the ultrasonic vibration power causes damage to the internal parts of the watch body.
• When cleaning the glasses, the lens should be placed upward, and the cleaning time is 1-3 minutes.
• When cleaning stubborn stains, the cleaning solution can be evenly applied to the lens, and then put into the water, the cleaning effect is better.
• Since the coating technology has not yet broken through, the glasses with the lens filming or frame coating process, please first consult the optical shop to confirm whether it can be used for ultrasonic cleaning, so as to avoid unnecessary losses.

1. Pearl jewelry, jade, gems with soft surface hardness, objects with serious cracks, wooden products with poor plating and finishing are not suitable for cleaning.
2. Whether Lacquerware and some valuables can be cleaned, please consult before cleaning.

Safety Precautions

In order to avoid fire, electric shock, and personal injury, please be sure to comply with the following requirements; Or please follow the relevant national and local electrical regulations

1. Ultrasonic working environment: ambient temperature requirements 0°C-50°C
2. Cleaning fluid requirements: It is forbidden to use liquids that are corrosive to stainless steel and ABS plastics as cleaning fluids. The temperature of the lotion should not exceed 60°C.
3. The continuous working time of the machine shall not exceed 15 minutes, and there must be a break.
4. Requirements for placing the machine: If it has not be used for a long time, make sure to wipe clean the machine and store in a dry place. Remember that there should be no liquid in the machine when it is stored.
5. This product cannot be used as the children’s toy, and children are not allowed to use this product without supervision.

Cleaning and maintenance

1. When cleaning and maintaining, please disconnect the power plug first.
2. Wipe the surface of the machine with a damp cloth, and then wipe off the water with a dry cloth.
3. Do not let water into the switch and power connection.

Certificate of Conformity

Product name: Intelligent ultrasonic cleaner
Model:
Inspectors : **
Test result:**

WARRANTY CARD

Warranty notes

Thank you very much for purchasing this product! The relevant certifications of our products are complete, and all products have been strictly tested before delivery From the date of purchase, we promises to provide “one-year warranty, lifetime maintenance” service, but the return freight is borne by the buyer, and the maintenance service outside the warranty scope will be charged according to the actual situation.

The following situations are not covered by the one-year free warranty:

1. Exceeding the warranty time;
2. All man-made damage;
3. Failure to operate, maintain, and keep in accordance with the product instruction manual causes damage;
4. The user disassembles the machine for maintenance without permission;
5. Without this warranty card or altering the warranty card without authorization;
6. The product model on the warranty card does not match the actual product;
7. Damage caused by force majeure during use, such as floods, earthquakes, etc.

Return & exchange Precautions

Please complete the return and exchange content, reason, model, purchase time, contact person, phone number, consignee address, and strengthen the packaging before sending back. Please ensure that the packaging of the tank of the returned machine is complete and clean. If the tank or the appearance is dirty, scratched, deformed and other factors that affect the secondary sales, the return will not be refunded. If the product is damaged due to packaging problems, the warehouse will directly refuse to receive the parcel with freight collect. Thank you for your cooperation!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>