AAOBOSI MGG-100 Meat Grinder Electric Instruction Manual

AAOBOSI MGG-100 Meat Grinder Electric

DESCRIPTION

1. Food tray
2. Body
3. ON/OFF button
4. REVERSE button
5. Unlock button
6. Food pusher
7. Grinder head
8. Auger
9. Grinding plate(coarse}
10. Grlndlng plate(medlum)
11. Grinding plate (fine)
12. CAP
13. Cutting plate (sector)
14. Cutting blade
15. Sausage stuffer tubes
16. Kibbe attachment

IMPORTANT SAFEGUARDS

• It is for household use,
• Unplug when assembling and disassembling the unit.
• Close supervision is necessary when any appliance is used near children.
• When carrying the unit be sure to hold the motor housing with both hands. Do not carry the unit by holding only the hopper plate or head.
• Do not fix the cutting blade and grinding plate when using kubbe attachment.
• Never feed food by hand. Use food pusher.
• Do not grind hard food such as bones, nuts, etc.
• Do not grind ginger and other materials with hard fiber.
• When grinding the frozen meat. please let it unfreeze completely, then grind
• Continuous running of the meat grinder should be not more than 10 minutes with the motor cool down to room temperature before switching it on again.
• The reverse function is prohibited while the appliance is o?rating (For example switch the”ON” knob to the “R” knob or on the contrary), wait at least one minute until the grinder has come to a complete stop, other­wise, it may cause an abnormal noise, vibration or a transitory electric spark in the appliance. It could result easily damage to the appliance and make a user frightened.
• To avoid jamming, do not force to operate the unit with excessive pressure. Appliances can be used by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and if they understand the hazards involved. Children shall not play with the appliance. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid a hazard.
• When the circuit breaker activates, do not switch on.
• Appliance will cut off power when the current is over the rated current. Let the appliance cool down and then use it again.
• Never try to replace the parts and repair the unit by yourself.

INSTRUCTION FOR USE

For the first time

• Check that voltage indicated on the rating label corresponds the mains voltage in your home.
• Thoroughly wash all parts (except body) in warm soapy water.
• Before plug in.make sure the key buttons are not in the state of being pressed down. That is the natural state of all keys.

Installing

• hold the grinder head and insert it into the inlet, (see fig.l), then fix the grinder head by using fasten knob. Turn the knob clockwise so that the head being fastened tightly. (fig.2)
• Insert the auger into the grinder head, long end first (fig.3).
• Place the cutting blade onto the auger shaft with the blade facing the front as illustrated in ‘install cutting blade’ sectionlf it is not fitted properly, meat will not be minced.
• Place the desired grinding plate next to the cutting blade, Align protrusions of cutting blade with the slot on the head.(fig.5).
• Support or press the centre of the grinding plate with one finger then screw the CAP clockwise with another hand (fig.6). Do not over tighten.
• Place the food tray on the head and fix it into position. (fig.7)
• locate the unit on a firm place.
• The air passage at the bottom and the side of the motor housing should be kept free and not blocked.

Install cutting blade

Mincing meat

• Cut all foods into pieces (Sinewless, boneless and fatless meat is recommended, approximate size :20 x 20x 60 mm/0,8×0.8×2.4inch) so that they fit easily into the inlet of food tray.
• Plug in and turn the “ON/OFF” switch to “ON” position.
• Feed meat into the feeding inlet via using food pusher
• After use switch the unit off and unplug it from the power supply.
  Note: when grinding the frozen meat. please let it unfreeze completely, then grind.

Reverse function

• In case of jamming switch the appliance off by turning the “reverse· switch.
• Feed screw will be rotating in the opposite direction, and the head will get empty.
• If it doesn’t work, switch the unit off and clean it.

MAKING KUBBE

STUFFING

• Mince mutton once or tw,ce.
• Fry onion until brown and add minces mutton all spice, salt and four.

OUTLET COVER

Powdered red

penner

| to your taste
Penner| to vour taste

• Mince meat three times and mix all ingredients together in a bowl.
• More meat and less flour for outlet cover create better consistency and taste.
• Grind the mixture three times.
• Disassemble the grinding plate and cutting blade.
• Place kibbe attachments A and B onto the auger shaft together, fitting protrusions in the slots (fig.a).
• Screw cap into place until tight.
• Do not over tighten (fig.9).
• Make the cylindrical outlet cover (fig.10).
• Form kibbe and illustrated below and deep fry.

MAKING SAUSAGE

• Before starting, please select the appropriate size of nozzles, and then assemble it as per following (fig.11-A, 11-8 or 11-C).
• Operate the steps according to the instructions of MINCING MEAT which mention above.

CLEANING AND MAINTENACE

DISASSEMBLING

• Make sure that the motor has stopped completely.
• Disconnect the plug from the power outlet.
• Disassemble by reversing the steps from 1-6 pictures.
• To remove the grinding plate easily, place a screwdriver between the grinding plate and thehead as illustrated and lift it up (fig.12),
• Press the unlock button before removing the head. Holding the head, rotate it in the same direction as fig.14. Then the head can be removed easily.

ACCESSORIES STORAGE

• The storage compartment is on the back of the unit as picture (A-1 ).
• Push the cover of storage compartment to open it as picture (A-2).
• Put the clean accessories (such as blade, cutting plates, sausage attach­ment, kibbe attachment) into the storage compartment as picture (A-3).

CLEANING

• Remove meat, etc. Wash each part in warm soapy water. Do not wash the parts in dishwaher!
• A bleaching solution containing chlorine will discolor aluminum surfaces.
• Do not immerse the motor housing in water, but only wipe it with a damp cloth.
• Thinners and petrol will crack or change the color of the unit.
• Wipe all the grinding plates by vegetable oil -wet cloth.
• Before you clean the appliance, switch the appliance off and remove the plug from the socket.
• Never clean the unit by a dishwasher. Wash all the metal parts in water below SOC and dry, in case the unit is
• left unused for a long period of time, wipe them by vegetable oil -wet cloth.

SPECIFICATION

TROUBLESHOOTING

The Grinder Head becomes stu ck

__

during grindingprocess

| L the quantity of ing redients pushed down the  “Grni der Head”  is too much. Ensure you have sliced the meat into 20mmX 20mmcubes to all ow thethemto easily fi t down the Grinder Head.

2. Dislodge an y blockagespressthe “REV” button for 3-6 seconds. Then switch off the

Meat Grinder and try ag ain.

The meat grinder is too noisy

__

during use

| Check  that  all  removable  components  have

__

beencorrectly fitted by following the assembl y

insuuctions.

The meat grinder stops during operation| Do not use continuousty for more than 10 minutes at a time. Switch the appliance off and unplug after 10 minutes period and allow to

cool before continuing.

---|---
Thereare small me tal filings within

__

theextruded meat.

| 1.    Before using, pl ease clean all parts

__

thoroughly except themotor housing.

__

2. Do not wash the parts which are not

__

dishwashersafe in a dishwasher.

__

3.           Any problem, pleasecontact the supplier.

WARNING

Never attempt to remove a blockage using metal implements such as knives or with your fingers. Turn off the appliance and disconnect from the mains before removing a blockage.

RoHS

The device meets the requirements of Regulation 2014/30/EU as well as the applicable standards EN IEC 55014-1:2021, EN IEC 55014-2:2021, EN IEC 61000-3-2:2019/A1:2021. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Manufacturer:

Foshan Shunde Yeekai Electrical Co., Ltd.

• Address: No.203, Building 1 of Zhifu Zone, No.8 of 2nd Ring Road, Xingtan Town, Shunde District, Foshan City, Guangdong Province, China.
• Contact: Kelly
• Telephone: +1 (838) 9009806
• E-Mail: info@iaobosi.com

EC Representative:

• Name: APEX CE SPECIALISTS LIMITED
• Address: UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND
• Contact: Wells
• Telephone: +353212066339
• E-Mail: info@apex-ce.com

WARRANTY

• Thank you for choosing AOBOSI product. We sincerely hope that you are satisfied with it.
• The manufacturer’s warranty covers the product for a period of 12 months from the date of purchase against manufacturing faults. All warranties are automatically kept track of in our system, so there is no need to register your product.
• Agent/Distributor is welcome to contact us. Email: info@iaobosi.com.
• Any help or questions during use, please contact us via website www.iaobosi.com, send email to info@iaobosi.com, we will service you within 24 hours.
• We suggest to provide a warranty card, a photo or a video if there’s a broken spare part or not working machine so that we can be much more clear about your problems and offer you the best solution.

AOBOSI Warranty Card

• Item name:———————————–
• Model:——————————————
• Serial No.:————————————–
• Store name:————————————-
• Purchase date:———————————
• Buyer’s name:———————————-
• Email:——————————————-
• Address:—————————————-
• Telephone:————————————

Please fill in the table and email it within 10 days from the date of purchase.

FREQUENTLY ASKED QUESTIONS

What is the rated power of the AAOBOSI MGG-100 Meat Grinder Electric's motor?

The rated power of the motor is 500W.

What is the maximum locked power that the AAOBOSI MGG-100 Meat Grinder Electric can deliver?

The maximum locked power is 3000W.

How much meat can the AAOBOSI MGG-100 Meat Grinder Electric grind per minute?

It can effortlessly grind up to 3 pounds of meat per minute.

What accessories come with the AAOBOSI MGG-100 Meat Grinder Electric for versatile performance?

The accessories include 2 cutting blades, 3 size grinding plates, 1 fan plate, 3 sausage kits, 1 kibbe attachment, and 1 food pusher.

What culinary possibilities can be achieved with the sausage stuffing tube and kibbe attachment of the AAOBOSI MGG-100 Meat Grinder Electric?

The sausage stuffing tube and kibbe attachment offer the ability to make delicious sausages or stuffed kibbe effortlessly.

How does the AAOBOSI MGG-100 Meat Grinder Electric contribute to convenient storage in the kitchen?

It features a spacious storage box that conveniently stores 2 blades, 3 cutting plates, and 1 kibbe kit, keeping the kitchen neat and organized.

What is the recommended method for cleaning the AAOBOSI MGG-100 Meat Grinder Electric?

Disassembling the parts for hand washing and wiping with a cloth is recommended to prevent oxidation and discoloration of aluminum alloy parts. Stainless steel blades and grinding plates are dishwasher safe.

What safety features are included in the AAOBOSI MGG-100 Meat Grinder Electric?

Essential safety features include overheat protection and a circuit breaker, guarding against motor damage from electrical surges.

Is the housing of the AAOBOSI MGG-100 Meat Grinder Electric made of stainless steel?

Yes, the housing is made of stainless steel.

What is the color of the AAOBOSI MGG-100 Meat Grinder Electric?

The color is silver.

What is the capacity of the AAOBOSI MGG-100 Meat Grinder Electric?

The capacity is 3 pounds.

What are the recommended uses for the AAOBOSI MGG-100 Meat Grinder Electric?

The recommended use is for grinding.

What is the voltage requirement for the AAOBOSI MGG-100 Meat Grinder Electric?

The voltage requirement is 110 Volts.

Can you provide the package dimensions for the AAOBOSI MGG-100 Meat Grinder Electric?

The package dimensions are 15.51 x 11.73 x 7.64 inches.

What is the weight of the AAOBOSI MGG-100 Meat Grinder Electric?

The weight is 10.08 pounds.

DOWNLOAD THE PDF LINK:AAOBOSI MGG-100 Meat Grinder Electric Instruction Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>