AeroCool V2 Dryft Mini Midi Tower ATX Case Installation Guide
- June 16, 2024
- AeroCool
Table of Contents
**AeroCool V2 Dryft Mini Midi Tower ATX Case Installation Guide
**
Front I/O Cable Connection Accessory Bag Contents USB3.0
Front I/O Connectors
Please refer to the motherboard’s manual for further instructions).
Note : Specifications may vary depending on your region. Contact your local retailer for more information.
Accessory Bag Contents
- x 18 SSD Screw MB Screw
- x 9 PSU Screw PCI Screw
- x 9 HDD Screw
- x 3 MB Standoff
- x 5 Cable Tie
- x 1Controller board
How to Install
Install Motherboard
Install PSU
Install Add-on Card
Install 3.5” HDD x1
Install 2.5” SSD x2
Install Top Fans
Install Side Fans
Install Bottom Fans
**Install Rear Fan
Install Top Radiator
Install Side Radiator
Install Bottom Radiator
Install Rear Radiator
**Hold LED control button for 3 sec to swich between motherboard and button control Hold LED control button for 6 secs to turn off LED and press once to turn it back on
Note :
Specifications may vary depending on your region Contact your local retailer
for more information. To learn more about how to connect your ARGB, please
visit the product page at aerobically
| |
---|---|---
1| 100%| 100%
2| 80%| 80%
3| 0%| 80%
For ARGB Version (RGB Fan Hub)
Connection Set Up User Guide
For ASUS Aura Sync, MSI Mystic Light Sync, and GIGABYTE RGB Fusion
Motherboards
- Connect (A) to motherboard’s PWM socket
- Connect (B) to motherboard’s Addressable RGB socket
- Connect (C) to PSU’s SATA connector
For Non-Addressable RGB Motherboards
- Connect (A) to motherboard’s PWM socket
- Connect the 2-Pin LED button connector (E) with your hub.
- Connect (C) to PSU’s SATA connector
Use the RGB fan connectors (F) to connect the Addressable RGB fans with your hub.
References
- AeroCool - AeroCool
- Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>