COMFORTHEAT CATE-80 Aluminium Heating Mat Instructions
- June 16, 2024
- Comfortheat
Table of Contents
COMFORTHEAT CATE-80 Aluminium Heating Mat
Station specific
- Product Name: CATe-80
- Type: Aluminium Heating Mat
- Output: 80 W/m2
- Usage: Dry room heating
- Installation Method: Dry installation (without adhesive/glue)
- Suitable for: New or renewable heated floors
Product Usage Instructions
Installation Location
The CATe-80 heating mat can be laid directly under parquet, parquet board,
or laminate in various locations such as:
- Kitchen
- Lounge
- Children’s room
- Other premises
Installation Method
To install the CATe-80 heating mat, follow these steps:
- Ensure the subfloor is clean, dry, and free from any debris or irregularities.
- Roll out the heating mat over the desired area. The mat can be cut to fit if necessary.
- Connect the mat to the appropriate power source according to local electrical codes and regulations.
- Ensure the connection cable is properly secured and protected.
- Cover the heating mat with the chosen flooring material (parquet, parquet board, or laminate) using a dry installation method.
- Test the heating system to ensure it is functioning correctly before applying any additional flooring or coverings.
Frequently Asked Questions
Q1: Can the CATe-80 heating mat be used for wet room heating?
No, the CATe-80 heating mat is specifically designed for dry room heating and should not be used in wet areas such as bathrooms or saunas.
Q2: What is the maximum temperature the CATe-80 heating mat can reach?
The CATe-80 heating mat has a maximum temperature rating. Please refer to the technical data section of the user manual for the specific value.
Q3: What is the warranty period for the CATe-80 heating mat?
The warranty period for the CATe-80 heating mat depends on the specific product variant. Please refer to the product list section of the user manual for the corresponding warranty information.
CATE-80 is a twin conductor, an aluminium heating mat of 80 W/m2 output for “dry” room heating. It is suitable for the installation of a new or renewable heated floor. It can be laid directly under laminate or parquet using “dry” installation method (without adhesive/ glue)
Installation:
It can be laid directly under parquet, parquet boardor laminate in a kitchen,
lounge, children’s room or other premises
Technical data
Product list
