SEALEY AP6150.V3 Racking Unit with 5 Shelves Owner’s Manual
- June 16, 2024
- SEALEY
Table of Contents
AP6150.V3 Racking Unit with 5 Shelves
Owner’s Manual
AP6150.V3 Racking Unit with 5 Shelves
RACKING UNIT WITH 5 SHELVES
(150KG CAPACITY PER LEVEL)
model no: AP6150.V3 & AP6150GS.V3
Thank you for purchasing a Sealey product. Manufactured to a high standard,
this product will, if used according to these instructions, and properly
maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR
THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE
AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE
INSTRUCTIONS SAFE FOR FUTURE USE.
SAFETY
‰ WARNING! ensure Health & Safety, and local authority regulations are
adhered to when assembling and using this rack.
locate rack in a suitable area where it will not be an obstruction.
Keep the general area clean, uncluttered and ensure there is adequate
lighting.
‰ WARNING! erect rack on a level and solid surface such as concrete.
Keep children and unauthorised persons away from the storage area.
DO NOT use the rack for any purpose other than that for which it is are
designed.
DO NOT site the rack out of doors.
DO NOT get the rack wet or use in damp or wet locations or areas where there
is condensation.
DO NOT clean the shelf supports with any solvents which may damage the
surface.
Ensure that the rack is properly assembled before loading them with heavy
items.
‰ WARNING! maximum load for each shelf is 150kg.
Where possible the rack should be fixed to the wall with suitable fixings
Place heavier items on the lower shelves.
Heavier items should be evenly distributed across the shelves.
INTRODUCTION
Steel/galvanised frame with five Mdf shelves (AP6150 painted/AP6150GS galvanised). 150kg capacity per level giving a maximum capacity of 750kg per rack. no nuts and bolts for easy assembly. Clips together in minutes. Two piece uprights allow use as a single bay rack, or split in two separate shelf systems or workstations.
SPECIFICATION
model no……………………. …………… AP6150.V3/AP6150GS.V3
Coating……………………………….. ……………….. Paint/Galvanised
Height……………………………. ………………………………….1800mm
Width………………………………. ………………………………….800mm
depth………………………………. ………………………………….300mm
Weight ……………………………………………………………………. 11kg
Capacity per shelf ……………………………………………………150kg
CONTENTS
Carefully unpack the product and check the contents against the list below.
Should any items be missing or damaged make immediate contact with your Sealey
stockist.
Assembly
Parts support is available for this product. Please log on to
www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and component parts without
prior notice.
Important: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is
required for any claim.
Sealey Group, Kempson Way, Suffolk business Park, bury St Edmunds, Suffolk.
IP32 7AR
01284 757500
01284 703534
sales@sealey.co.uk
www.sealey.co.uk
© Jack Sealey limited
Original Language Version
AP6150.V3, AP6150GS.V3 | Issue 1 07/11/18
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>