HP200 EarFun Wave Pro ANC Wireless Headphones User Manual

HP200 EarFun Wave Pro ANC Wireless Headphones

Specifications

• Bluetooth Version: 5.0
• Frequency Response: 20Hz – 20kHz
• Driver Size: 40mm
• Impedance: 32Ω
• Battery Capacity: 1000mAh
• Charging Time: 2 hours
• Playtime: Up to 30 hours (ANC off)
• Weight: 270g

Product Usage Instructions

Updating Headphones Firmware
To update your headphones firmware, follow these steps:

1. Make sure your headphones are connected to the EarFun Audio app
2. Open the app and go to the firmware update section
3. If an update is available, follow the on-screen instructions to update your headphones

Playing Music

• Play/Pause: Press once
• Next track: Press and hold for 2 seconds
• Previous track: Press and hold for 2 seconds
• Volume up: Press once
• Volume down: Press once

Noise Cancelling Control

• Noise cancelling / Normal / Ambient sound: Press once

Hands-Free Conversation

• Answer/End a call: Press once
• Reject a call: Press and hold for 2 seconds
• Answer and transfer two calls: Press twice

Activate the Voice Assistant

• Voice assistant: Press once

EarFun Audio App
Download the EarFun Audio app for an enhanced experience. The app provides the following features:

• Equalizer tuning Customizing touch controls
• Firmware updates Headphones battery status
• Less data tracking Personalized device name
• Built-in feedback And more

Downloading the App
To download the EarFun Audio app, follow these steps:

1. Go to the App Store or Google Play Store
2. Search for “EarFun Audio”
3. Download and install the app

Please update your headphones firmware to the latest version via the EarFun Audio App for the best user experience. If headphones can’t connect to the app, reinstall or update the app in the app store.

What’s in the Box

• EarFun Wave Pro ANC Wireless Headphones
• Travel Case
• AUX Audio Cable
• USB-C Cable
• User Manual

Product Diagram

1. MFB Button
2. Volume +/- Button
3. ANC Control Button
4. Headphone Status LED indicator
5. Microphone
6. 3.5mm AUX Audio Input Jack
7. USB-C Charging contactor
8. Charging LED indicator

Pairing Your Headphones

First-time Pairing with Device

1. Press and hold the MFB button for 2 seconds to power on the headphones. It will automatically enter into pairing mode.
2. Activate Bluetooth on your Bluetooth-enabled device and search for other Bluetooth devices.
3. Select “EarFun Wave Pro” from the list of Bluetooth devices shown. If a password is needed, type ‘0000’.

Notes : The headphones will automatically connect with the previously paired device when power on again.

Connect to a New Device

Option A

1. Unpair the headphones from the Bluetooth-enabled device that’s connected. The headphones will disconnect from the current device and go into pairing mode to be paired again.
2. Search on the new device and connect.

Option B

1. Press the MFB button three times quickly in connecting status.The headphones will disconnect from the current device and go intopairing mode.
2. Search on the new device and connect.

Pairing and Connecting two Bluetooth devices simultaneously

1. Pair with the first device and stay connected.
2. Press the MFB button three times quickly. The headphones will enter pairing mode and will disconnect from the first device.
3. Search on the second device to connect the headphones.
4. Manually reconnect the headphones on the first device.

Notes:
The headphones will automatically connect to both devices after finishing setting up the multipoint connection.

Functions

Power On/Off

• Power on : Press and hold the MFB button for 2 seconds
• Power off : Press and hold the MFB button for 5 seconds

Note : If the headphones are not connected to any device, they will automatically power off after 30 minutes to save battery life.

Playing music

Noise cancelling control

Hands free conversation

Activate the voice assistant

Game Mode : Please enable in EarFun Audio app

Headphones Status LED Indicator

**Reset and Reconnecting

**

If you fail to establish a connection between the headphones and Bluetooth devices, please try the following steps:

1. Press and hold MFB button for 5 seconds to power off headphones.
2. Press and hold the MFB button for at least 10s until headphones status LED indicate in pink, and then release the button. The Headphones have been reset successfully.
3. Power on headphones again and then delete the previous connection from the Bluetooth device and reactivate Bluetooth to reconnect “EarFun Wave Pro”.

Charging

1. Please clean the USB-C charging port before charging.
2. Fully charge the headphones before first use.
3. You can check the headphones battery level from the Bluetooth device or EarFun Audio app.

Connect USB-C cable for charging

AUX Input

1. The headphones will power off and disconnect Bluetooth connection when plug-in the AUX audio cable.
2. In AUX input mode, the audio will connect to the transducer directly that can’t control the volume, play/pause by the headphones, and also can’t be controlled by the EarFun Audio app. Please use the front-end device to adjust the volume and play/pause.

Note:
Please ensure that the volume of front-end device is turned down to minimum when connecting the AUX audio. Adjust the volume after putting on this headphones.

Specifications

Customer Service
For FAQS and more information: Please send an email to: service@myearfun.com www.myearfun.com

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

CAUTION
Risk of explosion if the battery is replaced by an incorrect type.

Disposal of a battery into fire or a hot even, or mechanically crushing or cutting of a battery, that can result in an explosion; Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

BLUETOOTH
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Earfun Technology (HK) Limited is under license. LDAC and LDAC logo are trademarks of Sony Corporation. Hi-Res Audio Logo and Hi-Res Audio Wireless Logo is used under license from Japan Audio Society. Other trademarks and trade names are those of their respective owners.

EU Declaration of Conformity
Earfun Technology (HK) Limited hereby declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and RoHS 2011/65/EU Directive. The declaration of conformity may be consulted in the support section of our Web site, accessible from www.myearfun.com

UK Declaration of Conformity
Hereby, [Earfun Technology (HK) Limited] declares that the radio equipment type [HP200] is in compliance with UK Radio Equipment Regulations (SI 2017/1206). The full text of the declaration of conformity is available at the following internet address: www.myearfun.com

ISED Compliance Statements
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

MODEL : HP200
FCC ID : 2AVIT-HP200
HVIN : HP200,
IC: 25936-HP200

Frequently Asked Questions

How long does it take to fully charge the EarFun Wave Pro headphones?

The EarFun Wave Pro headphones take approximately 2 hours to fully charge.

How long is the battery life of the EarFun Wave Pro headphones?

The EarFun Wave Pro headphones can provide up to 30 hours of playtime with ANC off.

Can I connect the EarFun Wave Pro headphones to multiple devices simultaneously?

Yes, you can pair and connect the EarFun Wave Pro headphones with two Bluetooth devices simultaneously using the multipoint connection feature.

The headphones are turning on, but it doesn’t connect to my device?

To connect the headphones to your device, please ensure headphone is power on, then check if the Bluetooth is enabled. If the Headphones still don't connect to your device, please perform a reset or contact our customer support.

Why is the connection not stable and cuts out intermittently?

Please make sure there are no objects between the headphones and your Bluetooth device and make sure there is no radio or WIFI interference nearby.

What is the range of Bluetooth headphones?

Bluetooth headphones have maximum range of 49 feet (15m, no obstacle). However, the actual range will depend on usage and environment.

My headphones will not switch on?

Please recharge them and make sure they have enough battery power. If they are fully charged and still nothing happens or if you are not able to charge them, please contact our customer support.

Will the headphones shut off automatically?

The headphones will stay on as long as they are connected to a device. If no audio is playing, they will enter power-saving mode and wake up once audio playback resumes. If the headphones are not connected to any devices they will automatically power off after 30 minutes.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>