VTech 5640 Turbo Edge Riders Stunt Flight Track Set User Guide
- June 16, 2024
- vtech
Table of Contents
VTech 5640 Turbo Edge Riders Stunt Flight Track Set
Specifications
- Product Name: Turbo Edge Riders Stunt Flight Track Set
- Model Number: 5640
- Recommended Age: 3 years and above
- Assembly Required: Yes
Product Usage Instructions
Initial Assembly:
For your child’s safety, follow these initial assembly steps before
allowing them to play with the toy:
- Stick the rubber label under the stands with the code C-14
- Apply the pop-up stunt stickers to any track pieces as desired
Building the Pop-Up Stunt:
Follow these steps to build the pop-up stunt:
- Connect track pieces with codes P-05 and P-07 using a connector with code C-03
- Attach a paper stand with code P-01 to the connector with code C-07
- Attach another paper stand with code P-04 to the connector with code C-03
Track Assembly – Building the Low U-Turn Track:
Follow these steps to build the low U-turn track:
- Connect track pieces with codes C-02 and C-07 using a connector with code C-01
- Connect track pieces with codes C-07 and C-08 using a connector with code C-09
- Connect track pieces with codes T-02 and T-01 using a connector with code C-12
- Connect track pieces with codes C-12 and C-12 using a connector with code C-12
- Connect track pieces with codes C-12 and C-12 using a connector with code C-12
- Connect track pieces with codes T-02 and C-10 using a connector with code C-12
- Connect track pieces with codes C-10 and C-12 using a connector with code C-11
- Connect track pieces with codes C-06 and C-11 using a connector with code C-06
Track Assembly – Building the High U-Turn Track:
Follow these steps to build the high U-turn track:
- Connect track pieces with codes C-02 and C-04 using a connector with code C-07
- Connect track pieces with codes C-07 and C-01 using a connector with code C-05
- Connect track pieces with codes C-05 and C-08 using a connector with code C-09
- Connect track pieces with codes T-02 and C-12 using a connector with code C-12
- Connect track pieces with codes T-02 and C-12 using a connector with code C-12
- Connect track pieces with codes A1 and C-10 using a connector with code C-12
- Connect track pieces with codes T-02 and C-10 using a connector with code C-11
- Connect track pieces with codes C-06 and C-11 using a connector with code C-06
FAQ’s
- Q: What is the recommended age for this product?
- A: The recommended age for the Turbo Edge Riders Stunt Flight Track Set is 3 years and above.
- Q: Is adult assembly required?
- A: Yes, adult assembly is required for this toy.
- Q: Can I attach the pop-up stunt stickers to any track pieces?
- A: Yes, you can stick the pop-up stunt stickers to any track pieces as cool decorations.
- Q: How can I make the stands stay on the floor firmly?
- A: If necessary, you can add suction cups to one stand to make it stay on the floor firmly.
- Q: How do I start the rush on the track?
- A: Switch the helicopter on and place it carefully on the track to start the rush.
Collect Them All!
Build A Mega Track!
DISCOVER MORE SETS
For USA
www.vtechkids.com/turboedgeriders
For Canada
www.vtechkids.ca/en/turboedgeriders
STUNT FLIGHT TRACK SET
COMPONENTS
Color the Cardboard.
Roll T-01 and T-02 up with a can to make smooth curves.
ASSEMBLY INSTRUCTIONS
With the Turbo Edge RidersTM Stunt Flight Track Set, safety comes first. Adult assembly required. For your child’s safety, do not let them play with this toy until the initial assembly steps are completed.
Stick the rubber label under the stands
INITIAL ASSEMBLY
LABEL APPLICATION
BUILDING THE POP-UP STUNT
USING THE PAPER STANDS
TRACK ASSEMBLY
BUILDING THE LOW U-TURN TRACK
If necessary, add suction cups to one stand to make it stay on the floor firmly.
- Switch the helicopter on and place it carefully on the track to start the rush.
You may build a higher platform too!
BUILDING THE HIGH U-TURN TRACK
Getting Started
-
Gather your DIY tools.
Warning : Adult supervision is required. -
Recycle any spare cardboard with a thickness of approximately 6-8mm to make new tracks.
-
Use the ruler to measure the height.
-
The heights should match!
More Tracks, More Fun
- Design some DIY track.
- Use scrap paper and cotton balls to add some fun!
- Join the tracks with connectors (C-10).
- Use a stand (C-12) to stabilize.
Design Fun Accessories
Don’t forget the stand…
Make a Pop-up UFO
STEAM Think Like an Engineer!
What Engineer : Do?
- Design
- Build
- Fix things
The Engineering Design Process is a way of thinking to solve problems.
Start with a question
Example:
How can I make a paper aeroplane that flies across the room?
Plan & Design
Build
Test
Reflect & Improve
Knowledge Pit Stop 1
- Gravity is the force that pulls objects to the Earth.
- When an object tries to go uphill, it must work harder to go against gravity.
- When an object goes downhill, it works with gravity.
Engineering Challenge
Start with a question
Plan and Design
- Sketch out track pieces with slopes that go uphill and slopes that go downhill.
- Try out slopes with different levels of steepness.
Build
-
Step 1:
Draw your hill designs -
Step 2:
Cut your designs -
Step 3:
Make а сору -
Step 4:
Assemble your track
Test
Reflect
- Is it faster for cars to go uphill or downhill?
- How does the steepness of the slope change the speed?
- Can you adjust the copy to make each hill too steep to climb up?
Knowledge Pit Stop 2
- Momentum is the force of an object in motion. With faster speeds, an object has more momentum.
- A moving object continues moving in the same direction unless another force acts on it.
Engineering Challenge
Start with a question
Plan and Design
- Think about what you learned from Challenge #1 to make the car move at a faster speed.
- Sketch tracks with different levels of slopes and curves.
Build
-
Step 1:
Draw your designs -
Step 2:
Provide a straight track leading up to the U-turn -
Step 3:
Assemble the rest of the track
Test
Reflect
- Which track pieces worked best to complete the U-Turn?
- Did any track pieces not work?
- Why did the best piece work better than other pieces?
Knowledge Pit Stop 3
- The Turbo Edge Rider builds momentum as it moves along the track.
- The faster it goes, the greater the momentum.
- When a Turbo Edge Rider leaves a ramp, gravity will try to pull it down.
- But with enough momentum, the vehicle can get across the gap.
Engineering Challenge
Start with a question
Plan and Design
A Turbo Edge Rider needs to go fast and to be pointed upward before it can make a jump.
Build
-
Step 1:
Draw and cut your designs -
Step 2:
Make а сору. -
Step 3:
Assemble the track and prepare a landing zone with a mat
Test
Reflect
- Can Turbo Edge Rider jump all 3 gaps safely?
- What kind of ramps can a Turbo Edge Rider jump?
Jr. Engineer A CERTIFICATE
- Awarded to:
- Date
- Awarded by
References
- VTech Canada | Official Electronic Learning Toys & Games for Kids
- Best Kids Tech Toys | Electronic Learning Toys | VTech America
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>