Tenda 4G03 Pro 4G LTE Router Installation Guide

Tenda 4G03 Pro 4G LTE Router

Get support and services
https://www.tendacn.com/service/default.html

For technical specifications, user quides and more information, please visit the product page or service page on www.tendacn.com. multiple languages are You can see the product name and model on the product label.

 Set up the router

1. Insert a Nano SIM card into the slot of the router.
2. Use the included power adapter to connect the PWR jack of the router to a power source.
3. All LED indicators light up. Wait a few seconds. The router is connected to the internet when the internet LED indicator ( S) lights solid on.

Tips
If the internet LED indicator ( S) does not light solid on, refer to Q1 in FAQ.

Connect clients to the internet

• Connect your wired device, such as a computer, to the WAN/LAN or LAN port of the router using an Ethernet cable.
• Connect your wireless device, such as a smartphone, to the Wi-Fi network of the router using the Wi-Fi Name and Wi-Fi Key labeled on the bottom panel of the router.
• To further configure the router, such as changing the Wi-Fi name and Wi-Fi key, log in to the web Ul of the router by visiting tendawifi.com on a connected device or download the Tenda WiFi App by scanning the QR code below.

O- Tips
If you cannot log in to the web Ul of the router, refer to Q2 in FAQ.

Tenda WiFi App

FAQs

The internet LED indicator ( S) does not light solid on. What should I do?

Check that your SIM card supports LTE or CDMA.Check that your SIM card is in your ISP's service area.Check that your SIM card balance is sufficient.

I cannot access the web Ul of the router by visiting tendawifi.com. What should I do?

Try the following solutions.Ensure that your wireless device is connected to the Wi-Fi network of the router.Clear the cache of your web browser or try again with another web browser. Ensure that the computer has connected to the router properly.

How to reset the router?

When the device completes startup, press the RST/WPS button for about 8 seconds, and release it when all LED indicators light off and then light up. The router will be reset successfully in about two minutes.

Safety Precautions

Before performing an operation, read the operation instructions and precautions to be taken, and follow them to prevent accidents. The warning and danger items in other documents do not cover all the safety precautions that must be followed. They are only supplementary information, and the installation and maintenance personnel need to understand the basic safety precautions to be taken.

• The device must be horizontally mounted for safe use.
• Do not use the device in a place where wireless devices are not allowed.
• The mains plug is used as the disconnect device, and shall remain readily operable.
• The power socket shall be installed near the device and easily accessible.
• Operating temperature: -5°C-45°C
• Keep the device away from water, fire, high electric field, high magnetic field, and inflammable and explosive items.
• Do not use the power adapter if its plug or cord is damaged.
• Disassembling or modifying the device or its accessories without authorization voids the warranty, and might cause safety hazards.
• For latest safety precautions, see Safety and Regulatory Information on www.tendan.com.

CE Mark Warning
Hereby, SHENZHEN TENDA TECHNOLOGY CO., LTD. declares that the device is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://www.tendacn.com/download/list-9.html

Technical Support
Shenzhen Tenda Technology Co., Ltd.
Floor 6-8, Tower E3, No.1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China. 518052
Website: www.tendacn.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>