ANKER A1645 Nano Power Bank Instruction Manual
- June 12, 2024
- Anker
Table of Contents
ANKER A1645 Nano Power Bank
Product Information
- Product Name: Anker 621 Power Bank (Built-In Lightning Connector, 12W)
- Model: A1645
- Product Number: A1645 51005003851 V01
- Manufacturer: Anker Innovations Limited
- Importer (FCC matters): Fantasia Trading LLC
- Importer (EU and UK matters): Anker Technology (UK) Ltd, Anker Innovations Deutschland GmbH
Important Safety Instructions:
- Store this product in a cool and dry place.
- Do not store this product in a hot or humid environment.
- Use only the recommended power supply or charger.
- Avoid exposing the product to heat or fire.
- Make sure the battery is not discharged completely to prevent fire or smoke.
- Do not modify or make any changes to the product without approval.
Declaration of Conformity:
The product is in compliance with Directives 2014/35/EU, 2014/30/EU &
2011/65/EU. The full text of the EU declaration of conformity is available at
https://www.anker.com. The product is in compliance with Electrical
Equipment (Safety) Regulations 2016 & Electromagnetic Compatibility
Regulations 2016 & The Restriction of the Use of Certain HazardousSubstances
in Electrical and Electronic Equipment Regulations 2012.The full text of the
GB declaration of conformity is available at https://www.anker.com.
Disposal:
This product should not be treated as household waste. Instead, it should be
handed over to the applicable collection point for the recycling of electrical
and electronic equipment.
FCC Statement:
The device complies with Part 15 of the FCC Rules. It may not cause harmful
interference and must accept any interference received, including interference
that may cause undesired operation.
IC Statement:
This digital apparatus complies with CAN ICES-3(B)/NMB-3(B).
Product Usage Instructions
- Store the power bank in a cool and dry place to ensure its longevity.
- Avoid exposing the power bank to extreme temperatures or humid environments.
- Only use the recommended power supply or charger provided by the manufacturer.
- Charge the power bank fully before using it for the first time.
- Connect your device to the power bank using the built-in Lightning connector.
- Press the power button on the power bank to start charging your device.
- Monitor the battery level indicator on the power bank to know when it needs to be recharged.
- To recharge the power bank, connect it to a power source using the provided charging cable.
- Follow all safety instructions mentioned in the user manual to prevent any accidents or damage.
- If you experience any issues or have any questions, visit https://www.anker.com/support for FAQs and more information.
Important Safety Instructions
When using this product, basic precautions should always be followed:
- Store this product in a cool and dry place.
- Do not store this product in a hot or humid environment.
- Using a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or personal injury.
- Operating temperature should be between 32 to 95°F / 0 to 35°C.
- Do not disassemble this product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or personal injury.
- If this product is not used for an extended period, you should charge and discharge it once every three months.
- When charging a device, this product may feel warm. This is a normal operating condition and should not be a cause for concern.
- Under normal operating conditions, the battery performance will decline over several years.
- Do not expose the product to heat or fire.
- Do not clean this product with harmful chemicals or detergents.
- Misuse, dropping, or excessive force may cause product damage.
- When disposing of secondary cells or batteries, keep those of different electrochemical systems separate.
- Beware that a discharged battery may cause fire or smoke.
- CAUTION: There is a risk of explosion if the battery is replaced by an incorrect type.
- WARNING: The batteries (battery pack or installed batteries) shall not be exposed to excessive heat, such as from the sun or fire.
- A battery subjected to extremely low air pressure may result in an explosion or leakage of flammable liquid or gas.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance
with Directives 2014/35/EU, 2014/30/EU & 2011/65/ EU. The full text of the EU
declaration of conformity is available at the following internet address:
https://www.anker.com.
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance
with Electrical Equipment (Safety) Regulations 2016 & Electromagnetic
Compatibility Regulations 2016 & The Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
The full text of the GB declaration of conformity is available at the
following internet address: https://www.anker.com.
Anker Innovations Limited
- Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
- The following importers are the responsible parties (contracts for EU and UK matters):
- Anker Technology (UK) Ltd
- GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
- Anker Innovations Deutschland GmbH
- Georg-Muche-Strasse 3, 80807 Munich, Germany
This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from the connected receiver..
- Consult a dealer or an experienced radio / TV technician for help.
Product Name: Anker 621 Power Bank (Built-In Lightning Connector, 12W)
Model: A1645
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1-800-988-7973
IC Statement
This digital apparatus complies with CAN ICES-3(B)/NMB-3(B).
For FAQs and more information, please visit:
- anker.com/support
- @anker official
- @anker_jp
- @AnkerDeutschlanc
- @AnkerJapan
- @Anker
- @AnkerOfficial
- @Anker_JP