Hoyz Collection 7890 Hanging Lamp Instructions

Table of Contents

Indoor use only
Suitable for fixing to normal flammable surfaces
Not suitable for fixing to flammable surfaces directly
Protection Class 1: Must be grounded with the earth wire connected to the marked clip
Protection Class 2: Double insulated and should not be connected to Earth
Protection Class 3: Suitable for very low voltage supply (e.g., 12V)
Maximum Wattage: Use lamps of the correct type and never exceed the specified maximum wattage
Disposal: Do not dispose of household waste; contact the retail outlet for the proper disposal method

Installation

If you intend to dim the luminaire (without a dimmer), consult an authorized retailer to determine the suitable dimmer type.
The manufacturer is not liable for incorrect dimmer usage.

Mounting

If mounting on a ceiling or junction box, ensure to cover the box with a lid.
If the luminaire does not align directly under the junction box, install a mounting hook at the desired location on your ceiling.
Consult an expert for the correct plug type for secure fastening.

Technical Specifications

Always adhere to all technical specifications provided with the lighting fixture.
Symbols indicating these specifications can be found on the fixture.

Q: Can this luminaire be used outdoors?
A: No, this luminaire is designed for indoor use only.
Q: What should I do if I exceed the maximum wattage?
A: Do not use lamps that exceed the maximum wattage specified for the luminaire as it may cause damage. Use lamps within the recommended wattage range.
Q: How should I dispose of the luminaire?
A: The luminaire should not be disposed of with regular household waste. Please contact your retailer for guidance on proper disposal methods to ensure environmental compliance.

SYMBOLS

Below you will find all explanations with numeric reference to the icons.

This luminaire should only be installed indoors.
This luminaire is suitable for fixing to normal flammable surfaces.
This luminaire is not suitable for fixing flammable surfaces.
Protec on class 1: the luminaire has an earthing cone. The earth wire has to be connected to the clip marked with .
Protec on class 2: the luminaire is double insulated and must not be connected to an Earth.
Protec on class 3: the luminaire is only suitable for very low voltage supply (e.g. 12V.)
Max. … W: only use lamps suitable for this luminaire and keep within the maximum specified w ge.
The luminaire cannot be discharged together with the household refuse.

Please contact your retail outle or the right manner of discharge.

Always isolate the power before commencing installation, repair, or maintenance.
If in doubt about the installation, repair, or maintenance, consult a qualified electrician or contact your retail outlet.
Always tighten the terminal screws firmly, especially the attachment for low voltage wiring (12V) if applicable.
Observe the correct color of the wiring before installation: blue (N), brown or black (L), yellow-green (Earth.)
If the luminaire is mounted on a metal surface, this surface must be bonded to the protective earth conductor or the equipotential bonding conductor of the installation.
If you want to dim the luminaire (if there is no dimming device installed) please be sure you use the right type of dimming device. In doubt always consult a qualified electrician or contact your local retail outlet. The manufacturer cannot be held responsible in case of usage of the wrong type of dimming device.
If the luminaire is mounted onto a ceiling box or wall box, it is obligated to cover the box with a lid first. In case the luminaire is not mounted directly under the ceiling box, be sure to use a solid fixing hook. If in doubt about the fixing hook, or which patch to use, consult a qualified electrician or contact your retail outlet.
Always consider all the technical specifications of the luminaire.