AC INFINITY AC-GBA3 Gear Board User Manual
- June 16, 2024
- AC Infinity
Table of Contents
AC INFINITY AC-GBA3 Gear Board
Product Information
USER MANUAL
Welcome to AC Infinity! Thank you for choosing our product. We are dedicated
to providing high-quality products and excellent customer service. If you have
any questions or suggestions, please feel free to contact us. You can visit
our website at www.acinfinity.com and click on
the “Contact” section for our contact information.
- Email: support@acinfinity.com
- Website: www.acinfinity.com
- Location: Los Angeles, CA
Specifications
- Manual Code: GB2309X1
- Product: Gear Board
- Model: AC-GBA3
- UPC-A: 819137024465
Product Warning
TO REDUCE THE RISK OF INJURY TO PERSONS OR DAMAGE TO PRODUCTS, OBSERVE THE
FOLLOWING:
- Read all instructions before installing and using this product.
- Do not use the gear board to replace a grow tent bar. This is not a replacement and will not support the weight of LED grow lights or heavy ventilation equipment.
Key Features
- Flexible Mounting: Supports your equipment via a variety of mounting methods including magnetic backing, screws, wire ties, or hooks.
- Highly Customizable: Organizes controllers, drivers, tools, and more in any orientation for a workstation panel that fits in grow tents of any size.
- Cord Management: Features wider openings to organize your cords, allowing them to be placed out of sight and kept away from your grow.
- Easy to Adjust: Adjustable poles can extend smoothly up to 5 feet, lock in place securely, and enable quick repositioning.
- Firm-Fitting Design: Metal legs effectively hook into place around your grow tent’s frame to provide a secure grip while leaving duct ports available.
- Built for Grow Tents: Powder-coated steel frame can handle a great amount of weight from growing equipment while withstanding humidity and heat.
Product Contents
- Gear Board (x1)
- Stabilizing Pole (x2)
- Hooked Pole (x2)
- Hook-and-Loop Strap (x2)
- Wire Tie (x20)
Installation
-
Step 1
Insert the hooked poles vertically into the two openings at the bottom of your gear board. -
Step 2
Insert the stabilizing poles horizontally into the two openings at the top of your gear board. -
Step 3
Adjust the poles’ lengths to fit your grow tent. Make sure they click into place to lock in their length. -
Step 4
Secure the hooked poles onto the back of your grow tent’s frame base. -
Step 5
Fasten the stabilizing poles to your grow tent’s frame using the hook-and-loop straps.
Tent Setup
Board Orientation
You may adjust your gear board’s placement to keep your grow tent’s duct ports
unobstructed.
Device Mounting
- Screw Mounting: Screw device bolts into one of the slots located at the centre of your gear aboard. Hang your device by these bolts using the holes on its backside.
- Magnet Mounting: You may also mount your device onto your gear board’s steel surface using the magnet located on the back.
- Cord Management: Route your devices’ cords through the large slot located below the AC Infinity logo so that they run behind your gear board. (Devices sold separately)
Driver Mounting
You may use wire ties to strap your grow light’s driver onto your gear board.
This will shift the heat concentration away from your growth light and your
growth.
Cord Management:
Route your device’s cords through the larger slots so that they run behind
your gear board. You may also use the hook-and-loop straps and/or wire ties to
secure longer cords to your gear board.
FAQ
-
Q: Can I use the gear board as a replacement for a grow tent bar?
A: No, the gear board is not designed to replace a grow tent bar. It cannot support the weight of LED grow lights or heavy ventilation equipment. -
Q: How do I adjust the length of the poles?
A: To adjust the length of the poles, simply extend them smoothly up to 5 feet and make sure they click into place to lock in their length. -
Q: Can I mount devices using screws?
A: Yes, you can mount devices by screwing device bolts into the slots located at the centre of the gear board. Make sure to hang your device using the holes on its backside. -
Q: Can I use wire ties to secure longer cords?
A: Yes, you can use wire ties to secure longer cords to the gear board. Additionally, you can also use hook-and-loop straps for cord management.
WELCOME
Thank you for choosing AC Infinity. We are committed to product quality and
friendly customer service. If you have any questions or suggestions, please
don’t hesitate to contact us. Visit
www.acinfinity.com and click contact for our
contact information.
PRODUCT WARNING
TO REDUCE THE RISK OF INJURY TO PERSONS OR DAMAGE TO PRODUCTS, OBSERVE THE FOLLOWING:
- Read all instructions before installing and using this product.
- Do not use the gear board to replace a grow tent bar. This is not a replacement and will not support the weight of LED grow lights or heavy ventilation equipment.
KEY FEATURES
-
FLEXIBLE MOUNTING
Supports your equipment via a variety of mounting methods including magnetic backing, screws, wire ties, or hooks. -
HIGHLY CUSTOMIZABLE
Organizes controllers, drivers, tools, and more in any orientation for a workstation panel that fits in grow tents of any size. -
CORD MANAGEMENT
Features wider openings to organize your cords, allowing them to be placed out of sight and kept away from your grow. -
EASY TO ADJUST
Adjustable poles can extend smoothly up to 5 feet, lock in place securely, and enable quick repositioning. -
FIRM-FITTING DESIGN
Metal legs effectively hook into place around your grow tent’s frame to provide a secure grip while leaving duct ports available. -
BUILT FOR GROW TENTS
Powder-coated steel frame can handle a great amount of weight from growing equipment while withstanding humidity and heat.
PRODUCT CONTENTS
INSTALLATION
-
STEP 1
Insert the hooked poles vertically into the two openings at the bottom of your gear board. -
STEP 2
Insert the stabilizing poles horizontally into the two openings at the top of your gear board. -
STEP 3
Adjust the poles’ lengths to fit your grow tent. Make sure they click into place to lock in their length. -
STEP 4
Secure the hooked poles onto the back of your grow tent’s frame base. -
STEP 5
Fasten the stabilizing poles to your grow tent’s frame using the hook-and-loop straps.
TENT SETUP
BOARD ORIENTATION
ORIENTATION
You may adjust your gear board’s placement to keep your grow tent’s duct ports
unobstructed.
DEVICE MOUNTING
-
SCREW MOUNTING
- Screw device bolts into one of the slots located at the centre of your gear aboard.
- Hang your device by these bolts using the holes on its backside.
-
MAGNET MOUNTING
You may also mount your device onto your gear board’s steel surface using the magnet located on the back. -
CORD MANAGEMENT
Route your devices’ cords through the large slot located below the AC Infinity logo so that they run behind your gear board.- Devices sold separately
- Devices sold separately
-
DRIVER MOUNTING
- You may use wire ties to strap your grow light’s driver onto your gear board.
- This will shift the heat concentration away from your grow light and your growth.
-
CORD MANAGEMENT
- Route your device’s cords through the larger slots so that they run behind your gear board.
- You may also use the hook-and-loop straps and/or wire ties to secure longer cords to your gear board.
AC INFINITY PRODUCTS
-
Grow Tent Mounting Bars
A set of accessory bars designed to provide additional support for growing equipment while maximizing tent space. These highly durable steel bars can be arranged to form multiple support systems and include heavy-duty clamps to double their potential weight capacity. -
Circulator Clip Fans
The CLOUDRAY series is a line of clip fans designed to provide precise air circulation for all stages of a plant’s growth cycle. Features digital controls to achieve ten-speed levels, as well as a heavy-duty clamp constructed to tightly grip onto grow tent poles of all sizes. -
Grow Light Bars
The IONBEAM series is a line of grow light bars designed to maximize plant growth by accelerating your plant’s photosynthesis. Features the latest LED technology to efficiently produce full-spectrum and targeted lighting, as well as magnetic mounting to use as inter-canopy lighting. Includes a digital controller with programming modes to schedule and activate ten intensity levels.
WARRANTY
This warranty program is our commitment to you, the product sold by AC Infinity will be free from defects in manufacturing for two years from the date of purchase. If a product is found to have a defect in material or workmanship, we will take the appropriate actions defined in this warranty to resolve any issues.
The warranty program applies to any order, purchase, receipt, or use of any products sold by AC Infinity or our authorized dealerships. The program covers products that have become defective, malfunctioned, or expressively if the product becomes unusable. The warranty program goes into effect on the date of purchase. The program will expire two years from the date of purchase. If your product becomes defective during that period, AC Infinity will replace your product with a new one or issue you a full refund.
The warranty program does not cover abuse or misuse. This includes physical damage, submersion of the product in water, incorrect Installation such as wrong voltage input, and misuse for any reason other than intended purposes. AC Infinity is not responsible for consequential loss or incidental damages of any nature caused by the product. We will not warrant damage from normal wear such as scratches and dings.
Contact our dealers department at dealers@acinfinity.com or 626-838-4656 for more information about our dealers and distributors program. Contact our customer service department at support@acinfinity.com or 626-923-6399 for product and warranty assistance. Our business hours are Monday through Friday, 9:00 am to 5:00 pm PST.
If you have any issues with this product, contact us and we’ll happily resolve your problem or issue a full refund!
COPYRIGHT © 2023 AC INFINITY INC. ALL RIGHTS RESERVED
No part of the materials including graphics or logos available in this booklet
may be copied, photocopied, reproduced, translated or reduced to any
electronic medium or machine-readable form, in whole or in part, without
specific permission from AC Infinity Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>