HEYPOWER P094 Bone Conduction Speaker User Manual

HEYPOWER P094 Bone Conduction Speaker

Specifications

• Model: [Product Model]
• Manufacturer: [Manufacturer Name]
• Compliance: FCC Part 15
• Radiation Exposure Limits: FCC compliant for uncontrolled environment

Safety Precautions
Before using the product, please read and understand the following safety precautions:

1. Do not make any changes or modifications to the device that are not explicitly approved by the manufacturer. Doing so may void your authority to operate the equipment.
2. Ensure that the device is operated within a controlled environment to prevent harmful interference.
3. Maintain a minimum distance of 0cm between the radiator and your body during installation and operation.

Installation

To install the device, please follow these steps:

1. Select an appropriate location for installation, considering factors such as stability, accessibility, and ventilation.
2. Ensure that the device is placed at least 0cm away from your body to comply with FCC radiation exposure limits.
3. Connect the necessary cables and power source to the device.
4. Verify that all connections are secure and properly fitted.

Operation

To operate the device, please follow these instructions:

1. Ensure that the device is properly installed and connected to a power source.
2. Familiarize yourself with the device’s control panel and user interface.
3. Refer to the user manual for specific instructions on how to use the device’s features and functions.
4. Follow any additional guidelines or recommendations provided by the manufacturer.

Maintenance

To maintain the device’s performance and prolong its lifespan, please adhere to the following maintenance recommendations:

1. Regularly clean the device using a soft cloth and mild cleaning solution.
2. Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
3. Keep the device away from liquids, dust, and other foreign objects.
4. Periodically check cables and connections for any signs of damage or wear.

Buttons

1. Lanyard hole
2. Function button
3. Mic slot
4. LED Indicator
5. Charging port (Type C)
6. Power/Mode button
7. Suction cup / adhesive sticker to fix

Single Speaker Operation

1. Long-press the power key until you hear the voice indicate “Power on.”
2. Turn on your phone’s Bluetooth and search for “#35266 Speaker” to pair.
3. Once connected, place the speaker on the surface of any hollow object play.
4. You will get different sound effects from different hollow objects.

Double Speaker Stereo (TWS) Operation
If you have 2 speakers, they can be paired together. Turn both speakers on at the same time and wait for 3-5 seconds, the speakers will pair to each other automatically. (One of the two speakers must be paired to Bluetooth)

FM Function

1. Short-press the Power button to switch from Bluetooth mode to FM mode.
2. Long-press the Function button to search FM channels automatically.
3. After searching is finished, short press the “Function” button to switch to the radio station.
4. FM Volume control: Single click the “Function” button to go down, double click to go up, and triple click the switch to get to the next stored station.
5. (Suggested to use FM function outdoors, plug in USB cable as well to amplify the FM signal)

Charging
The charging cable can be used with a regular USB 5V charger. It is not compatible a fast charger. Especially with 9V 12V and other chargers whose output voltage is higher than 5V.

LED indicator
When charging, the red LED will be lit. Once charged, the red LED will be off. When the Bluetooth mode is turned on, the LED blue light will blink. Once paired, the blue light will be always on.

Tips
Before starting, Peel off the protection film of the stick pad, which on the bottom of the speaker, then place the speaker onto the surface of any hollow subjects.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>