SMART HOME Data Cable Termination Kit User Manual
- June 16, 2024
- Smart Home
Table of Contents
SMART HOME Data Cable Termination Kit
Step-by-Step Guide
- Prepare the Cable:
- Remove 2.5 – 3.8 cm of jacket from the cable end.
- For CAT6 Cables:
- Remove the center spline from the cable.
- Organize Cable Pairs:
- Untwist the pairs up to the jacket base and align them in order.
- Trim the ends flat to ensure an even connection.
- Insert Cable into Connector:
- Slide the cable into the connector until it is fully seated.
- Verify the wiring order is correct.
- Termination Process:
- Place the assembly into the FT-45™ tool.
- Squeeze the tool’s handle closed to secure the connector.
Specifications
| Contact Information | Compliance |
|---|
IDEAL INDUSTRIES EMEA
Unit 3, Europa Court, Europa Boulevard,
Westbrook, Warrington, WA5 7TN, UK.
Tel: +44 (0)1925 44 44 46,
Email: eur.sales@idealindustries.com,
Web: www.idealind.comIDEAL Industries Germany GmbH
Esslinger Strasse 7, D-70771 Leinfelden-Echterdingen, Germany|
- RoHS Compliant
- ISO 9001: Quality Management System
FAQ
- How do I ensure the cable is fully seated in the connector?
- Slide the cable into the connector until it stops moving. Check that the cable jacket is snug against the connector.
- What should I do if the connector doesn’t close properly?
- Verify that the cable ends are trimmed evenly and that no wires are obstructing the connector. Realign the cable if necessary and try again.
- Is this termination kit suitable for both CAT5 and CAT6 cables?
- The instructions provided are specifically for CAT6 cables, which include an additional step of removing the center spline. For CAT5 cables, follow the same steps without removing a center spline.
Installation Instruction
- Remove 2.5 – 3.8 cm of jacket.
- Remove the centre spline (CAT6).
- Untwist pairs to jacket base, and align in order. Trim ends flat.
- Slide cable into connector until fully seated. Verify wiring order.
- Place assembly into FT-45″ tool. Squeeze handle closed.
IDEAL INDUSTRIES EMEA
Unit 3, Europa Court, Europa Boulevard, Westbrook. Warrington, WA5 7TN. UK.
- Tel: +44 (0)1925 44 44 46,
- Email: eur.sales@idealindustries.com.
- www.idealind.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>