TIGERKING PFSD66 Fireproof Safe Box for Home User Manual
- June 15, 2024
- TIGERKING
Table of Contents
TIGERKING PFSD66 Fireproof Safe Box for Home
SAFTEY INFORMATION
WARNING
PLEASE DO NOT MOVE THE SAFE WHILE THE DOOR IS OPEN.
PLEASE DO CLOSE THE DOOR BEFORE MOVING THE SAFE.
Tiger king safe recommends that you do not store loaded guns in this unit.
If you experience any problems or challenges with your safe, please feel free
to contact us for quick response. Many issues can be resolved promptly without
the product needing to be returned. Our customer support team is always
available to answer any questions and help to resolve all concerns you may
have.
STRUCTURE
NOTICE:
Different modes have different numbers of shelf .
FIRST OPENING
STEP 1: Locate the 2 emergency keys (the black key) in the same bag as
the instruction booklet.
STEP 2: Locate the emergency key hole by pushing the left side of the
emergency lock cover;
STEP 3: Align the emergency key with the key hole and fully insert, turn
the key counterclockwise to the limit, and hold on it.
STEP 4: At the same time, rotate the knob clockwise to open the
safe
NOTICE:
- When you rotate the knob clockwise, you must have the key fully inserted and turned counterclockwise to the limit, keeping the key until the safe unlocked and opened.
- Please keep the keys in a secure place, do not lock the keys inside the safe.
INSTALL BATTERIES
STEP 1: After first opening, keep the safe open and locate the battery
compartment on the hinge.
STEP 2: Prepare 4 brand-new AA batteries (not included) and insert into
the battery compartment by matching the + & – electrode;
NOTICE:
- Please use brand-new batteries , do not mix used batteries with new batteries;
- Replace the batteries when the red indicate light turns on, it means the batteries are running out of power.
SET UP THE CODE
- The default code is “159”.The safe can be set with two codes.
SET UP FIRST CODE
STEP 1: Open the safe, keep the safe opening;
STEP 2: Press the reset button (a red button in the hinge side of the
door), the safe beeps twice, meanwhile blue indicate light flashes twice then
keep lighting.
STEP 3: Input a new code, 3-8 digits and press # , the new code will be
confirmed by two “beep” and the blue indicate light will flash twice then turn
off.
STEP 4: Testing the code before you close the door.
SET UP SECOND CODE
STEP 1: Open the safe, keep the safe opening;
STEP 2: Press “0” twice and then press the reset button (a red button in
the hinge side of the door), the safe beeps three times, meanwhile blue
indicate light flashes three times then keep lighting.
STEP 3: Input a new code, 3-8 digits and press # , the new code will be
confirmed by two “beep” and the blue indicate light will flash twice then turn
off.
STEP 4: Testing the code before you close the door.
NOTICE:
- 10 seconds without any operation after pressing the reset button, it will go back to standby mode, you need to retry from “STEP1”;
- Please set up both of two codes immediately after receiving the safe
OPEN THE DOOR
-
THIS SAFE CAN BE UNLOCKED IN BELOW TWO WAYS: FIRST WAY:
Open the safe with key.
Please refer to the step “FIRST OPENING” -
SECOND WAY:
Open the safe with code.
STEP 1: Enter your owner code , each pressing results one buzzer “beep”
and the blue light flash;=
STEP 2: Press # button as confirmed, if the code is correct, the blue
light will flash twice and buzzer “beep” twice, then the green light will turn
on 6S, meanwhile the inner LED light will turn on 30s; if the code is
incorrect, the blue light will flash three times and safe beeps three times.
STEP 3: Turn the knob clockwise to open the safe after you entered the
correct code and while green light turns on.
NOTICE:
1.When press wrong digit, please press “*” to remove all digits inputted then
re-input code.
2. The inner LED light will only turn on when you use the second way to open
the safe;
3. The default code is “159#”.
CLOSE THE SAFE
Close the door and rotate the knob counterclockwise.
DUAL ALARM SYSTEM
- Continuously inputting wrong code three times, the safe will automatically lock about 20 seconds and the buzzer will go off, any action at keypad is invalid.
- Continuously wrongly input for three times after the first alarm, the safe will automatically lock around 5 minutes and the alarm will go off for the second time, any action at keypad is invalid during that time.
- The beeps can be stopped by:
step 1: Use the key to open the safe;
step 2: Remove the battery to cut off the power.
SILENCE MODE
Sound Off
Press “00” and then press” * ” as confirming, the sound will turn off, no
“beep” during operation.
Sound On
Press”66″ and then press” * ” as confirming, the sound will turn on, the
beep and sound will be restored.
NOTICE:
After power-cut, the sound will turn on.
CUSTOMER SUPPORT & WARRANTY
Where could I find the instruction video?
To see the tutorial video:
-
Go to our Facebook: @TIGERKINGSAFES
-
Go to our Youtube channel：
https://www.youtube.com/@tigerkingsafe -
contact us to get the videos (24/7):
Messenger: m.me/TIGERKINGSAFES
Email : [email protected]
go to our web www.tigerkingsafe-us.com click chat with us to have live conversation
What should I do if losing the keys?
If lost emergency key —
The numbers on the emergency key or the number in the emergency key hole.
Customer Support /Warranty
The possible problem you might meet:
- Cargo damaged
- Missing accessories
- Unsatisfied with the safe
- Or any other setting problem
We encourage you to contact us (24/7):
Messenger: m.me/TIGERKINGSAFES
Email : [email protected]
We offer 1 Year Warranty for our client and we shall find solution for you.
For details, please refer to our warranty card or contact us at “
[email protected]”.
Thank you for your time to read
FIREPROOF SAFE SERIES
CUSTOMER SUPPORT
Email:[email protected]
Facebook:@TIGERKINGSAFES
Messenger:m.me/TIGERKINGSAFES
go to our webwww.tigerkingsafe-us.com click chat with us to have live conversation