CRAFTMAN 561036 Pendant Lamp Instruction Manual
- June 17, 2024
- CRAFTMAN
Table of Contents
CRAFTMAN 561036 Pendant Lamp
Product Information
Specifications
- Item Number: 561036
- Product Type: Pendant Lamp
- Manufacturer: Craftman
- Revision Date: 09-23
Product Usage Instructions
Assembling Instructions
ATTENTION:
We recommend using the special screws provided when installing the pendant
lamp.
Adjusting Cable Length
- If you need to reduce the height of the lamp, cut the cables carefully.
- Keep the set of 3 capacitors in their original position.
- Adjust the length of the cables without the glass shade before installation.
Straightening Twisted Cables
If the cable is twisted, hold the bottom and use a screwdriver or metal rod to
stroke the cable up and down to straighten it.
Installing Glass Shade
- Insert the glass shade through the tube.
- Place the silicone ring in the marked position.
- Adjust the ring to level the shade.
Note:
Craftsman production may have small imperfections that are checked by our
quality control.
FAQ
-
Q: Can I use my screws instead of the special screws provided?
A: It is recommended to use the included special screws to ensure proper installation and safety. -
Q: How do I adjust the height of the lamp?
A: Carefully cut the cables as needed, keeping the set of 3 capacitors in their original position, and adjust the cable length before installing. -
Q: What should I do if the cable is twisted?
A: Hold the bottom of the cable and use a screwdriver or metal rod to stroke the cable up and down to straighten it before installation.
ASSEMBLING INSTRUCTIONS
ATTENTION:
We recommend to use included special screws when installing this pendant lamp.
IMPORTANT NOTICE
Adjust the length of the cables without glass shade before installing.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>