eonon E20 7 Inch Portable Car Stereo User Manual
- June 14, 2024
- Eonon
Table of Contents
E20 7 Inch Portable Car Stereo User Manual
Precautions
- This product is only suitable for vehicles with DC12-24V power system. Do not install it on vehicles whose power supply is not DC12-24V, o it may damage the product or cause a fire due to overvoltage.
- Do not allow this product to come into contact with liquids. Otherwise it may result in product damage.
- Please turn off the car and disconnect the positive battery terminal before installation to prevent product damage caused by short circuits.
- Please do not use the car audio after the engine is turned off for a long time, or it will drain the battery power.
- If this product is exposed to water damage or foreign matter is discovered in the product while you’re driving, please park your vehicle in a safe place, turn off the ignition switch(ACC OFF) immediately and consult your dealer or Eonon customer service. Do not use this product in this condition because doing so may result in a fire, electric shock, or other failure.
- If smoke, strange noises or unusual odors occur during normal use, or any other abnormal signs appear on the LCD screen, please tur off the power immediately and consult your dealer or Eonon customer service. Do not use this product in this condition because doing so may result in afire, electric shock, or other failure.
- For interior inspection, adjustment or maintenance, please consult your dealer or Eonon customer service
- Please use this product in accordance with traffic laws.
- Keep this manual handy as a reference for operating procedures and safety information.
- We reserve the right of final explanation.
Product Appearance 
- MIC
- Volume-
- Home
- Volume+
- Power Supply Input
- MicroSD Card Slot
- USB Port
- Video Input for Backup Camera
- AUX Output
- Built-in Speaker
Wiring Diagram
- Cigarette Lighter Power Cable
- Backup Camera Video Input Cable
- Backup Camera Control Wire
- AUX Adapter Cable
Accessories
Installation Method
To install the unit to the windshield: 
To install the ulon the center console:
To install the sunshade cover:
Align the buckles of sunshade cover with the holes on the panel and insert it.
Home Screen
-
Tap to turn on CarPlay.
-
Tap to turn on Android Auto.
-
Tap to access Bluetooth phone call.
-
To broadcast the audio files on the unit to other radio equipment (like car radio) via FM transmit.
-
Tap to go to the setup menu.
-
Tap to go to the home screen.
-
Display the connection status of Bluetooth
-
Tap to ajust the display brightness and switch between day/night mode.
Tap and hold to turn the screen off. -
Tap to adjust the volume.
-
Tap to go back to the previous page.
-
Tap to turn on AirPlay.
-
Tap to access screen mirroring.
-
Tap to view the files from the USB.
-
Tap to view the files from the SD card.
-
Tap to access Bluetooth music.
-
Tap to access EQ settings.
-
Tap to change the wallpaper.
Bluetooth Phone Call/Music
Note: This product only supports calls via Bluetooth and Bluetooth music
by connecting the Bluetooth on your phone.
Connecting to other Bluetooth devices is not supported.
CAUTION: For your safety, please avoid talking on the phone as much as
possible while driving.
Connection method:
Search for the device of the car stereo (Name: Eonon) through Bluetooth on
your phone to connect it.
(It will generate a random password.)
Note:
- The operation of different mobile phone types may differ. For detailed instructions, please refer to the user manual of your phone.
- It is not guaranteed that all mobile phones with Bluetooth wireless technology can be connected.
- The distance between this product and your phone must be less than 5 meters when using Bluetooth.
- If your phone supports wireless Android Auto/CarPlay, and it is set correspondingly in the “Smart phone” setting, the unit will
automatically access Android Auto/CarPlay after connecting to Bluetooth, but the Bluetooth will not be available at this time.
If you want to use Bluetooth, you need to turn off Android Auto/CarPlay on the phone or go to the “Smart phone” setting to set the [Wireless connection mode] as [Autolink].
- Calling interface
- Bluetooth phonebook
- Call history
- Bluetooth setting
- Call date and time
- Dialed calls
- Received calls
- Missed calls
- End a call
- Mute or unmute the microphone
- Numeric keypad
- Answer calls via car stereo /mobile phone
- Currently connected Bluetooth device
- Auto-answer calls on/off
- Autoload phonebook on/off (Please make sure Bluetooth contact sharing is enabled on your phone.)
- Bluetooth settings
- To load the phonebook (Please make sure Bluetooth contact sharing is enabled on your phone)
- To delete the phonebook
- Previous
- Play/Pause
- Next
- EQ settings
- Currently playing track
Note:
- Resume playback is not supported as the music that Bluetooth device plays is not from the head unit.
- Please avoid using your phone as much as possible when you’re playing music via Bluetooth
- The music will stop playing during a Bluetooth call
USB/SD
Music Playback
Support audio formats like MP3, WMA, WAV, OGG, FLAC, etc.
- View playlist
- Enter a number of a song to play it
- Previous
- Play/Pause
- Next
- Switch among loop single/ loop all/loop playlist/shuffle loop
- EQ settings
Video Playback
Support video formats like AVI, MKV, RMVB, MPG, etc. Formats inlucuding MP41,
MP42, MP43 are not supprted. 
- View playlist
- Enter a number of a video to play it
- Previous
- Play/Pause
- Next
- Switch among loop single/ loop all/loop playlist/shuffle loop
- EQ settings
Picture
Support formats including JPG/BMP/PNG. 
- Restore the picture
- Zoom in the picture
- Previous
- Play/Pause
- Next
- Zoom out the picture
- Rotate the picture
Connections
-
Android Auto
Wired Android Auto setup steps:
1. Go to the Play Store and download the Android Auto App on your phone (as shown below). 2. Go to “Settings–>Smart phone–> Android Device” and select “Android Auto” on the car stereo.
3. Connect the USB cable of your
phone to the USB port of the unit.
Note:
Please make sure that your phone supports Google services and Android Auto.
Wireless Android Auto setup steps:
1. Go to the Play Store and download the Android Auto App on your phone (as shown below). 2. Go to “Settings–>Smart phone–>Wireless connection mode” and select “CarPlay/Airplay and Android Auto” on the car stereo.
3. Turn on WiFi and Bluetooth of your iPhone.
4. Find Bluetooth of the head unit (Bluetooth name: Eonon) on your phone and connect to it.
5. You can access Android Auto after connecting to Bluetooth successfully.
Note:
Please make sure that your phone supports Google services and wireless Android Auto. -
CarPlay
Wired CarPlay setup steps:
1. Go to “Settings–>Smart phone–>Apple Device” and select “CarPlay” on the car stereo.
2. Connect the USB cable of your iPhone to the
USB port of the head unit.
Wireless CarPlay setup steps:
1. Go to “Settings–>Smart phone–>Wireless connection mode” and select “CarPlay/AirPlay and Android Auto” on the car stereo.
2. Turn on WiFi and Bluetooth of your iPhone.
3. Find Bluetooth of the head unit (Bluetooth name: Eonon) on your phone and connect to it.
4. You can access CarPlay after connecting to Bluetooth successfully. -
Screen Mirroring
Setup steps of wired Autolink for Android:
1. Go to “Settings–>Smart phone–> Android Device” and select “Autolink” on the car stereo.
2. Go to the Google Play and install the Autolink
Pro app on your phone. 3. Connect the USB cable of your phone to the USB port
of the head unit, and tap on your phone to grant permission of Autolink Pro
app.
Note:
Please make sure to install the Autolink Pro app on your phone, or screen mirroring will not be available.
Setup steps of wireless Autolink for Android:
1. Go to “Settings–>Smart phone–> Wireless connection mode” and select “Autolink” on the car stereo.
2. Go to the Google Play and
install the Autolink Pro app on your phone. 3.Turn on the Autolink Pro app and
search for the device (Name: Eonon) to connect it.
Note:
Please make sure to install the Autolink Pro app on your phone, or screen mirroring will not be available.
Setup steps of wired Autolink for iPhone:
1. Go to “Settings–>Smart phone–> Apple device” and select “iOSMirror” on the car stereo.
2. Connect the USB cable of your phone to the
USB port of the head unit, and tap on your phone to grant permission of
Autolink Pro. -
AirPlay
This app is only applicable to iPhone AirPlay.
Setup steps:
1. Go to “Settings–>Smart phone–>Wireless connection mode” and select “CarPlay/Airplay and Android Auto” on the car stereo.
2. Turn on WiFi and Bluetooth of your iPhone.
3. Find WiFi of the head unit (Name: Eonon; password: 88888888) and connect to it.
4. Select ‘Eonon-Airplay’ in AirPlay of iPhone.
FM Transmit
This function is to broadcast the audio files on the unit to your car radio
via FM transmit.
Setup Steps:
- Turn on FM transmit and select the frequency.
- Turn on the FM radio of your car radio and tune into the same frequency.
Quick reference:
- Turn on/off FM transmit.
- Tap to select and transmit the frequency; tap and hold for 2 seconds to store the current frequency channel in the corresponding position.
- Current frequency. Frequency range is 76-108MHz
- Tap to lower the frequency by 0.1MHz. Tap and hold for 2 seconds to continuously lower the frequency. Tap again to stop.
- Tap to increase the frequency by 0.1MHz. Tap and hold for 2 seconds to continuously increase the frequency. Tap again to stop.
Settings
-
General setting
Language: To change the language
System verson: To view the system version
SDK version: To view the SDK version
GPL version: To view the GPL version -
Smart phone
To set the functions connected through the phone. -
WiFi
To view the WiFi name and password. -
Bluetooth
To access Bluetooth settings and view the Bluetooth name and paired phone devices. -
Display
To change the parameters of the display. -
Sound effect
Audio settings. -
Reversing setting
To set up the reverse camera guidelines, rear camera mirror and mute function.
Specifications
| Operating Voltage | DC12V-24V |
|---|---|
| Maximum Operating Current | ≤ 1A |
| Operating Temp | -20C+60C |
| Storage Temp | -30C+70C |
| Operating Humidity | 45% – 80%(Relative humidity) |
| Storage Humidity | 39% – 80%(Relative humidity) |
FAQ
as [Autolink]. ” image-1=”” headline-2=”p” question-2=”Android Auto is not working ” answer-2=”1. Please make sure that your phone supports Google services and Android Auto. Please note that some mobile phones don’t support Android Auto, and some mobile phones only support wired Android Auto but not wireless Android Auto. 2. If your phone supports Android Auto, please install Android Auto app from the Play store before using it. 3. To use wired Android Auto, please use the original data cable of your phone and connect it to the USB port of the head unit. 4. To use wireless Android Auto, please turn on WiFi and Bluetooth of your iPhone and connect your phone’s Bluetooth to the head unit’s Bluetooth. Please note that you only need to connect Bluetooth; you don’t need to connect WiFi. ” image-2=”” headline-3=”p” question-3=”CarPlay is not working” answer-3=”1. To use wired CarPlay, please use the original data cable and connect it to the USB port of the head unit. 2.To use wireless CarPlay, please turn on WiFi and Bluetooth of your iPhone and connect your phone’s Bluetooth to the head unit’s Bluetooth. Please note that you only need to connect Bluetooth; you don’t need to connect WiFi. ” image-3=”” count=”4″ html=”true” css_class=””]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>