CUBE ACID CRANK MTB Bike Set User Manual

CUBE ACID CRANK MTB Bike Set

Product Information

Specifications

• Model : Crank MTB
• Manufacturer : Pending System GmbH & Co. KG
• Address : D-95679 Waldershof
• Contact: +49 (0)9231 97 007 80
• Website: www.cube.eu

General
This manual provides important information on the assembly, initial operation, and maintenance of the Crank MTB product. It is essential to read and keep this manual, along with any other accompanying instructions, for future reference.

Product Usage Instructions

• Assembly
  

  • Before assembling or using the product, carefully read all enclosed instructions, especially the general safety instructions. Failure to observe these instructions may result in serious injury or damage to the product and your vehicle.
  • It is highly recommended to have the product assembled by your dealer to ensure proper installation.

• Operation
  When using accessories with the product, it is important to note that they can significantly influence the characteristics of your vehicle. Please read and follow the safety instructions provided for accessories.

• Maintenance
  To prevent malfunctions due to excessive wear, material fatigue, or loose screw connections, regularly inspect the product. If you notice any excessive wear, loose screw connections, deformation, cracks, or color changes, contact your dealer for maintenance.

• Additional Information
  The enclosed instructions are subject to European legislation. If the product or vehicle is delivered outside Europe, the manufacturer/importer may provide additional instructions.

FAQ

1. How should I clean and maintain the product?
   To clean the product, follow the cleaning and maintenance instructions provided in the manual. Regularly inspect and maintain the product to ensure its optimal performance and longevity.

2. How should I store the product when not in use?
   When not in use, store the product in a dry and secure place to protect it from damage. Follow the storage instructions provided in the manual.

3. How should I dispose of the packaging?
   Dispose of the packaging materials properly by separating them according to their material type. Cardboard and paper should be placed in the recycling bin, while films and plastic parts should be disposed of in the appropriate recycling collection.

4. What should I do if I have a complaint or need warranty service?
   In case of a complaint or warranty service, it is important to present the purchase receipt and inspection records for smooth processing. Contact your dealer for further assistance.

GENERAL
READ AND KEEP THE MANUAL

This and other accompanying instructions contain important information on the assembly, initial operation, and maintenance of the product.

• Read all enclosed instructions carefully before assembling or using the product, especially the general safety instructions. Non-observance of this manual may result in serious injury or damage to the product itself and your vehicle. Keep the enclosed instructions close to hand for further use. If you pass on the product or the vehicle equipped with the product to a third party, always include all accompanying instructions.
• We at CUBE strongly recommend that you have this product assembled by your dealer.
• The enclosed instructions are subject to European legislation. If the product or vehicle is delivered out-side Europe, the manufacturer/importer may have to provide additional instructions.

EXPLANATION OF SYMBOLS
The following symbols and signal words are used in the enclosed instructions, on the product or on the packaging.

• WARNING!
  A medium risk of hazard which may result in death or serious injury if not avoided.

• CAUTION!
  A low risk of hazard which may result in moderate or minor injury if not avoided.

• NOTICE!
  Warning of possible damage to property.

  • Useful additional information for assembly or operation.
  • Read and observe the enclosed instructions.
  • Reference to further documentation – See instructions (Doc. – Number)
  • Use a torque wrench. Use the torque values indicated in the symbol.
  • Drill a hole at the marked position. Use the drill diameter indicated in the symbol.
  • Observe indication sound.
  • Trim with suitable tool.

SAFETY INSTRUCTIONS FOR ACCESSORIES

WARNING!

• Risk of accident and injury!
• Read all safety notes and instructions. Failure to observe the safety instructions and instructions can cause accidents, serious injury and damage.
• Safety instructions for assembly
  • Before assembly, check the scope of delivery of the product for completeness.
  • Before assembly, check all components of the product and the vehicle for damage, sharp edges or burrs.
  • If the scope of delivery for the product is not complete or if you notice any damage, sharp edges or burrs on the product, components or vehicle, do not use it.
  • Have the product and the vehicle checked by your dealer.
  • Use only parts and accessories intended for the product. Components from other manufacturers may affect optimal function.
  • If you intend to combine this product with vehicles of other manufacturers, be sure to check their specifications and check dimensional accuracy and compatibility according to the instructions in the enclosed manuals and the owner‘s manual of your vehicle.
  • Screw connections must be tightened correctly with a torque wrench and with correct torque values.
  • If you are not experienced in using a torque wrench or do not have a suitable torque wrench, have loose screw connections checked by your dealer.
  • Note special torques for components made of aluminum or carbon fiber reinforced polymer. Please also read and follow the operating instructions of your vehicle.

Safety Instructions for Operation
Please note that accessories can have a significant in-fluence on the characteristics of the vehicle.

• If you are not absolutely sure or if you have questions, please contact your dealer.
• The enclosed instructions cannot cover every possible combination of the product with all vehicle models.

Safety instructions for maintenance

• Prevent malfunctions due to excessive wear, material fatigue or loose screw connections:

  • Check the product and your vehicle regularly.

  • Do not use the product and your vehicle if you notice excessive wear or loose screw connections.

  • Do not use the vehicle if you notice cracks, deformation or color changes.

  • Have the vehicle inspected immediately by your dealer if you notice excessive wear, loose screw connections, deformation, cracks or color changes

CLEANING AND CARE

NOTICE!
Risk of damage!
Improper handling of cleaning agents can cause damage to the product.

• Do not use aggressive cleaning agents, brushes with metal or nylon bristles or sharp or metallic cleaning objects such as knives, hard spatulas and the like. These can damage the surfaces and the product.
• Clean the product regularly with water (add a mild detergent if necessary) and a soft cloth.

STORAGE

All parts must be completely dry before storage.

• Always store the product in a dry place.
•  Protect the product from direct sunlight.

DISPOSAL

Dispose of the packaging according to its type. Add cardboard and cartons to your waste paper collection, and films and plastic parts to your recyclables collection. Dispose of the product in accordance with the laws and regulations valid in your country.
LIABILITY FOR MATERIAL DEFECTS

• If there are any defects, please contact the dealer from whom you purchased the product.
• In order to ensure that your complaint is processed smoothly, it is necessary for you to present proof of purchase and proof of inspection.
• Please keep them in a safe place.
• To ensure a long service life and durability of your product or your vehicle, you may only use it in accordance with its intended purpose. It is essential that you observe the information in the operating instructions of your vehicle.
• Furthermore, the installation instructions (especially torques for screws) and the prescribed maintenance intervals must be observed.
• OTHER INFORMATION
  • Please visit us occasionally on our website at www.CUBE.eu. There you will find news, information and the latest versions of our manuals as well as the addresses of our specialist dealers.
  • Pending System GmbH & Co. KG
  • Ludwig-Hitter-Str. 5-7
  • D-95679 Waldershof
  • +49 (0)9231 97 007 80
  • www.cube.eu

TOOLS

If a crank is already installed before installing the product, this should be properly removed in accordance with the respective instruction manual!

Place the washer on the pedal hole before mounting the pedal.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>