DIVINE GRILLZ DENTÅLIMPRES Grillz Mould Kit Instructions
- June 1, 2024
- DIVINE GRILLZ
Table of Contents
DIVINE GRILLZ DENTÅLIMPRES Grillz Mould Kit
Product Information
- Specifications
- Product: Dental Moulding Kit
- Includes: Colored and white impression putty
- Website: www.divinegrillz.com.
The product is a dental moulding kit designed for creating custom-fitted mouthguards or dental impressions. It includes coloured and white impression putty for moulding.
Product Instructions
- Brush your teeth thoroughly and put on gloves before starting the moulding process.
- Mix 1 part coloured impression putty with 1 part white impression putty quickly (within 30 seconds).
- Apply the mixed putty onto the dental tray within 2 minutes and 30 seconds.
- Place the tray in your mouth and press it firmly against your teeth to create the mould.
- Ensure all teeth are well defined and the gum lines are visible in the impression.
- Visit the website for full detailed instructions on moulding your dental impressions.
FAQs
- Q: How long does the putty take to harden?
- A: The putty hardens quickly, usually within a few minutes after mixing, so it is recommended to work fast once the putty is prepared.
- Q: What should I do if my impression does not turn out well?
- A: If your impression is not satisfactory, you can discard it and try again with a new mix of putty following the instructions provided.
WHAT INCLUDED
Usage Instructions
Please read the following instructions carefully if you want your mould to be useful. Read them all through before you start and take the mould as fast as possible, because the putty hardens quickly
- Brush your teeth & put on gloves
- Mix 1x coloured + 1x white impression putty for max. 30 sec. until solid colour (no white spots)
- Roll quickly into a ball and then into a thick cylinder shape, without creating folds. Do this step fast
- Put the mixed putty softly into the tray, making sure it’s not folded anywhere (!). Do this step fast
- Push the tray firmly onto your teeth (with your thumbs) in one move. Make sure your teeth are fully covered with putty, don’t scrape the tray with your teeth. DON’T wiggle or move the tray until the putty is fully hardened.
- Leave in for 2,5 minutes (02:30). Don’t bite on the tray, just hold the front of the tray with one hand.
- Remove by pulling it down gently, don’t wiggle it left to right – only softly front to back if necessary!
- Still struggling? Watch a YouTube video.
GOOD
All teeth are well defined and the gum lines are visible. Your impression should look something like this! 🙂
NOT GOOD
The client didn’t push the tray up onto their teeth in one smooth move. It’s moved too much. You can see the putty is cracked and the teeth and gum lines aren’t defined enough. You can also see the (white) tray at the front because the teeth were scraped onto it. Avoid this.