SEALEY SX210 23PC-VAG Locking Wheel Nut Key Set User Manual

: June 16, 2024
: SEALEY

Table of Contents

SEALEY SX210 23PC-VAG Locking Wheel Nut Key Set
Product Information
SAFETY
INTRODUCTION
CONTENTS
OPERATION
MAINTENANCE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SEALEY SX210 23PC-VAG Locking Wheel Nut Key Set

Product Information

Specifications

Model: SX210
Number of Pieces: 23
Manufacturer: Sealey

Introduction
The Locking Wheel Nut Key Set 23PC-VAG Model No: SX210 is a set of twenty- two locking keys designed for the removal of spline and ribe locking wheel nuts on VAG vehicles. It includes a 17mm wheel nut socket with a 1/2 sq. drive.

Contents

Component	Description
SX210.01	Locking Wheel Nut Socket 1/2 Dr. VAG
SX210.02	Locking Wheel Nut Key. (51/6PT)

Operation

Step 1: Choose the Correct Locking Wheel Nut Key
Identify the correct locking wheel nut key for your vehicle from the set of keys. Ensure the key matches the size and type of wheel nut/bolt you need to remove.
Step 2: Insert the Key into the Socket
Push the selected locking wheel nut key into the corresponding socket provided.
Step 3: Position the Key over the Wheel Nut/Bolt
Place the key over the wheel nut/bolt and rotate it until the key slots into the wheel bolt/nut securely.
Step 4: Attach a Socket and Remove the Wheel Bolt/Nut
Attach a 1/2 drive socket to the key socket and turn it anti-clockwise to loosen and remove the wheel bolt/nut.
Step 5: Storage After Use
After use, it is recommended to replace the key and socket in the provided carry case for safe storage.
Step 6: Replacing the Wheel Bolt/Nut
To replace the wheel bolt/nut, reverse the removal operation. Use a torque wrench to tighten the bolt/nut to the recommended specification.

FAQ

Q: Can I use this tool if it is damaged or faulty?
A: No, it is important not to use the tool if it is damaged or thought to be faulty. Using a damaged tool can cause further damage or personal injury.
Q: What precautions should I take when using this tool?
A: Make sure to adhere to Health & Safety, Local Authority Regulations, and general workshop practice Regulations when using tools. Follow all workshop safety rules, maintain correct balance and footing, and keep children and non- essential persons away from the working area.
Q: Can I use the tool for tasks it is not designed for?
A: No, it is important not to use the tool for tasks it is not designed to perform. This can cause damage to the tool or may lead to personal injury.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SAFETY

WARNING! DO NOT use the tool if damaged or thought to be faulty.
WARNING! Ensure that Health & Safety, Local Authority Regulations, and general workshop practice Regulations are adhered to when using tools.
WARNING! If jacking up a vehicle refer to manufacturer instructions for vehicle and jack.
DO NOT use the tool for a task it is not designed to perform.
DO NOT use worn, or damaged sockets.
DO NOT use the tool unless you have been instructed in its use by a qualified person.
DO NOT operate the tool if you are tired or under the influence of alcohol, drugs, or intoxicating medication.
Maintain the tool in good condition.
Follow all workshop safety rules, regulations, and conditions.
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
Keep children and nonessential persons away from the working area.

INTRODUCTION

Set of twenty-two locking keys for the removal of spline and ribe locking wheel nuts on VAG vehicles. Includes 17mm wheel nut socket with 1/2” sq. drive.

Component	Description		Component	Description
SX210.01	Locking Wheel Nut Socket 1/2” Dr. VAG		SX210.13	Locking Wheel

OPERATION

Choose correct locking wheel nut key for the vehicle, and push into socket.
Place the key over the wheel nut/bolt and rotate until the key slots into the wheel bolt/nut.
Attach a 1/2” drive socket to the key socket and turn anti-clockwise to remove the wheel bolt/nut.
Replace key and socket in carry case after use.
To replace bolt/nut reverse removal operation. Use torque wrench to tighten.

MAINTENANCE

Keep keys and adaptor clean and store in the case provided.

Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk, email [email protected], or telephone 01284 757500.

Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories, and packaging should be sorted, taken to a recycling center, and disposed of in a manner that is compatible with the environment.

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications, and parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: The guarantee is 12 months from the purchase date, proof of which will be required for any claim.

Sole UK Distributor,
Sealey Group. Kempson Way, Suffolk Business Park, Bury St. Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
[email protected]
© Jack Sealey Limited