NEXXT AX18DO Dual Band Mesh Router Instruction Manual

NEXXT AX18DO Dual Band Mesh Router Instruction Manual

INSTALLTION Instruction

Equipment Front Indicator

Equipment port and cable connection guide

Equipment port and cable connection guide

Instructions for configuring Internet access using mobile phone

1. U髓 the mobile phone to connect the router W1丰l See the nameplate at the bottom of the router for the Wi-Fi name
   Model name: UNR033Z
   Item name : UNI-WIFl6M
   Power:   12V-1 SA
   IP :192.168.0.1 User name admin
   User password : APUM_Und01
   SS旧，UnlWIFI XXXX/UnlWIFI xxxx SG
   W旧Password:xxxxxxx

Made In China ·

2. After the connection is successful, enter the address 192.168.0.1 in the browser, and the mobile phone will automatically log in to the quick setting inte巾臼

FCC WARNING：

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

if this equipment does cause harmful interference to radio or television reception, which can be determined by turning thee auioment off and on. the user is encouraged to try to correct the interference by one or more of the followin a measures’:

• Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure quidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Instructions for configuring Internet access using mobile phone

Set the Internet access mode, and the default is “dynamic access’ (due to different Internet access modes, select the Internet access mode and set it)
Set WiFi account and password, and cli昧 ” save effective”
WIFI After setting, reconnect WiFI when the indicator light is blue.

Common Problem

1. . What should I do if there is a problem setting up the router? • If the router WiFi cannot be found on the machine: please ensure that the router is powered on, wait a moment (after the router is started), and then scan on the machine

   • If you can’t access the router configuration boundary: please ensure that you are connected to the router WiFi, and then enter “192.168.10.1” in the browser to access

2. What if you forget the login password of the router management community?
   Please restore the router to its settings, and then refer to the configuration instructions.

3. How do I reset the router to its settings? Tum on the router. After the router is started, press the “reset” hole of the router with a needle and release it after holding it for more than 5 seconds, The lamp goes out about 3 seconds after release. Wait until the router restarts and the red light is on, then the reset is completed

4. When a new software version is released, will the router be upgraded?

   • It will be upgraded. As long as the router can go up and down, it will automatically detect the upgrade flow and restart the router after the upgrade

5. How to pair the mesh function of the router?

   • When the two routers are powered on, press the mesh button of the two routers in tum, and the lights of the two routers will flash blue, that is, the two devices are pairing, and the pairing is expected to be completed within 2 minutes, and the lights of the two devices are blue and always on.

Environmental requirements

This form is compiled in accordance with the provisions of the SJfT11364 s回ndard. 。

indicates that the content of this toxic and hazardous substance in all homogeneous materials of this pa『t is below the limit r闵uiremenl of the G BIT stand a时．

X indicates that the content of由e toxic and hazard口us substance m at least one of the homogeneous materials of the pa时exceeds G B IT 2 6 5 7 2 The specifiea limit 阳quirements.

This table shows the hazardous substance information contained in this device. The hazard口us substance ini町mation of the parts is based on the i『，formation provided by the supplier and the internal Inspection 『·esults. The hazardous substances contained In some pa同s are impossible b 「eplace under the current techni但l   standards .

The number in this lo目口 indi臼tes that the EFUP of the 街画川unde E咽皿温‘m吃have an E阳m础，删the EFUP shall胎subject 电医…• to te numbe「 in the m. a『’k.Due to different models, the oduct may not con恒in all the above components except 『－ the host. Please re俗r to the actual sales configuration of the product.

Repair description

Warranty description

I. Thank you for purchasing our products. To protect the rights and interests of the purchaser, please fill in this card carefully, and read the following warranty terms carefully.

1.  Please keep this warranty service card properly. If the warranty service card is lost, it will not be reissued. Please be sure to keep the invoice or copy or relevant valid proof of purchase. If you cannot provide a valid proof of purchase, Then the product warranty period will start from the date of manufacture.
2. This warranty card must be provided at the time of warranty. 3. The information filled in this warranty card should be true, otherwise it will be invalid.
3. If the host of this product is sold within 18 months, free after-sales maintenance service is guaranteed if a hardware failure occurs under normal use conditions.

II. The company has the right to charge maintenance service fees if the following factors are involved:

1. Due to natural disasters (floods, fires, earthquakes, lightning strikes, typhoons, etc.) Damage caused by careless use;
2. Disassemble, repair, or send the product to a repair centre which is not certified by the company for inspection and repair,
3. The company’s warranty identification label is tom or cannot be identified, the warranty service card is altered or the product is inconsistent
4. Other problems and malfunctions caused by abnormal use.

ill. The company will strictly abide by the Three Guarantees policy formulated by the state for warranty service.
The right to interpret the warranty regulations and contents belongs to our company, and are subject to change without notice. Customer Service:support@ancatus.com

Certificate of quality

Documents / Resources

| NEXXT AX18DO Dual Band Mesh Router [pdf] Instruction Manual
AX18DO Dual Band Mesh Router, AX18DO, Dual Band Mesh Router, Band Mesh Router, Mesh Router, Router
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>