SERA 100826759 Compact Disc Stereo System Installation Guide
- June 1, 2024
- SERA
Table of Contents
SERA 100826759 Compact Disc Stereo System
Tools required for installation
- Tape measure (3m-5m)
- Electric drill
- Drill bit (Ø8)
- Silicone
- Pencil
- Screwdriver
Specifications
| Item | Description | Quantity |
|---|---|---|
| 4A | Screw cap 185.5 | 4 PCS |
| 4B | Screw 470 | 5 PCS |
| 8C | Wall Plug 840 | 8 PCS |
| 4D | Screw 450 | 5 PCS |
| 1E | Bracket* | 1 PCS |
Installation Steps
- Ensure the dimensions are correct: cabinet should measure 850mm in width with a height of 160mm.
- Prepare the wall area where the cabinet will be installed, marking 690mm from the floor.
- Use the appropriate screws and brackets (4A, 4B, 4C, 1E, 4D) to securely attach the cabinet to the wall.
- Place the silicone on both sides of the sink area before installing the sink.
- Install the sink onto the cabinet and secure it with silicone for a waterproof seal.
FAQ
-
What are the measurements for the cabinet?
The cabinet should measure 850mm in width and 160mm in height. -
How high should the cabinet be installed from the floor?
The cabinet should be installed 690mm from the floor. -
What tools are needed for the installation?
You will need a tape measure, electric drill, Ø8 drill bit, silicone, pencil, and screwdriver. -
How many screws and brackets are required?
You will need 4 screw caps (4A), 5 screws (4B), 8 wall plugs (8C), 5 screws (4D), and 1 bracket (1E). -
What is the purpose of the silicone in the installation?
Silicone is used to create a waterproof seal around the sink when installing it onto the cabinet.
Tools required for installation
CABINET
ASSEMBLY INSTRUCTION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>