EPLO DP7 Smart Toilet with Built in Bidet Installation Guide

June 16, 2024
EPLO

EPLO DP7 Smart Toilet with Built in Bidet Installation Guide

Installing your product

Install your unit using the following steps

FIG 3 Open the box right side up .JPG

Testing the product

(Test whether the functions of the buttons on the remote controller and the knobs on the side of the body are normal)

  • Are all the functions working property?
    Rear Wash, Front Wash (Including water pressure & nozzle position adjustment), Heated Dryer, Water & Seat temperature Adjustment, Nozzle cleading, Anion Deodorization, Remote control.
    All functions listed above should be tested.

  • Checking Rear Wash
    Please use your hand to hold the seat sensor area, tum the knob forward or press the “Rear Wash” button on the remote controller, and use your hand to cover the front of the washer to block the flow of wash water to avoid spraying water on your body or clothing.

Matching your remote control code

*When the product leaves the factory, the remote control and the product are connected, if the remote control went failure, please re-connect the code as following methods.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals