SCHRACK BZH14241 Digital Twilight Switch User Manual
- June 16, 2024
- SCHRACK
Table of Contents
**SCHRACK BZH14241 Digital Twilight Switch User Manual
**
Connection
Battery
Technical data
-
Supply voltages: 230 V, 50-60 Hz
-
Contact material: AgSnO2
-
Suitable type of lamps: CFL, LED lamps
(230V) 2000W
D (230V) 200W -
Time base: Quartz
-
Quartz accuracy (at 20°C): ≤ ±0.5 sec./day (Quartz accuracy optimized for typical ambient conditions)
-
Ambient temperature: -30° … +50°C
-
Type of protection: IP 20 to DIN EN 60529
-
Class of protection: II when installed according to regulations
Intended Use
The twilight switch fits for the particular use of the following tasks: light control for streets, outdoor stairs, shop windows, buildings etc. Operate it in a dry room only! (the sensor is mounted outdoors)
WARNING:
- The installation and assembly of electrical equipment must be only carried out only by a skilled Person! Otherwise fire danger or danger of an electric shock exists!
- Disconnect the mains power supply prior to installation and/or disassembly!
- Connect the supply voltage/frequency as stated on the product!
Sensor
The connecting cable must be a rubber insulated cable according to H05RR-F or higher (outdoor), or a PVC insulated cable according to H05VV-F or higher (indoor).
Manual switching
ON = > OFF => ON => OFF …
ON = > PERMANENT OFF => OFF => PERMANENT ON …
Program
Daylight saving time [EU / OFF] PIN-Code [NO / YES] Hysteresis [LUX] Delay time [On: LUX / Off: LUX]
Checking
Current lux value = 555 lux
Current lux value = 10.000 lux