SCHRACK TECHNIK LIVB0012-E Series Devo Pro II Led Instruction Manual
- June 12, 2024
- SCHRACK TECHNIK
Table of Contents
SCHRACK TECHNIK LIVB0012-E Series Devo Pro II Led
Product Information
- Product Name: GB D Series Devo Pro II Led
- Dimensions: 150 mm x 5.98 mm x 5.58 mm
- Installation: The installation should be carried out by an electrician or by any similarly qualified person.
- Preventing Damages: Prevent from damages through electrostatic discharges and from mechanical impacts. A discharge of static electricity may damage sensitive components. Always be properly grounded when touching leads or circuitry inside the luminaire. Use a wrist strap connected by a ground cord to the reflector. Avoid touching light source (LEDs) with bare hands. This may cause significant loss of brightness.
- Cable Installation Options: There are two cable installation options available.
- Luminaire Materials: Agressive chemicals, in direct contact with the luminaire or in the form of airborne substances, can damage the fitting. So can unsuitable cleaning agents. Do not use any alkaline or acidic solution nor any solvents. Do not use any cleansing agents that are aggressive on plastics.
Series Devo Pro II Led
The installation should be carried out by an electrician or by any similarly qualified person.
Prevent from damages through electrostatic discharges and from mechanical impacts.
- A discharge of static electricity may damage sensitive components.
- Always be properly grounded when touching leads or circuitry inside the luminaire.
- Use a wrist strap connected by a ground cord to the reflector.
- Avoid touching light source (LEDs) with bare hands.This may cause significant loss of brightness.
DIP Switch Settings
Product Name | Current (mA) | Power (W) | Flux (lm) |
---|---|---|---|
LIVB0012-E | 200 | 23 | 3000 |
LIVB0013-E | 200 | 30 | 4400 |
LIVB0014-E | 200 | 35 | 4800 |
LIVB0015-E | 200 | 44 | 6000 |
Cable installation options
Option 2
Option 3
Product Usage Instructions
- Cable Installation:
- Option 1: Follow the instructions under Option 1 in the manual.
- Option 2: Follow the instructions under Option 2 in the manual.
- Option 3: Follow the instructions under Option 3 in the manual. (Separately available)
- Preventing Damages:
- Ensure that you are properly grounded when touching leads or circuitry inside the luminaire.
- Use a wrist strap connected by a ground cord to the reflector.
- Avoid touching the light source (LEDs) with bare hands as this may cause significant loss of brightness.
- DIP Switch Settings:
- Refer to the DIP Switch Settings table above to determine the appropriate settings for your desired current, power, and flux.
- Luminaire Maintenance:
- Avoid using aggressive chemicals, alkaline or acidic solutions, solvents, or cleansing agents that are aggressive on plastics for cleaning the luminaire.
- Replacing Light Source:
- The light source contained in this luminaire should only be replaced by the manufacturer, his service agent, or a similarly qualified person.
- Disconnect the power supply before opening the luminaire.
For more information and detailed instructions, please refer to the user manual provided by Schrack Technik GmbH.
Luminaire materials
Aggressive chemicals, in direct contact with the luminaire or in the form of airborne substances can damage the fitting. So can unsuitable cleaning agents. Do not use any alkaline or acidic solution nor any solvents. Do not use any cleansing agents that are aggressive on plastics.
CAUTION, RISK OF ELECTRIC SHOCK!
Disconnect supply before opening! The light source contained in this luminaire
shall only be replaced by the manufacturer or his service agent or similar
qualified person.
Schrack Technik GmbH
Seybelgasse 13
AT-1230 Wien
www.schrack.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>