Binecer RH-819 Heated Foot Massager Instruction Manual

June 15, 2024
Binecer

Foot Massager | RH-819
Instruction ManualBinecer RH 819 Heated Foot
Massager

Thank you very much for purchasing our products and for your support. Please read the instructions carefully before you use this product. After you read it, please keep it properly.

Important Safety Instructions:

Binecer RH 819 Heated Foot Massager -
Symbol

  1. It is forbidden for people who are unconscious or sleeping to use this massager.
  2. Do not use this product for too long at a time.
  3. Children should be supervised to ensure that they do not play with this product.
  4. The product has a heating surface, and people who are not sensitive to heat must pay attention when using it.
  5. Please do not stand up to use this product to avoid injury.
  6. If the power cord is damaged, it must be replaced by a professional from the manufacturer or its repair department to avoid a hazard.

About Products

what’s in the Box

  • Foot Massager x 1
  • Wireless Remote Control x 1
  • Power Adapter x 1
  • User Manual x 1

Binecer RH 819 Heated Foot Massager - About ProductsBinecer RH 819 Heated Foot Massager -
Plug

How To Use

  1. Place the foot Massager on a flat floor.
  2. Connect the adapter cable to the corresponding port on the massager.
  3. Plug the power adapter into the power outlet.
  4. Put your feet (Fit Feet up to men size 14) into the massage area before the machine Starts. It is recommended to wear thick socks for foot massage.
  5. Turn on the device by operating the control panel to enjoy a comfortable massage.

Binecer RH 819 Heated Foot Massager - Button
Instruction

Button Instructions

  1. **** Power button: Press the power button to turn on or off the machine. The default 15-minute timer is turned on, and it is adjusted to a 30-minute timer by pressing it once. If the timer is not adjusted, the machine will be turned off by pressing the power  button after three minutes of operation.
  2. Knead Speed button: 3 intensity—LOW/Medium/High/OFF
  3. Air Intensity button: 3 intensity—LOW/Medium/High/OFF.
  4. Vibration button: 3 intensity—LOW/Medium/High/OFF.
  5. Heat button: There are 2 adjustable temperature levels, the low temperature range is 113-122F, and the high temperature range is 122-131F.

Cleaning

  1. Please make sure the machine is turned off and unplugged before cleaning.
  2. Do not immerse the massager directly in water or any other liquid, and keep away from all solvents and harsh cleaning agents such as benzene or thinner.
  3. Please use a dry cloth to clean the surface of the product.

Storage

  1. Please store the machine in a box in a safe, cool, dry and ventilated environment.
  2. Please do not twist the power cord.
  3. Avoid scratching the surface of the product with sharp objects and do not place the product in direct sunlight or high temperature.
  4. Do not hang the product by the power cord.
  5. If you do not use the product for a long time, please use the cover to prevent dust.

Product Specification

Input Voltage: 100-240V
Rated Frequency: 50Hz-60Hz
Output Voltage: 12V
Rated Power: 24W
Default Timer: 15 minutes

Warranty

The manufacturer’s warranty is void under the following circumstances but not limited to:

  • Improper or inadequate maintenance or modification.
  • Accident, misuse, abuse, contamination,or other external causes.
  • The use of unspecified adapter and accessories.
  • Damages that occurs as a result of one’s failure to follow the instructions.
Problem Reason Solution
Machine does not work when powered on. Switch not turned on. Turn on the

power.
Poor contact between plug and socket.| Make sure the socket makes good contact with the plug.
After an hour of continuous use, it takes less than 20 minutes to restart the machine.| Turn on the product after 20 minutes.
The massager suddenly stops during work.| Timer time is up.| Machine default 15 minutes will automatically shut down to protect your health, if you still want to use please restart the machine.
When the motor works for a long time, the overheat protection device is forced to stop.| If you want massage again, please use it after 20 minutes.
There is a greater external force applied to the massager.| Please make sure to put your feet into the massager with the power off, keep relaxed, do not apply external force to the massager. Please do not stand up to avoid danger.
Remote control does not work| Unplugged bottom battery protection,| Please check whether the transparent film at the bottom of the remote control is pulled out, if not, please pull out the transparent film and use it again.
Heating does not work| Not set to high temperature gear.| Please press the heating button to set the temperature to high temperature, high temperature up to 131 F.
Foot massage is painful.| The arch of the foot is not aligned with the massage head.| You can put on socks and move your feet up and down so that the  arch of the foot is aligned with the massage head for a better experience.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Operation is subject to the following three conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Do not use this appliance near water

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals