CROWNFUL B15-MF01-BKUS Milk Frother and Steamer User Manual

: June 16, 2024
: Crownful

Table of Contents

IMPORTANT SAFEGUARDS
GETTING TO KNOW YOUR CROWNFUL MILK FROTHER
BEFORE FIRST USE
OPERATING INST TIONS
CARE, CLEANING AND STORAGEX
TROUBLESHOOTING
FCC STATEMENT
WARRANTY INFORMATION
CUSTOMER SUPPORT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CROWNFUL B15-MF01-BKUS Milk Frother and Steamer User Manual

IMPORTANT SAFEGUARDS

We at Crownful prioritize the safety of our customers above all else. We are dedicated to designing and manufacturing consumer products with your safety as our top priority.
You, our valued customer, are at the forefront of every decision we make.

As always, be cautious when using electrical appliances and follow basic safety precautions.

READ ALL INSTRUCTIONS, SAFEGUARDS AND WARNINGS BEFORE USE. FAILURE TO FOLLOW THESE SAFEGUARDS AND INSTRUCTIONS MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE.

For countertop use only. Always operate the appliance on a stable, non-combustible, level surface.
For household use only. Not for commercial use. DO NOT use the appliance for
anything other than its intended use.
Make sure that your outlet voltage corresponds to the voltage stated on the rating label, located on the sticker under the base.
D0 NOT operate the appliance while the milk jug is empty.
Avoid spillage on the connector.
To protect against fire, electric shock and injury to persons, DO NOT immerse the power cord, plug or the appliance base in water or other liquid.
Unplug from outlet when not in use and before cleaning. After using a program that heats, there will be residual heat within the milk jug. Allow the appliance to cool before putting on or taking off parts, and before cleaning
Regularly inspect the appliance and power cord. DO NOT operate the appliance if the power cord or plug is damaged, or after the appliance malfunctions or is dropped or damaged in any manner. For assistance, contact Customer Care at support@crownful.com
D0 NOT let the power cord hang over the edge of tables or counters, and DO NOT allow it to touch hot surfaces.
DO NOT place the appliance on or near a hot gas or electric burner, o in a heated oven.
Fill the milk jug with only milk or non-dairy milk alternatives. Never fill the pitcher with ol or other liquids. DO NOT fill past the appropriate MAX fill lines for your desired setting, as hot liquid may be ejected.
Always operate the appliance with the lid in place. DO NOT remove the lid while frothing to avoid scalding injury.
Avoid contacting moving parts. Keep hands and utensils out of the milk jug while frothing to reduce the risk of personal injury and/or property damage.
Some parts of the appliance are hot when the appliance is in operation. Only use the handle to move or carry the milk jug.
Extreme caution must be used when moving the appliance when it contains hot liquids.
To disconnect, press (—) button and ensure the unit is off, then unplug the base from the power source. To unplug safely, grasp the plug and remove it from the outlet. Never pull from the power cord.
DO NOT use the appliance outdoors. Never leave the appliance exposed to sun, wind, rain and/or snow.
D0 NOT leave the appliance unattended when in use.
This appliance is NOT to be used by children or by persons with reduced physical, sensory or mental capabilities. Close supervision is necessary when any appliance is used near children and these individuals. Children should not play with this appliance.
The use of accessories not recommended by the manufacturer may result n fire, electric shock or injury to persons.
The appliance is only to be used with the base provided.
The appliance is not intended to be operated by means of an external timer or separate remote control system.
Do not touch hot surfaces. Use handles.
The appliance is not designed to mix a large quantity of dry ingredients or melt large food pieces eg. cubed chocolate, ground nuts, whole spices, fresh herbs, ice cubes etc.
The underside of the jug must always be clean and dry before placing onto the power base.
Attach the jug lid securely to the jug before operation. Do not remove the jug lid during operation.
Use caution when pouring foamed milk from the jug as the jug and hot milk may scald.
Do not operate the appliance without liquid. Always fll to at least the ‘FOAM” marking.
The milk jug must only be used with the power base provided. Do not use attachments other than those provided with the appliance as it may result in fire, electric shock or injury to persons.
Do not put metal or similar items into the milk jug as this may damage or affect the operation of the appliance.
Extension cords are available and may be used if care is exercised in their use:
- The marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance;
- The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over.

WARNING

Always ensure the frothing disc is securely attached to the milk jug before use.

WARNING

Frothing disc is a choking hazard. Children must always be supervised and never left
over. unattended with appliance.

WARNING

To avoid injury, read and understand the instructions in this user manual before attempting to use this appliance.

WARNING

Electrical shock hazard.

DO NOT use an adapter.
DO NOT remove the bottom cover. No user-serviceable parts inside. Repair should be done by authorized service personnel only.

Failure to follow these instructions may result in electric shock.

WARNING

THE FAILURE TO FOLLOW ANY OF THE IMPORTANT SAFEGUARDS AND/OR THE INSTRUCTIONS FOR SAFE USE IS A MISUSE OF YOUR APPLIANCE THAT CAN VOID YOUR WARRANTY AND CREATE THE RISK OF SERIOUS INJURY.

Special cord set instructions:
As per safety requirement, a short power supply cord is provided to reduce the hazards resulting from grabbing, entanglement and tripping,
This appliance has a polarized plug and one blade is wider than the other. To reduce the risk of electric shock, the plug s intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.

DO NOT attempt to modify the plug in any way.

GETTING TO KNOW YOUR CROWNFUL MILK FROTHER

Product Features
The CROWNFUL milk frother truly stands out as a remarkable and innovative device, specifically designed to effortlessly craft flawlessly frothed milk for a delightful array of hot beverages.

Built-in Magneti c Drive Motor: This frother excels in incorporating air into the milk, resulting in an irresistibly creamy texture and a remarkable increase in volume.

Five Preset Modes : Cold foam mode, warm thick foam mode, warm foam mode, warm milk mode, and hot milk mode.

Large Capacity : With its 560m| jug capacity, it allows you to prepare multiple frothy drinks at once. The maximum milk capacity for frothing is 150ml, and for heating milk is 400ml. To ensure a quick heating process for milk, it is advisable to avoid exceeding the MILK line which marks the recommended limit of 300ml. Going beyond this limit will result in prolonged heating time for the milk.

Comes with Two Frothing Discs : The ‘Cappuccino’ disc is installed by default for thick and creamy froth, while the ‘Latté’ disc is used for smooth and silky milk and is placed on the bottom of the frothier. You can switch the frothing disc depending on your desire.

Stylish Design & Easy to Clean: Scornful milk frothier is stylishly designed, adding a sleek and modern look to your kitchen. Non-stick coating jug offers you a no hassle cleaning.

Product Diagram

Juggled
walk Jug
Control Panel
Jug Handle 00—
Powerbase
Power Cord
stick
‘Cappuccino’ GQ Frothing Disc
‘Latte’ Frothing Disc *Place on the bottom of power base.

MILK
This line indicates a capacity of 300ml, which is the recommended amount for heating milk

FOAM
This line indicates a capacity of 150ml, which is the recommended amount for frothing milk.

Note:
To ensure optimal results, we highly advise adding milk in accordance with the fill line indicators. For optimal utilization, you can pour a maximum of 400ml for heating milk and 200ml for frothing milk. Overfilling the milk jug may result in overflow when utilizing the foaming setting. Do not overfill the milk jug.

Control Panel

Power Button
Short press this button to turn on/off the unit. When the unit is turned on, the (—) indicator light will illuminate and remain solid green.

FOAM Button (FoAM )
Short press FOAM to switch Warm Thick Foam Mode, Warm Foam Mode, Cold Foam Mode and OFF Mode

Warm Thick Foam Mode
The FOAM indicator light will illuminate and remain solid white. It heats and froths your liquid to create a rich, dense style of warm macrofoam. The crowning touch for your cappuccino.

Warm Foam Mode
The light indicator FOAM will illuminate and continuously flash in white color. It heats and froths, and with a gentle swirl of the pitcher at the end, creates a loose style of warm macrofoam – like a cloud floating on your café au lait and lattes.

Cold Foam Mode
The FOAM indicator light will illuminate and remain solid blue. It creates a luscious, silky macrofoam filled with millions of tiny bubbles. Use milk and coconut milk for the perfect cold brew topper.
Remark : The Milk Frothier does not chill when frothing. Use chilled liquid

OFF Mode
The FOAM indicator switches off, indicating a cessation of the milk frothing process.

MILK Button ( miLK )
Short Press MILK to switch Warm Milk Mode, Hot Milk Mode and OFF Mode.

Warm Milk Mode
When selected, the MILK indicator will illuminate in white glow to indicate that the milk heating process has begun. The milk will gradually reach a temperature of 104°F £5

Hot Milk Mode
When selected, the MILK indicator will illuminate in red glow to indicate that the milk heating process has begun. The milk will gradually reach a temperature of 140°F £5.

OFF Mode
The MILK indicator switches off, indicating a cessation of the milk heating process.

Product Packaging Content
Package Contents
1 x Milk Frothier
1 x ‘Latte’ Frothing Disc
1 x ‘Cappuccino’ Frothing Disc
1 x User Manual

Product Parameters Specie actions

Specification

BEFORE FIRST USE

Step 1 : Remove all packaging from your milk frother and its accessories – power base, milk jug, latte disc, cappuccino disc, jug lid. Remove and safely discard all promotional labels and packing materials attached to the CROWNFUL Milk Frother.

Step 2 : Wash the milk jug, frothing discs, lid in warm soapy water then rinse and dry thoroughly. Wipe the exterior of the power base with a soft damp cloth then dry thoroughly.

Step 3 : Select the ‘Capp’ or ‘Latté’ frothing disc. Choose the ‘Capp’ disc for thick and
creamy froth or the “Latté” disc for smooth and silky milk.

The Capp Frothing disc is installed by defalt. If you want to make smooth and silky milk, you can replace it with the ‘Latté” disc. The ‘Latté’ disc is placed on the bottom of power base. (For instructions on how to replace parts, kindly refer to page 12.)

CAPP
For thick and creamy froth.

LATTÉ
For smooth and silky milk.

Note:
If the disc is not inserted correctly, it may dislodge during operation, a grinding noise may be heard, or milk will not swirl. Do not operate the milk frother without a frothing disc inserted into the milk jug as this can cause uneven heating and burning,

Step 4 : Place the lid on the mlik jug and press down until itis secure.
Step 5 : Place the milk jug on the power base.
Step 6 : Plug in the power cord to the outlet

WARNING
Frothing disc is a choking hazard. Children must always be supervised and never left
unattended with the appliance.

WARNING
The power base contain electrical
components. To avoid fire, electric shock or personal injury, DO NOT machine wash, rinse or immerse the power base, power cord or plug in water or other liquids.

OPERATING INST TIONS

OPERATION STEPS
FOAM Mode
To access three different foam modes, simply press the FOAM button. You can choose
from Warm Thick Foam Mode, Warm Foam Mode, and Cold Foam Mode. To achieve
optimal foam, it is essential to use the ‘Cappuccino’ Frothing Disc while in foam mode. This specialized disc is specifically designed to expertly stir and create the desired foam consistency.

Pour in milk

Recommend to use cold, fresh (or freshly opened) milk. Warm milk will not foam up properly.
When pouring milk, pay attention to FOAM Line which is the interior line in the milk jug,
Note : The FOAM line on the milk jug indicates the recommended capacity of 150ml for frothing milk. Itis important not to exceed 200ml. Overfilling the jug may cause overflow when using the foaming setting,

Press FOAM to toggle between all foam modes.
The foam indicator will be changed as below that corresponds to the selected program.
Warm Thick Foam Mode : The FOAM indicator light will illuminate and remain solid white.
Warm Foam Mode : The FOAM indicator light will illuminate and continuously flash in white color.
Cold Foam Mode : The FOAM indicator light will illuminate and remain solid blue.
Off Mode : The FOAM indicator switches off, indicating a cessation of the milk frothing process.

When the program ends, the milk frother stops.
When the program ends, the milk frother will automatically stop and beep three times. The foam program duration can vary from 1.5 to 4 minutes, depending on the quantity and temperature of the milk being used.
Carefully remove the milk jug from the power base as the milk jug and contents will be hot. Be careful not to place the milk jug on a table cloth, plastic surface or heat sensitive surface which may scorch or melt. Remove the jug lid, pour and/or spoon out the frothed milk.

NOTE : Swirl frothed milk in a circular motion before pouring milk into a cup or glass.

Clean the milk jug and frothing di: immediately after use.
Bothwill be hot, so follow the instructions on page 16 and allow them to cool completely before disassembling.

MILK Mode
To access two different milk modes, simply press the MILK button. You can choose Warm Milk Mode and Hot Milk Mode. To achieve optimal milk, it is recommended to use the ‘Latté’ Frothing Disc while in milk mode. This specialized disc is specifically designed for smooth and silky milk

Remove the ‘ Latté ‘ Frothing Disc from the bottom of the power base .
Hold the top of the jug lid, pull out the stick , and replace the ‘Cappuccino’ Frothing Disc witha ‘ Latté ‘ Frothing Disc .
Install the Stick back in place

Pour in milk

When pouring milk, pay attention to the Milk Line, which is the interior line in the milk Jug.

Note : The Milk line on the milk jug indicates the recommended capacity of 300ml for heating milk. It is important not to exceed 400ml. Overfilling the jug may cause overflow when using

Press the power button.
The power indicator stays illuminated.

Press the power button.

Press MILK to toggle between all milk modes.
The milk indicator will be changed as below that corresponds to the selected program.
Warm Milk Mod : When selected, the MILK indicator will illuminate in white glow to indicate that the milk heating process has begun. The milk will gradually reach a
temperature of 104°F 5.
Hot Milk Mode: When selected, the MILK indicator will illuminate in red glow to indicate that the milk heating process has begun. The milk will gradually reach a temperature of 140°F 5.
OFF Mode : The MILK indicator switches off, indicating a cessation of the milk heating process.

When the program ends, the milk frother stops.
When the program ends, the milk frother will automatically stop and beep three times. The milk program duration can vary from 2.5 to 7 minutes, depending on the quantity and temperature of the milk being used.
Carefully remove the milk jug from the power base as the milk jug and contents will be hot. Be careful not to place the milk jug on a table cloth, plastic surface or heat sensitive surface which may scorch or melt. Remove the jug lid, pour out the milk.

Clean the milk jug and frothing disc immediately after use.
Both will be hot, so follow the instructions on page 16 and allow them to cool completely before disassembling.

NOTE!
For hot cocoa drinks, please add water or milk first, then add the chocolate powder to the water/milk. Do not put chocolate bars into the cup, it will cause malfunction.

FROTHING TIPS
The colder the liquid, the better it is.
Always use the coldest, freshest milk or milk alternative possible before frothing, When frothing, millions of tiny air bubbles are introduced into the liquid. The longer it takes to heat up, the more air can be infused into the liquid. This immediately enhances the quality of your foam, and reduces your chances of scalding. No more bad froth days!
Note: Warm milk will not foam up properly

Infuse your foam with flavor.
Before frothing, add aromatic spices to the milk jug, like cinnamon, cardamom or nutmeg, or other fragrant items like lavender. The longer you allow your ingredients to steep, the stronger the flavors will be.

Give your milk frother a break!
When frothing big batches, allow the milk frother to rest for about 3 minutes after every 2 frothing cycles.

Do not overfill the milk jug.
For optimum froth, do not exceed the FOAM line marking inside the milk jug.

Tips for pouring frothed milk.
Swirl frothed milk in a circular motion before pouring milk into a cup or glass. Remove excess air bubbles from frothed milk by gently tapping the milk jug on a bench. Pour frothed milk promptly to avoid the milk from separating, Frothed milk that is not used immediately should not be reheated.

Clean for a Fresh Start!
Ensure the milk jug and frothing disc are clean before use.

PREPARATION GUIDE
As a general guide, the chart below shows some suggested milks, ingredients and uses
for the milk frother

SUITABLE LIQUIDS| FRESH MILK| COWFull creamlow fat, skim| SOYFull cream & low fat| GOAT| SHEEP|
---|---|---|---|---|---|---
UHT MILK| COWFull creamlow fat, skim| SOYFull cream & low fat| GOAT /
SHEEP| OAT / RICE| ALMOND
SUITABLE INGREDIENTS| POWDERS/ FLANKES| DRINKING CHOCOLATE| COCOA POWDER| CHAI TEA| CHOCOLATE FLAKES|
TOPPINGS / SYRUPS| TOPPINGS / SYRUPS| CARAMEL| CHAI TEA| HONEY| MAPLE
RECIPES| HOT DRINKS| HOT DRINKS| CAPPUCCINO| LATTE| FLAT WHITE| CHAI LATTE
COLD DRINKS| ICED CHOCOLATE| ICED COFFEE| ICED MOCHA| ICED CARAMELLATTE|

CARE, CLEANING AND STORAGEX

Clean your CROWNFUL Milk Frothier after every use to ensure the best possible flavor and to prevent milk from baking onto the inside of the milk jug.

Always unplug the milk frothier and let it cool to room temperature before cleaning.
Never use metal scouring pads, abrasive powders or harsh chemical detergents on any of the milk brother’s parts or components.

Let all parts dry thoroughly before use or before storage.

Parts	Cleaning methods and instruction
Jug Lid	Remove from the milk jug before cleaning. Dishwasher safe.
Milk Jug	Remove the milk jug from the power base before cleaning. With a

cloth, hand wash the inside of the jug with hot water and dish soap and rinse it with clean, warm water.With a barely-damp cloth, and wash the outside of the milk jug and wipe dry to prevent streaking.DO NOT rinse the milk jug’s exterior.DO NOT store liquid in the milk jug. Dishwasher safe.
Frothing disc| Remove from the milk jug before cleaning. Dishwasher safe.
Power Base| With a barely damp cloth, wipe visible particles from the base as needed. Allow to dry thoroughly before placing the milk jug.
Power cord| With a barely damp cloth, wipe visible particles from the power cord as needed.DO NOT fold the power cord when storing

Note :
To avoid fire, electric shock or personal injury, DO NOT machine wash, rinse or immerse the power base, power cord or plug in water or other liquids. The outside of the milk jug must always be clean and dry before placing on the power base prior to use.

Do not use alkaline or abrasive cleaning agents, steel wool or scouring pads on any part of the milk frothier as these can damage the appliance surfaces.
The milk jug, jug lid and frothing discs can be washed i the dishwasher (top shelf only) However to extend the life of the frothing discs, we recommend these are washed by hand.

TROUBLESHOOTING

Problem	Possible Cause	Solution
Milk is not foaming?	Milk is warm or too hot to foam.

Use cold, fresh (or freshly opened) milk.
Do not re-foam already heated milk.
Try reducing the quantity of milk in the milk jug.Try a different milk. Some milks and milk brands produce more froth than others, For example, we have found that some soy milk produces froth while others do not.Experiment with different milk options and frothing discs to achieve the desired result.•
Adding dense ingredients like thick syrups, heavy powders and large flakes can significantly reduce the amount of foam. This is normal.

Milk is not heating?| |

Ensure the power plug is inserted into the power outlet.
Ensure the milk jug is correctly positioned onto the power base.
Ensure that the milk frothier has been properly activated.

Frothing disc is not moving or is dislodged|

Frothing disc is not inserted correctly.
Frothing disc has dislodged during operation.
Ingredients have been added too quickly.

|

Stop operation.
Remove liquid from milk jug.
Ensure the frothing disc is securely and correctly attached. Refer to operation steps. Once attached, turn the frothing disc with your fingers, it should turn freely. If it doesn’t, contact CROWNFUL Customer Service.
Refill milk jug with liquid. Start frothing. Add ingredients (if desired) slowly and in small quantities after the milk has already started swirling.

There is an odor in the milk jug| There are residues of milk components from the previous use| Please clean the milk jug and frothing disc carefully.

FCC STATEMENT

This device complies with the provisions of Part 15 of the FCC Rules. The operation is
constrained by the following two factors

Condition:

The device may not cause harmful interference.
This device must accept any interference received, including unwanted operations that may cause interference.
Any changes or modifications not explicitly approved by the responsible party for compliance.
It may cause users to lose their permission to operate the device.
The device has been tested and found to meet the limitations of Class B digital devices,
According to Part 15 of the FCC Rules. These restrictions aim to provide reasonable protection against harmful interference in residential facilities. This device generates, uses, and can radiate radio frequency energy. If it is not installed and used according to the instructions, May cause harmful interference to radio communication. However, there is no guarantee that;
No interference will occur in specific installations. If the device does cause harm
Interference to radio or television reception can be determined intermittently by rotating the device. Users are encouraged to try one of the following methods to correct interference measures:
Redirect or reposition the receiving antenna.
The device is connected to a socket on a circuit different from the receiver.
Increase the spacing between the device and receiver.
Please consult a dealer or experienced radio/television technician for assistance.

FCC Radiation Exposure Statement

This device complies with the FCC’s specific operating instructions controlled environments that end users must follow to meet RF exposure compliance requirements. In order to maintain compliance with FCC RF exposuompliance requirements.
Please follow the operating instructions in this manual. This transmitter must not be located or operated in conjunction with any other antenna or transmitter. This device should be installed on the radiator and your body. The availability of certain specific channels and/or operating frequency bands depends on the country/region, and firmware is programmed at the factory to match threated destination where end users cannot access firmware settings.

WARRANTY INFORMATION

We grant 1 year warranty on the product commencing on the date of purchase. Within the guarantee period, we will eliminate any defects in the appliance resulting from faults in materials or workmanship. Please contact us at: support@crownful.com to launch a warranty claim.

This guarantee does not cover: damage due to improper use, normal wear or use as well as defects that have a negligible effect on the value or operation of the appliance. The guarantee becomes void if repairs are undertaken by unauthorized persons and if original product parts are not used.

CUSTOMER SUPPORT

Customer service contact information

1f you have any product questions or concerns, please don’t hesitate to contact us directly at support@crownful.com or visit our website at: www.crownful.com.
We have a hassle-free warranty and customer service team for satisfactory solutions to any issue you might have.

hanks for trusting CROWNFUL
for your household and kitchen needs!

SUBSCRIBE to our newsletter to get yourself
updated with latest great deals, gifts and valuable
information about CROWNFUL products.
Https://www.facebook.com/crownful.official

GOT QUESTIONS or CONCERNS?
Please contact support@crownful.com

And we’ll do our best to make you one of our HAPPY customers! We remain at your service! Of CROWNFUL
https://www.crownful.com/

ScantoFollowUs

@crownful.official Website: www.crownful.com