CROWNFUL K100H Digital Kitchen Scale Instruction Manual

: June 8, 2024
: Crownful

Table of Contents

FOREWORD
BASIC PRODUCT FEATURES
TECHNICAL PARAMETERS AND IMPLEMENTATION STANDARDS
BATTERY INSTALLATION METHOD
DISPLAY DESCRIPTION
KEY FUNCTION
WEIGHING INSTRUCTIONS
USE SUGGESTIONS
AUTOMATIC SHUT-DOWN
PRECAUTIONS
Customer Support
- Support Hours
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CROWNFUL K100H Digital Kitchen Scale

CROWNFUL K100H Digital Kitchen Scale

FOREWORD

To ensure proper usage, maintain the weighing accuracy and extend the scale’s life span, please read this manual carefully before use. If there’s anything you don’t understand or confused about, please don’t hesitate to contact our Customer Support Team. You can reach us at support@crownful.com.

BASIC PRODUCT FEATURES

This product uses high-precision sensors and high-performance CPU, accurate and reliable weighing.
LCD blue background showing white words
Overload prompt, automatic shutdown (2 minutes),etc.
With unit transfer switch
Super tempered glass panel support

TECHNICAL PARAMETERS AND IMPLEMENTATION STANDARDS

Product Name : Kitchen Cooking Scale
Product model : K100H
Power supply mode: 2 x 1.SV AAA
Weighing range : 3g—-10000g
Accuracy : 1g
Product error: ± 2%o+ 1 g

BATTERY INSTALLATION METHOD

First, take out the scale from the packaging box. Then, open the battery cover which is located at the back of the unit. Insert the 2×1 .5V(AM)batteries making sure they are in the correct position(positive and negative polarities). Finally, put the battery cover back to ensure that the unit sits stable and level.

DISPLAY DESCRIPTION

Display Description

KEY FUNCTION

“ON/OFF” button: This button is used for turning the unit on and off. When the unit is OFF, Press this button to turn it on. When the unit is ON, press this button to turn it off.
“TARE” button: Place the carrier tray on top of the scale(if there’s one).Press this button to perform the tare operation. It will start weighing when the display is zero.
“UNIT” button: This product has a variety of units to choose. Press this button for cycle selection.

WEIGHING INSTRUCTIONS

Place the product on a hard horizontal surface.
Place the carrier on the scale.
Press the “ON/OFP’ button to turn it on. After powering on, press “ON/OFF” to turn it off.
Wait for the display to display “0” before you can start weighing. Press the “UNIT’ button to perform unit conversion. Specifically, there are 6 converse on units as follows.
Tare Function: If you are using a bowl or container to weigh an object/ingredient/liquid but you only need the weight of the actual object inside the container, then use the TARE function. While the unit is turned on, place the bowl or container on top of the scale. The scale will then show the weight of the container. Press the TARE button and wait until the screen shows “0”.then,put the object that you would like to weigh and the screen will show the weight of that object.

USE SUGGESTIONS

Display “Er” means that the maximum weighing weight is exceeded.
The “LO-“‘ flashing indicates that the battery is low. Please replace the battery in time.

AUTOMATIC SHUT-DOWN

The product will automatically shut down if there is no button operation or the weight changes within about 2 minutes.

PRECAUTIONS

Place the scale on a clean, level surface during use.
The weighing capacity of the scale is 10000g maximum including the weight before peeling.
Do not use this product in a humid, hot, cold place.
This product belongs to high-precision electronic products. Please do not press hard on the scale to prevent falling or damage when moving.
This product is only for household weighing items, and should not be used for commercial settlement, measurement, etc.
If you see a smudge on the scale, wipe it with a soft cloth. Do not use any chemical agents and prevent water from entering the scale’s body.
Please remove the battery when not in use for a long time.
When the LCD display shows the battery is too low. Please replace the battery in time.
When the LCD display shows “Err”, the item is overweight. Please remove the item in time to avoid damage to the product (the maximum range of the product is 1 0000g)

Symbols

Customer Support

Should you encounter any issues or if you have any questions regarding your new product, feel free to contact our helpful Customer Support Team. Your satisfaction is our goal!

Email: support@crownful.com