CROWNFUL EK4360 Electronic Digital Food Scale Instruction Manual
- June 8, 2024
- Crownful
Table of Contents
- CROWNFUL EK4360 Electronic Digital Food Scale
- MAIN FUNCTION
- TO REPLACE BATTERY AND CHARGE
- LCD ICON INDICATION
- BUTTONS FUNCTION
- WEIGHING
- VOLUME MEASURING
- UNIT TRANSFER
- ZERO & TARE FUNCTION
- AUTO OFF (BATTERY POWER SAVING MODE)
- MANUALLY SHUT OFF
- HOW TO DISTINGUISH BETWEEN lb and oz?
- USE&CARE INSTRUCTIONS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CROWNFUL EK4360 Electronic Digital Food Scale
MAIN FUNCTION
- With high precision load cell.
- Water & milk volume measuring function.
- Low battery and over loaded warning function.
- Zero & tare function.
- Auto off function (2 minutes).
- Max Capacity:5KG/11LB
- Division:1g/0.1oz
TO REPLACE BATTERY AND CHARGE
2 x 1.5V (AAA) batteries (included)
Open the battery cover.Install new batteries by putting one side of the
battery down first and pressing down the other side.(Please observe the
polarity)
LCD ICON INDICATION
Note: When the weight of the item is less than 1000g, the unit of the electronic scale will display “g”; when the weight of the item is greater than 1000g, the unit of the electronic scale will display “kg”.
BUTTONS FUNCTION
- UNIT CHANGING BUTTON:
- ON/OFF, ZERO, TARE BUTTON:
Note: Buttons and are indicated in this manual.
WEIGHING
- Place the scale on a solid and flat surface. Place bowl (if any) on the scale.
- Press button to turn on the scale.
- Start weighing when LCD shows “0”. Press UNIT button to convert to weighing mode.
- Load weighing object on scale(or bowl) to start weighing. LCD will show the weight reading.
- If the weighing object is liquid, press the UNIT button to convert the scale to water or milk volume mode, it will show the volume.
VOLUME MEASURING
- Place the scale on a solid and flat surface.
- Press button to turn on.
- Press UNIT button to convert the mode to water or milk volume mode when LCD shows”0″.
- Put a container onto the scale platform, LCD shows the weight of the container.
- Press button for Zero or Tare.
- Pour liquid (water or milk) into the container, LCD shows the volume of the liquid.
UNIT TRANSFER
After turning on the scale,press the UNIT button to switch to the unit you
want. Easily switch between 7 different units:
lb;oz,fl oz,milk fl oz,g,kg,ml,milk ml.
NOTE: The unit system of the scale depends on the distribution location or the distributor’s requirement.
ZERO & TARE FUNCTION
To weigh different loads consecutively without removing loads from the scale is: First, you need to load the scale add get the weight reading. Then,press the button to reset the LCD reading to“0”before adding the next load. You may repeat this operation.
Condition 1: “ZERO” function
When total sum of all loads on scale ≤4% of scale’s max .weight capacity: LCD
will show —– or 0g each time is pressed. —– means not stable, please wait for
a moment. 0g and meanwhile an icon on the LCD mean ZERO function is activated.
Max .weight capacity remains unchanged.
(For example:
When capacity is 2000g, 4% is 80g; When capacity is 5000g, 4% is 200g)
Condition 2: “TARE” function When total sum of all loads on scale 4% of
scale’s max.weight capacity: LCD will show —– or 0g each time
is pressed. —– means not stable, please wait for a moment. 0g and meanwhile an
icon on the LCD mean TARE function
is activated. Max.Weight capacity is reduced by total weight of all loads.
(For example: When capacity is 2000g, 4% is 80g; When capacity is 5000g, 4% is
200g)
Under this condition:
By pressing , you can see the total weight of all loads on the scale. If you
want to weigh more loads, just press LCD reading to ‘0’ again.
AUTO OFF (BATTERY POWER SAVING MODE)
If there is no operation or weight changes in two minutes,the scale will automatically turn off.
MANUALLY SHUT OFF
To maximize the battery life,always turn off the scale after using by long- pressing the button.
HOW TO DISTINGUISH BETWEEN lb and oz?
When you set the mode to lb;oz, put the object you want to weigh, lb is displayed before the “ : ”, and oz is displayed after the “ : ”.
WARNING
-
OVER LOADED WARNING
When LCD shows Err, it is over loaded( Max capacity is shown on product), please take off the loads to prevent damage to the scale. -
LOW BATTERY WARNING
When LCD shows Lo, battery power is low, please replace with new battery (ies)
USE&CARE INSTRUCTIONS
- Clean the scale with slightly soft cloth.DO NOT immerse the scale in water or use a chemical/corrosive cleaner. Keep the scale in a cool dry place.
- Always use the scale on a solid, flat surface. Keep the scale in a steady position when weighing.
- This product is precision instrument,please handle with care.Do no strike, shake or drop the scale.
- If it fails to turn on, please check whether the batteries are installed or the batteries’ power is low.
- Keep away from high temperature areas or objects and do not strip the scale arbitrarily.
- Designed for home use only ,not for commercial use.
- Always allow the scale to acclimate to normal room-temperature before using.
- Make sure that the scale is placed on a flat surface. Uneven or little surfaces may contribute to inaccurate results.
- Dirt, dust, vibration, wind ,air-currents and electromagnetic interference may result in inaccurate results.
- Avoid exposure of the device to extreme heat or cold and damp environment.
- DO NOT exceed the 11lb/5kg rating as doing so might permanently damage the device and/or the sensor inside.
CAUTION: DO NOT submerge the device in liquid. All plastics parts should be cleaned immediately after contact with fats, spices,vinegar and strong flavored/colored foods.(Avoid contact with acids like citrus juice.)
CUSTOMER SUPPORT
Should you encounter any issues or if you have any questions regarding your
new product,feel free to contact our helpful Customer Support Team.Your
satisfaction is our goal!
Email: support@crownful.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>