SENCOR SEP 720 BT Bluetooth Headphones User Manual
- June 16, 2024
- SENCOR
Table of Contents
- Supply content
- Description of BT Headphones and Controls |1| Touch control (right
- Putting into operation
- Bluetooth
- Touch control
- LED indicator
- Charging
- Specification:
- Safety Notice:
- Instructions and information regarding the disposal of used packaging
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SENCOR SEP 720 BT Bluetooth Headphones User Manual
Supply content
Headphones
User’s manual
USB-C charging cable
Description of BT Headphones and Controls |1| Touch control (right
earpiece)
|1| Touch control (right earpiece)
|2| Increase volume
|3| Decrease volume
14 Skipping to previous track
15 | Skipping to next track
| 6 | LED indicator
171 USB-C charging connector
I 8 | On/off button
PLAY/PAUSE (press 1x)
SIRI/Google Assistant (press 2x)
Answer an incoming call (press 1x)
End ongoing call (press 1x)
Rejecting an incoming call (long press)
ILI Left earpiece – left audio channel
IRI Right earpiece – right audio channel
Putting into operation
Before first use, be sure to read the safety instructions contained in this
user’s manual carefully.
Before first use, start charging the headphones to the maximum level.
Turning on the headphones – press and hold the power button in the default position and wait for the headphones to greet you.
Turning off the headphones press and hold the power button in the default position and wait for the headphones to announce the shutdown.
Warning: To prevent damage to your hearing, always keep the volume level of your device to a minimum before connecting BT headphones to your mobile device.
Note: The BT headphones will turn off after a longer period of inactivity unless they are paired to another device.
Bluetooth
To pair the BT headphones with your mobile device, do the following: Turn on the BT speaker and search for its Bluetooth name “SEP 720BT” on the device to which you wish to pair and start the pairing process. If you are requested to enter a pairing code while your device and the BT headphones are pairing, use the following code: “0000”.
To cancel the pairing process, disconnect the BT headphones from your mobile device (cancel the Bluetooth pairing).
Note: To ensure a stable Bluetooth connection, make sure that the distance between the BT headphones and your paired device is kept within 10 meters. Depending on ambient interference, in some cases It may be necessary to maintain a shorter distance between the BT headphones and the paired device.
Touch control
The touch control area will is located on the right earpiece.
To increase volume, slowly drag you finger from the “-” to the “+” position.
To decrease volume, slowly drag you finger from the “+” to the “-” position.
To go to next track, drag your finger from “right” to “left”.
To go to previous track, drag your finger from “left” to “right”.
Warning: To ensure proper function, keep the headphones touch control area clean. Avoid avoid random contact with other body parts such as hair. This may trigger the described function unexpectedly. Move your finger slowly on the touch area.
LED indicator
Orange LED charging in process
White LED – the charging process has finished
Orange/blinking white LED – the headphones are ready for pairing Solid
white LED the headphones are paired to your device
Charging
A charged battery provides power for several hours of operation at normal volume levels. A high volume consumes more battery power; therefore, we recommend listening at normal volume levels. Charging of the BT headphones will be indicated by an orange LED. The white LED indicates a fully charged battery in the process of charging.
Attention: For charging, use only the original accessories supplied with the appliance. To achieve maximum battery life, it is advisable to start charging the battery only when the battery is low (10%-20%). Charge continuously until fully charged. If the battery life is already very short, it is exhausted and we recommend you contact an authorized service centre for more information.
Recommendation: A low battery is first reported at 20% and then at 10%. We recommend that you start charging to full level at the first sign of a low battery.
Recommendation: If your headphones are not to be used for an extended period of time, we recommend to fully charge the batteries once every two to three months.
Specification:
- Bluetooth Version 5.3
- Maximum Transmitter Power 100mW @ 2.4GHz-2.4835GHz
- Bluetooth Version: V5.3 (JL 6956)
- Support Profile: a2dp\avctp\avdtp\avrcp\hfp\spp\smp\att\gap\ gatt\rfcomm\sdp\l2cap
- Driver Diameter: 40 mm
- Impendance: 320
- Sensitivity: 100dB±5 dB
- Frequency Range: 2.402 GHz-2.480 GHz
- Transmission Range: >10m
- Battery Capacity: 500 mAh
- Charging Time: About 4H
- Playing Time: About 18H
Safety Notice:
Please observe the rules of the Country or Region which you are in while
driving.
Do not disassemble or modify the headset at any reason, otherwise, It may
damage or burn the headset.
If there is any quality problem, please send headset to authorized service
center for repairing.
Please keep the equipment along with all the accessories out of the reach of
children and pets.
Extreme temperatures will cause the device deformation, reduce the charging
capacity and shorten the working life.
Please do not immerse the earphone into water. Guarantee will be lost if
damage is caused by immersed into water.
It will damage your hearing if you listen with high volume for a long time. It
is recommended that only use the lowest volume which is necessary for speak-
ing and listening to music.
Instructions and information regarding the disposal of used packaging
materials
Dispose of packaging material at a public waste disposal site.
Disposal of used electrical and electronic appliances
The meaning of the symbol on the product, its accessory or packaging indicates
that this product shall not be treated as household waste. Please, dispose of
this product at your applicable collection point for the recycling of
electrical & electro- nic equipment waste. Alternatively in some states of the
European Union or other European states you may return your products to your
local retailer when buying an equivalent new product. The correct disposal of
this product will help save valuable natural resources and help in preventing
the potential negative imp pact on the environment and human health, which
could be caused as a result of improper liquidation of waste. Please ask your
local authorities or the nearest waste collection center for further details.
The improper disposal of this type of waste may fall subject to national
regulations for fines.
For business entities in the European Union
If you wish to dispose of an electrical or electronic device, request the
necessary information from your seller or supplier.
Disposal in other countries outside the European Union
If you wish to dispose of this product, request the necessary information
about the correct disposal method from local government departments or from
your seller.
This appliance complies with EU rules and regulations regarding electromagnetic and electrical safety. Changes to the text, design and technical specifications may occur without prior notice and we reserve the right to make these changes.
Hereby, FAST ČR, a.s. declares that the radio equipment type SEP 720 BT is in compliance with Directive 2014/53/ЕЦ.
The full text of the EU declaration of conformity is available at the following internet address: www.sencor.eu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>