Lane G63 Smart Light Sound Machine User Manual

G63 Smart Light Sound Machine
User Manual

G63 Smart Light Sound Machine

Smart Light Sound Machine User Manual
G63

1. Short press and long press to decrease the volume
2. Short press pause/start long press on/off
3. Short press the previous song and long press to increase the volume .
4. Short press to control the light, long press to enter the clock setting (short press pause key to switch the cursor), long press to set the alarm clock (short press pause key to switch the cursor)

Technical parameter
Battery type: Lithium batteries .
(see outer box for capacity) :
Main function: Bt. TF. USB. Aux. 1
Size: 155°55° 160mm :
Speaker size: 36mm
Speaker resistance: 40 |
Speaker Output Power: 3W ;
Power Input: DC5v/2A
Key function operation instructions

1. Power on: Press and hold the power on button for two seconds to turn onthe device, and the ‘ default light is warm when turned on :

2. Bluetooth function usage:
   1This audio system supports the use of Bluetooth devices with A2DP function. First, turn on the device ,press and hold the M key to enter Bluetooth mode. The blue light of the Bluetooth indicator light flashes, accompanied by avoice prompt. At this time, the audio system is in a waiting state for pairing and connection. Only in this state can it be paired and connected to the Bluetooth audio system.

3. Mobile phone connection
   Step 1: Turn on the Bluetooth settings switch in the phone settings and click to search for devices Step 2: When the available device displays the G63 the character, it indicates that the phone has found Bluetooth audio system. Click on G63 to enter pairing mode. After the phone and the audio system are successfully paired, a voice prompt will appear indicating that they are connected,

Light usage:

1. The G63 Bluetooth speaker is equipped with various lighting effects
2. The default warm up effect when the device is timed on, short press the M key to adjust the light effect

TF card/USB drive function usage:

Insert the TF card/USB drive into the card slot, and corresponding voice prompt will appear. The product will automatically read and play the audio lies inside the card. Users can use the “+/-” button on the speaker to control the music  size and sound.

Safety instructions:

1. Do not expose the product to water or damp areas, such as bathrooms.
2. Please do not forcefully hit or drop the product to avoid manual damage.
3. When not in use for a long time, please turn off the power.

Warranty and after-sales service:
If you have any questions during use, please feel free to contact US, and we are responsible for every customer.

FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference ‘deceived, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,  the user is encouraged to try to correct the interference by one or more of the following measures:
-Relent or relocate the receiving antenna.
-Increase he separation between the equipment an receiver.
Connect the equipment into an outlet ona circuit different from that to which the -receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment, The device has been evaluated to meet general RF exposure requirement. This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment.
This device and its antenna(s) must not be co-located Or conjunction with any other antenna or transmitter. The wireless charging function has been blocked by software.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>