OLIGHT Baton 4 Rechargeable Side Switch EDC Flashlight User Manual

June 15, 2024
OLIGHT

OLIGHT Baton 4 Rechargeable Side Switch EDC Flashlight

OLIGHT-Baton-4-Rechargeable-Side-Switch-EDC-Flashlight-
product

Product Information

Specifications

Specification Value
Cool White CCT 5700~7000K
CRI 70
Turbo Mode 1,300 lumens
High Mode 600 lumens
Medium Mode 60 lumens
Low Mode 12 lumens
Moonlight Mode 0.5 lumens
Peak Beam Intensity 7,225cd
Beam Distance 170m
Waterproof Rating IPX8
Battery Type Rechargeable Li-ion Battery
Battery Capacity 650mAh
Battery Voltage 3.6V
Working Temperature
Dimensions (L)63(D)21mm (L)2.48(D)0.83in
Weight 52.5g/1.85oz (Including Battery)

Product Usage Instructions

Remove the Insulating Film
Before using the flashlight, remove the insulating film as shown in Figure 1.

Charging
To charge the flashlight, follow these steps:

  1. Unscrew the flashlight to access the charging port.
  2. Connect the USB Magnetic Charging Cable to the charging port.
  3. Plug the other end of the cable into a USB power source.
  4. The charging indicator will turn red to indicate charging and green when charging is completed. Refer to Figure 2.

Turning On/Off the Flashlight
To turn on/off the flashlight, simply press the button as shown in Figure 3. The flashlight will light up at the memorized brightness level. The last used mode will be memorized except for Turbo mode and Strobe mode.

Lock/Unlock Function
The flashlight has a lock/unlock function to prevent accidental activation. To lock the switch button, follow these steps:

  1. Ensure the flashlight is turned off.
  2. Press and hold the button for about 2 seconds until the Moonlight mode turns on and off.
  3. When the button is locked, pressing the button once will display the remaining battery level without turning on the flashlight.
  4. To unlock the button and activate Moonlight mode, press and hold the button for 1 second or more. Refer to Figure 4.

Moonlight Mode
To activate Moonlight mode, follow these steps:

  1. Ensure the flashlight is turned off.
  2. Press and hold the button for 1 second or more.
  3. If the last used mode was Moonlight mode, simply press the button to activate it. Refer to Figure 5.

Turbo Mode
To enter Turbo mode, quickly double-press the button as shown in Figure 6.

Strobe Mode
To enter Strobe mode, quickly press the button three times or more. Pressing the button once or holding it down will exit Strobe mode. Refer to Figure 7.

Adjusting Brightness
The flashlight allows you to adjust the brightness level. You can either double-press the button to enter Turbo mode or refer to Figure 8 for more options.

FAQ

  • Q: How do I know the battery and brightness level?
    A: The flashlight has indicators to show the battery and brightness level. Figure 10-1 shows the brightness level indicator, and Figure 10-2 shows the battery level indicator.

  • Q: How long does it take to charge the flashlight?
    A: The charging time is approximately 1 hour.

A rechargeable side-switch EDC flashlight with auto shut-off function and MCC charging.

IN THE BOX

SPECIFICATIONS

USB Magnetic charging cable

  • Cable length 0.5m
  • Input USB Type-A, DC 5V, 2A
  • Output CC & CV, 4.2V, 1A
  • Charging time About 1 hour

Remove the insulating film before use

Charging

Turn On/Off the flashlight

Press the button to turn on/off the flashlight. When turned on, the flashlight will light up at the memorized brightness level. (Moonlight, Low, Medium, and High modes will be memorized when turned off. Turbo mode will be memorized as High mode; High mode output will last for 1 minute before switching to Medium mode; Strobe mode will not be memorized.)

Lock/Unlock

To lock the switch button, when the flashlight is off, press and hold the button (for about 2 seconds) until the Moonlight mode turns on and off. When the button is locked, press the button once to display the remaining battery level without turning on the flashlight. Press and hold the button for 1 second or more to unlock the button and activate Moonlight mode.

Moonlight mode

To activate Moonlight mode, press and hold the button for 1 second or more when the flashlight is off. If the last used mode was Moonlight mode, simply press the button.

Turbo mode

Quickly double-press the button to enter Turbo mode

Strobe mode

Quickly press the button three times or more to enter Strobe mode. Press the button once or hold it down to exit Strobe mode.

Adjusting brightness

When the flashlight is on, press and hold the button. The flashlight will cycle through Low, Mid, and High modes, starting from the present brightness level. Release the button to select the desired brightness level. (Note: Moonlight mode and Turbo mode are not included in this cycle)

Auto Shut-Off function

The flashlight can be set to automatically turn off after two preset periods: a long period (9 minutes) and a short period (3 minutes). To activate the Auto Shut-Off function, double-press and hold the button when the flashlight is on. After the function is turned on, the light will flash once to indicate that the short period is set, and twice for the long period. To switch between timing periods, double-press and hold the button during a timing period. When reactivating the Auto Shut-Off function, the previous timing setting will be used.

Indicators instructions

Brightness level indicator

OLIGHT-Baton-4-Rechargeable-Side-Switch-EDC-Flashlight-fig-
\(13\)

If the brightness level indicator fluctuates, it means that the current brightness level is at least 47% or higher.

Battery level indicator

Multi-language dictionary

  • Moonlight
  • Low
  • Medium
  • High
  • Turbo
  • Strobe
  • Press
  • Double press
  • Press and hold
  • Triple press
  • Blink once
  • Blink twice

WARRANTY

  • Within 30 days of purchase: Contact the original seller for repair or replacement.
  • Within 5 years of purchase: Contact Olight for repair or replacement.
  • Battery warranty: Olight offers a one-year warranty for all rechargeable batteries.
  • USB magnetic charging cable: One year.

If you experience quality problems or damage with low-value fittings like lanyards or clips within 30 days of purchase under normal use conditions, please contact our after-sale service. For issues that occur after 30 days or for damage caused by abnormal use conditions, we provide conditional quality assurance as appropriate.

USA Customer Support

Global Customer Support

Visit www.olightworld.com to see our complete product line of portable illumination tools.

Dongguan Olight E-Commerce Technology Co., Ltd.
4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town, Dongguan City, Guangdong, China.

Made in China.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

OLIGHT User Manuals

Related Manuals