ErgoUnion Arti600-4 TV Floor Stand with 4 Legs Instructions
- June 16, 2024
- ergoUnion
Table of Contents
Arti600-4 TV Floor Stand with 4 Legs
Instructions
Arti600-4 TV Floor Stand with 4 Legs
Instrution Manual
| MODEL Arti600-4|
---|---|---
Dear Customer
Thanks for your purchase in our sore. Any questions, please contact s with below eails:
- Purchase platform & order number
- Model number & Instruction version#
- The detailed photo (faulty part, damage part if some parts are missing, please circe tthem on the manual nstruction) and send us. we will reply you as so0n as possible once received your message (usually within 24 hours)
- Thank you for choosing our products please read the instructions carefully before installation,and please keep the instructions properly
Tips and tricks
- Do not attempt to move this furniture without first removing all equipment
- Death or serious injury may occur when children ciimb on audio and/or video equipment furniture. A remote control or toys. placed on the furnishing may encourage a child to climb on the fumishing and as a result the furnishing may tip over onto the child.
- Please contact us using the details shown for further advice
WARNING If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!
What’s in the box
Easy toinstall
Note: To facilitate the installation of safety rope, ensure to
make the column holes at the back and keep the same direction while under
assembly.
Note: This is the back of the TV set.
The cable clips should be installed on the wooden legs on the back of the TV
set. Before installing the cable clips, remove the release paperon the inside
of the cable clips.
How to choose mounting screws for your TV 
(a1) For Flat
Screen TV
Choose the suitable mounting
screws and washers combination based on different types of TV.
(a2) For Curved Screen TV 
Choose the suitable
mounting screws and washers combination based on different types of TV
(a3) For Uneven TV
Choose the suitable
mounting screws and washers combination based on different types of TV.
(a4) For TV with wires in the middle
Choose
the suitable mounting screws and washers combination based on differenttypes
of TV.
Before assembling the TV, use G wrench to
adjust the height of the limitring according to the size of the TV, and use
self-provided tapeline to ensure the same height of the left and right
limitrings.
The direction of the two thread holes of the limitring should be in the rear
to ensure that the height of the TV setcan be adjusted after assembly.
After the upper bracket is setinto the column, fasten the black plastic latch
® on the lower based on differenttypes of TV
Solid Brick and Concrete Mounting
WARNING
Installers must verify that the supporting surface will safely support the
combined weight of the equipment and all attached hardware and components.
Wood Stud Wall Mounting
WARNING
- Make sure that mounting screws are anchored into the center of the studs. The use of a stud finder is highly recommended.
- Installers are responsible to provide hardware for other types of mounting situations.
- Installers must verify that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
support@ergounion.com
Last Updated: 05/06/2023
Documents / Resources
|
ErgoUnion Arti600-4 TV Floor Stand with 4
Legs
[pdf] Instructions
Arti600-4 TV Floor Stand with 4 Legs, Arti600-4, TV Floor Stand with 4 Legs,
Floor Stand with 4 Legs, Stand with 4 Legs
---|---