Lenovo ThinkVision P32pz-30 Mini LED Monitors User Guide

: June 16, 2024
: Lenovo

Lenovo ThinkVision P32pz-30 Mini LED Monitors

Lenovo-ThinkVision-P32pz-30-Mini-LED-Monitors

Specifications

Machine Types: 63E5
Product numbers: C23315UP0 63E5-GAR2-WW

Product Information
The ThinkVision P32pz-30 is a flat panel monitor designed to provide high- quality display and performance. It supports Lenovo Accessories and Display Manager, formerly known as Lenovo Display Control Center.

Shipping Contents

The product package should include the following items:

Flat Panel Monitor
Information Flyer
Stand
Base
Power Cord
USB4 Cable
USB C-A Cable
HDMI Cable
DisplayPort Cable

Note: This equipment is not suitable for use in locations where children are likely to be present to avoid any potential harm if the machine falls down.

*: The actual transfer rate using the various USB connectors on this device may vary depending on factors such as the processing capability of peripheral devices, file attributes, and system configuration. The transfer rates for USB C to A are typically 5 Gbit/s for USB 3.1 Gen 1 and 10 Gbit/s for USB 3.1 Gen 2.

Product Usage Instructions

Chapter 1. Getting started
This chapter provides detailed information on your Flat Panel Monitor. For a quick overview, please refer to the Setup Poster that was shipped with your monitor.

Chapter 2. Adjusting and using your monitor
This chapter covers the various adjustments and usage instructions for your monitor. It includes information on power management modes.

Understanding power management
This section provides an explanation of power management and its importance in conserving energy and extending the lifespan of your monitor.

Power Management Modes
This section explains the different power management modes available on your monitor and how to configure them for optimal energy efficiency.

Chapter 3. Reference information

This chapter provides additional reference information and resources for troubleshooting and further understanding of your Flat Panel Monitor.

FAQ (Frequently Asked Questions)

Q: Where can I find safety tips for using my computer?
A: You can find safety tips for using your computer at http://www.lenovo.com/safety.

Q: What is included in the product package?
A: The product package includes the following items:

Flat Panel Monitor
Information Flyer
Stand
Base
Power Cord
USB4 Cable
USB C-A Cable
HDMI Cable
DisplayPort Cable

Q: Can I use the monitor in locations where children are present?
A: It is not recommended to use the monitor in locations where children are likely to be present to avoid any potential harm if the machine falls down.

First Edition (August 2023)
© Copyright Lenovo 2023.
LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure.
LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.

Safety information

General Safety guidelines
For tips to help you use your computer safely, go to: http://www.lenovo.com/safety

Before installing this product, read the Safety Information.

Chapter 1. Getting started

This User’s Guide contains detailed information on the your Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor. P32pz-30 supports Lenovo Accessories and Display Manager-ThinkColour. Formerly Lenovo Display Control Center.

Shipping contents The product package should include the following items:

Flat Panel Monitor
Information Flyer
Stand
Base
Power Cord
USB4 Cable
USB C-A Cable
HDMI Cable
DisplayPort Cable

Note: This equipment is not suitable for use in locations where children are likely to be present, avoid hurting your child when machine falling down.
: Depending on many factors such as the processing capability of peripheral devices, file attributes, and other factors related to system configuration and operating environments, the actual transfer rate using the various USB connectors on this device will vary and is typically slower than the data rates as defined by the respective USB specifications: USB C to A: 5 Gbit/s for USB 3.1 Gen 1; 10 Gbit/s for USB 3.1 Gen 2;
USB4: 5 Gbit/s for USB 3.1 Gen 1; 10 Gbit/s for USB 3.1 Gen 2; 20 Gbit/s for USB4 Gen 22; 40 Gbit/s for USB4 Gen 3*2.

Notice for use
To set up your monitor, please see the illustrations below.
Note: Do not touch the monitor within the screen area. The screen area is glass and can be damaged by rough handling or excessive pressure. Lenovo-
ThinkVision-P32pz-30-Mini-LED-Monitors-fig-2

Take out the Top cushion and accessories.
Mounting the stand to monitor’s recess.
Insert the base towards the stand and tighten the thumbscrew.
Stand up the monitor with both hands carefully.

Note: To install a VESA mount, please see “Wall Mounting (Optional)”on page 2-14.

Product overview

This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot.

Types of adjustments

Tilt
Please see the illustration below for an example of the tilt range.

Swivel
With the built-in pedestal, you can tilt and swivel the monitor for the most comfortable viewing angle.

Height adjustment
For height adjustment, user needs to press down or lift up the monitor.

Monitor pivot

Adjust the screen position before rotating the monitor screen. (Make sure that the monitor screen ascent to its highest point, and it inclines backward at 23.5°.)
then rotate clockwise until the monitor stops at 90°.

Monitor controls
Your monitor has controls on the front and back which are used to adjust the display.

For information on how to utilize these keypad controls, please see “Adjusting your monitor image”on page 2-3.

Cable lock slot
Your monitor is equipped with a cable lock slot located on the rear of your monitor.

Lenovo-ThinkVision-P32pz-30-Mini-LED-Monitors-fig-8

Setting up your monitor

This section provides information on how to set up your monitor.

Connecting and turning on your monitor

Note: Be sure to read the Safety information on page iii before carrying out this procedure.

Power off your computer and all attached devices, and unplug the computer power cord.
Note: The type of plug & Socket shown here are for illustration only.
Connect the cables according to below icon indication.
For computer in HDMI connecting.
Note: Lenovo recommends that customers who require to use the HDMI input on their monitor purchase the “Lenovo HDMI to HDMI cable OB47070” www.lenovo.com/support/monitoraccessories.
For computer in DisplayPort connecting.
Note: Lenovo recommends that customers who require to use the DP Cable on their monitor purchase the “ Lenovo DisplayPort to DisplayPort Cable 0A36537” www.lenovo.com/support/monitoraccessories.
For computer in USB4 connecting. WARNING: The Lenovo 32 4K Monitor-P32pz-30 supports USB Type-C Power Delivery 3.1 (USB4) specification and can provide a maximum output of up to 140 W. For safety consideration, this USB Type-C port must be connected to the approved products with the inbox USB Type-C cable. For the list of the approved products, refer the products compatible with USB Type-C Power Delivery 3.1 (Extended Power Range 140W) Tech sheet at https://support.lenovo.com/solutions/ACC500306 If there are any * tag, you can consult the comments on page 1-1
For computer in USB type C-A connecting.
If there are any * tag, you can consult the comments on page 1-1.
Connect one end of the USB cable to the USB downstream terminal of the monitor, and connect the other end of the USB cable to an appropriate USB port on your device. Note: The USB downstream port does not provide power while the monitor switch is off.
If there are any * tag, you can consult the comments on page 1-1.
Connect one end of the DP cable to the DP input on the back of another monitor, and the other end to the DP output connector (for daisy chain) on the monitor.
Note: Lenovo recommends that customers who require to use the Display Port input on their monitor purchase the “ Lenovo Display Port to Display Port Cable 0A36537 ” For more information, go to one of the following: www.lenovo.com/support/monitor accessories.
Connect one end of the network cable connector to the Ethernet interface of the monitor and the other end to the router.
Connect the speaker’s audio cable and audio jack of monitor to transfer audio source from Display Port, HDMI, USB4, USB C-A.
Note: The audio output in Display Port, HDMI, USB4, USB C-A modes. Warning note: Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of the equalizer to maximum increases the earphones and headphones output voltageand therefore the sound pressure level.
Insert the power cord into the monitor, then plug the monitor power cord and the computer cord into grounded electrical outlets.
Note: A certified power supply cord has to be used with this equipment. The relevant national installation and or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G 0.75mm2 ) shall be used. Alternative a flexible cord be of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm2 ) shall be used.
Connect the cables with cable clip.
Power on the monitor and the computer.
14. When you install the monitor driver, download the driver that corresponds to your monitor model from the Lenovo website https://pcsupport.lenovo.com/solutions/p32pz_30. Refer to the “Manually installing the monitor driver”on page 3-6” section to install the driver.

Registering your option

Thank you for purchasing this Lenovo product. Please take a few moments to register your Product and provide us with information that will help Lenovo to better serve you in the future. Your feedback is valuable to us in developing product and services that are important to you, as well as in developing better ways to communicate with you. Register your option on the following Web site: http://www.lenovo.com/register
Lenovo will send you information and updates on your registered product unless you indicate on the Web site questionnaire that you do not want to receive further information.

KVM

KVM Built-In KVM Switch give user to operate two PC which connecting.

How to enable KVM
The shortcut key of KVM on right direction of five-way key.
The USB devices will be switched to another upstream port after OSD disappears. Note: KVM operation may cause USB device to be interrupted.

Chapter 2. Adjusting and using your monitor

This section will give you information on adjusting and using your monitor.

Comfort and accessibility
Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort while using your computer. For more detailed information
on any of these topics, visit the Healthy Computing Web site at: http://www.lenovo.com/healthycomputing/.

Arranging your work area
Use a work surface of appropriate height and available working area to allow you to work in comfort.
Organize your work area to match the way you use materials and equipment. Keep your work area clean and clear for the materials that you typically use and place the items that you use most frequently, such as the computer mouse or telephone, within the easiest reach.
Equipment layout and setup play a large role in your working posture. The following topics describe how to optimize equipment setup to achieve and maintain good working posture.

Positioning your monitor
Position and adjust your computer monitor for comfortable viewing by considering the following items:

Recommended viewing distance between the eye and the monitor screen is l.5x the diagonal of the screen. Solutions in meeting this required distance in cramped office situations include pulling desk away from wall or divider to make room for monitor, using flat panel or compact displays placing the monitor in the desk corner, or placing the keyboard in an adjustable drawer to create a deeper working surface.
Monitor height: Position the monitor so your head and neck are in a comfortable and neutral (vertical, or upright) position. If your monitor does not have height adjustments, you might have to place books or other sturdy objects under the base of the monitor to achieve the desired height. A general guideline is to position the monitor such that the top of the screen is at or slightly below your eye-height when you are comfortably seated. However, be sure to optimize your monitor height so the line of site between your eyes and the center the monitor suits your preferences for visual distance and comfortable viewing when your eye muscles are in a relaxed state.
Tilt: Adjust the tilt of your monitor to optimize the appearance of the screen content and to accommodate your preferred head and neck posture.
General location: Position your monitor to avoid glare or reflections on the screen from overhead lighting or nearby windows.

The following are some other tips for comfortable viewing of your monitor:

Use adequate lighting for the type of work you are performing.
Use the monitor brightness, contrast, and image adjustment controls, if equipped to optimize the image on your screen to meet your visual preferences.
Keep your monitor screen clean so you can focus on the screen’s contents.

Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to periodically look away from your monitor screen and focus on a far object to allow your eye muscles to relax. If you have questions on eye fatigue or visual discomfort, consult a vision care specialist for advice.

Quick tips for healthy work habits

The following information is a summary of some important factors to consider to help you remain comfortable and productive while you use your computer.

Good posture starts with equipment setup: The layout of your work area and the setup of your computer equipment have a large effect on your posture while using your computer. Be sure to optimize the position and orientation of your equipment by following the tips outlined in “Arranging your work area”on page 2-1 so you can maintain a comfortable and productive posture. Also, be sure to use the adjustment capabilities of your computer components and office furniture to best suit your preferences now and as your preferences change over time.
Minor changes in posture can help avoid discomfort: The longer you sit and work with your computer, the more important it is to observe your working posture. Avoid as suming any one posture for an extended period of time. Periodically make minor modifications in your posture to help deter any discomforts that might arise. Make use of any adjustments that your office furniture or equipment provide to accommodate changes in posture.
Short, periodic breaks help ensure healthy computing: Because computing is primarily a static activity, it is particularly important to take short breaks from your work. Periodically, stand up from your work area, stretch, walk for a drink of water, or otherwise take a short break from using your computer. A short break from work gives your body a welcome change in posture and helps to ensure you remain comfortable and productive while you do work.

Accessibility information
Lenovo is committed to providing greater access to information and technology to people with disabilities. With assistive technologies, users can access information in the way most appropriate to their disability. Some of these technologies are already provided in your operating system; others can be purchased through vendors or accessed at: https://lenovo.ssbbartgroup.com/lenovo/request_vpat.php

Adjusting your monitor image

This section describes the control features to adjust your monitor image.

Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.

Table 2-1. Direct access controls Lenovo-ThinkVision-P32pz-30-Mini-LED-
Monitors-fig-25

Using the On-Screen Display (OSD) controls

To adjust the settings, the user controls can be viewed through the OSD.

To use the controls:

Press to open the main OSD menu.
Use to move among the icons. Select an icon and press to access that function. If there is a sub-menu, you can move between options using or , then press to select that function. Use to make adjustments then press to save.
Press to move backwards through the sub-menus and exit from the OSD.
The ENERGY STAR option resets all user settings to default values so that the monitor can meet the requirements of Energy Star.

Energy Star is an energy saving program for consumer electronics led by the U.S. government.It was launched in 1992 by EPA and DOE to reduce energy consumption and greenhouse gas emissions. Energy Star logo is a symbol of energy conservation and environmental protection. It improves the concept of energy efficiency of consumers and manufacturers, and effectively guides the market.
The regulation of Energy Star improves energy efficiency and reduces air pollution by using more energy-efficient equipment in homes, offices and factories. One way to achieve this goal is to use management to reduce energy consumption when products are not in use.
The default settings for monitors conform to Energy Star certification. Any changes by users for more features and functionalities may increase power consumption, which will exceed the limitation of Energy Star’s standard. If the user changes the options related to energy efficiency when using, such as brightness, color mode, etc., select All Reset Factory or choose the Energy Star option, the power consumption will be restored to the energy efficiency with Energy Star standard.
For more information, please refer to (www.energystar.gov/products). All products of Energy Star will be posted online and can be accessed directly by governments, public institutions and consumers

Table 2-2. OSD functions

OSD Icon on Main Menu| Sub menu| Description| Controls and Adjustments
---|---|---|---

Monitor controls

| Brightness| Adjust bar(0-100)|

All input signals

Contrast| Adjust bar(0-100)

Dynamic contrast

| On
Off

Over drive

| Off
Normal
Extreme

Color Mode

| sRGB
DCI-P3
Display P3
BT.709
Adobe RGB
BT.2020
Neutral
Warm
Cool
Low blue light

Custom

| Red(0-100)
Green(0-100)
Blue(0-100)

Quick settings

|

Right key

| Brightness|

All input signals

Contrast
Color mode
KVM
Language
ECO mode

Up key

| Brightness
Contrast
Color mode
KVM
Language
ECO mode
OSD Icon on Main Menu| Sub menu| Description| Controls and Adjustments
---|---|---|---

Quick settings

|

Down key

| Brightness|
Contrast
Color mode
KVM
Language
ECO mode

Port settings

|

Input Signal

| Auto|

All input signals

USB-C
DisplayPort
HDMI 1
HDMI 2

*USB Charging

| On/Off|

Only for USB ports

□Upstream USB-C charging always on
USB C

(downstream) Charging

KVM Setting

| KVM| On/Off|

Only for USB C ports

USB-C Priority| On/Off

*USB-C1 Source

| USB-C
DisplayPort
HDMI 1
HDMI 2

*USB-C2 Source

| Auto
DisplayPort
HDMI 1
HDMI 2
DP Select| DP 1.2 / DP 1.4| HDMI is not supported

DP daisy chain

| Auto|

HDMI is not supported

On
Off

Video range

| Auto|

Only for HDMI ports

Full range 0-255
Limited range 16-235
OSD Icon on Main Menu| Sub menu| Description| Controls and Adjustments
---|---|---|---

Advanced settings

|

Button Repeat Rate

| Off|

All input signals

Default
Slow

Aspect Ratio

All input signals

Power Button lock| On/Off

HDR

|

Auto/HDR1000/HDR 10/HDR HLG/

HDR Photo/HDR Movie/HDR sRGB/ HDR Adobe RGB/HDR DCI-P3/Off

PIP/PBP

|

PIP/PBP

| Off
PBP
PIP Top Right
PIP Bottom Right
PIP Top Left
PIP Bottom Left
Swap| On/Off

PBP source

| Left source
USB-C
DisplayPort
HDMI 1
HDMI 2
Right source
USB-C
DisplayPort
HDMI 1
HDMI 2
OSD Icon on Main Menu| Sub menu| Description| Controls and Adjustments
---|---|---|---

Advanced settings

|

PIP/PBP

|

PIP source

| Background|

All input signals

USB-C
DisplayPort
HDMI 1
HDMI 2
Foreground
USB-C
DisplayPort
HDMI 1
HDMI 2

Audio source

| Main
Sub

ECO mode

| Normal
Super saving
Off
Drawing mode| On/Off
Markers| Flat/Scope/Off

Local dimming

| On
off

Smart Feature

| Presence detection| Off/Fast/Normal/Slow|

All input signals

Sitting reminder| On/Off
Distance warning| On/Off

Ambient light detection

| On/Off
Note: When on,brightness control is unavailable.
OSD Icon on Main Menu| Sub menu| Description| Controls and Adjustments
---|---|---|---

Menu settings

|

Information

| Model name:| P32pz-30|

All input signals

Firmware:|
Firmware Scaler LX.X

PD A1.94.XX.XX USB3 HUB1 XXXXX USB3 HUB2 XXXXX USB4 HUB XXXXX

LAN IC 1.XXX

|
Serial Number:| VN485511

Language

| English/Français/Italiano/简体中文/Español/

日本語/Deutsch/Русский/ไทย/Українська

OSD time out| Adjust bar(5-115)
OSD position| Adjust bar(0-100,0-100)
Transparency| Adjust bar(0-100)
OSD rotation| Normal
90
Factory reset| Reset
No
Input signal: USB-C Resolution:3840×2160 Refresh rate: 60Hz USB C Max. Power Pelivery: 140W
* The use of Extreme Mode (response time) may result in reduced display quality when fast moving video graphics are displayed.

Users should check Extreme Mode (response time) to verify if it is compatible with any applications they would like to use it with.

* 1. USB C1 is USB C Upstream port(USB4 port);

2. USB C2 is USB C Upstream port(USB data port);

* 1. When the USB Upstream port is disconnected to the PC, the USB downstream port can also be charged in the sleep mode.

Other USB-A

| √

√

| √

√

| √

√

| x x
2. The display can dynamically allocate the ability of USB4 ports to charge externally based on changes in its own power consumption.

3. USB4 port can provide external power supply of 140W without dynamic changes.

Smart Feature

This section describes how to use the Smart Features of this monitor.

Presence Detection
The screen will dim when it is detected that the user is away. The screen will be turned off gradually 5 seconds after the function is triggered. The power indicator will start blinking every 0.5 seconds
Fast / Normal / Slow: Refers to the response speed from when the user is away to when the screen starts dimming
Presence Detection: After “Presence Detection” is enabled, the monitor can detect whether the user is sitting in front of the monitor. The backlight will be turned off if the user is not sitting in front of the monitor.
Note:

The optimal distance between the user and the front of the monitor is 300 – 1,000 mm (about 12 – 40 inches)
The sensor might not work correctly due to bright lights.
The sensor might be triggered by the material of some chairs.
Do not touch the fingerprint, scratch, or damage of the sensor, which might affect the performance of the sensor. ESD might affect the normal operation of the sensor.

Sitting Reminder
The monitor can detect how long the user has been using itself. If the user enables this feature, a prompt icon will appear on the upper-left corner of the screen every 20 minutes when the user is using the monitor. The icon blinks at the frequency of 1 second for 20 seconds.

Distance Warning
The monitor can detect the distance between the user and itself. When the distance reaches a specific range, a prompt icon will appear on the upper-left corner of the screen. The icon blinks at the frequency of 1 second for 20 seconds. The prompt will continue if the distance remains unchanged Ambient light detection
When this feature is turned on, the display adjusts its brightness linearly based on the intensity of external ambient light, so that the brightness of the display is comfortable for users without causing eye strain.

Selecting a supported display mode

The display mode of the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes.
The image size, position and shape might be changed when the display mode changes. This is normal and the image can be re-adjusted using automatic image setup and the image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is inherently flicker-free.
The monitor adopts Flicker-Free technology, which clears the eye visible flicker , brings comfort viewing experience and preventing users suffer from eye strain and fatigue.

Note: If your system has previously been used with a CRT monitor and is currently configured to a display mode outside the range of this monitor, you may need to reattach the CRT monitor temporarily until you have re-configured the system; preferably to 3840 x 2160 at 60 Hz, which is a common display mode.
The display modes shown below have been optimized at the factory.

Table 2-3. Factory set display modes

Timing	Refresh rate(Hz)
640×480	60Hz
720×400	70Hz
800×600	60Hz
1024×768	60Hz
1280×720	60Hz
1280×800	60Hz
1280×1024	60Hz
1440×900	60Hz
1600×900	60Hz
1680×1050	60Hz
1920×1080	60Hz
1920×1200	60Hz
2560×1440	60Hz
3840×2160	60Hz

Understanding power management

Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below.
For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day.
Table 2-4. Power indicator

State| Power Indicator| Screen| Restoring Operation| Compliance
---|---|---|---|---
On| White| Normal| |
Standby/Suspend| Amber| Blank| Press a key or move the mouse

There may be a slight delay before the image reappears.

Note: Standby also occurs if there is no image output to the monitor.

| ENERGY STAR
Off| Off| Blank| Press the power button

There may be a slight delay before the image reappears.

| ENERGY STAR

Power Management Modes

VESA

Modes

| Horizontal Sync| Vertical Sync| Video| Power Indicator| Power Consumption
---|---|---|---|---|---
Normal operation| ****

Active

| ****

Active

| ****

Active

| ****

White

| 305W (maximum, HDR 1000 on) 265W (maximum, HDR off)

31.4 W (typical)

Active-off mode| Inactive| Inactive| Off| Amber| Less than 0.5 W
Switch off| –| –| –| Off| Less than 0.3 W
Energy Star| Power Consumption
---|---
PON| 32.31 W
ETEC| 101.85 kWh

Maximum power consumption with max luminance.
This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the software, components and peripherals you ordered and shall have no obligation to update such information. Accordingly, the customer should not rely upon this information in making decisions about electrical tolerances or otherwise. No warranty as to accuracy or completeness is expressed or implied.

Caring for your monitor
Be sure to turn off the power before you perform any maintenance on the monitor.

Do not:

Apply water or liquid directly to your monitor.
Use solvents or abrasives.
Use flammable cleaning materials to clean your monitor or any other electrical equipment.
Touch the screen area of your monitor with sharp or abrasive items. This type of contact may cause permanent damage to your screen.
Use any cleaner which contains an anti-static solution or similar additives. This may harm the coating of the screen area.

Do:

Lightly dampen a soft cloth with water and use this to gently wipe the covers and the screen.
Remove grease or finger marks with a damp cloth and a little mild detergent.

Detaching the monitor base and stand

Step 1: Place the monitor on a soft and flat surface.
Step 2: Remove the base and stand from the monitor.

Wall Mounting (Optional)
Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk-mounted to a wall-mounted display, do the following:

Step 1: Verify that the Power button is turned Off, then disconnect the power cord.
Step 2: Lay the LCD display face down on a towel or blanket.
Step 3: Remove the base from the monitor, refer to “Detaching the monitor base and stand”on page 2-10.
Step 4: Attach the mounting bracket from the VESA compatible wall mounting kit (100mm x100mm distance), VESA Mounting Screw M4 x 10 mm.
Step 5: Attach the LCD display to the wall, and follow the instructions in the wall-mounting kit.
NOTE: For use only with UL or CSA or GS-listed wall mount bracket with minimum weight/load bearing capacity of 30.48 kg (67.06 lb).

Chapter 3. Reference information 3

This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information, and service information.

Monitor specifications

Table 3-1. Monitor specifications for type-model 63E5-GAR2-WW

Dimensions	Depth	234.94 mm (9.25 in.)
Height	608.97 mm (23.97 in.)
Width	714.20 mm (28.12 in.)
Stand	Lift Tilt Swivel Pivot	155 mm

-5° to 23.5°

-45° to 45°

90°

VESA TMDS (Panel Link™)

Horizontal addressability| 3840 pixels (max)
Vertical addressability| 2160 lines (max)
Clock frequency| 600 MHz

Table 3-1. Monitor specifications for type-model 63E5-GAR2-WW

Video input (HDMI)| Interface Input signal

Horizontal addressability Vertical addressability

Clock frequency

| HDMI

VESA TMDS (Panel Link™) 3840 pixels (max)

2160 lines (max)

600 MHz

---|---|---
Video input (Type-C)| Interface Input signal| Type-C(USB4)

VESA TMDS (Panel Link™)

Horizontal addressability| 3840 pixels (max)
Vertical addressability| 2160 lines (max)
Clock frequency Transmission rate Power delivery| 600 MHz

USB4 GEN3 40G

Support EPR 140W& SPR 100W 28V/(3.75A-5A)&20V(2.25A-

5A)&15V/3A&9V/3A&5V/3A

Smart Power max up to 140W

The recommendation for DP Daisy Chain

SDR Mode

1st video source| Timing / Color Depth| Maximum number of total monitors in DP Daisy Chain
---|---|---
DisplayPort| 3840 x 2160 60Hz / 8bits| 4
USB-C| 4
1st video source| Timing / Color Depth| Maximum number of total monitors in Daisy Chain mode
---|---|---
DisplayPort| 3840 x 2160 60Hz / 10bits| 3
USB-C| 3

HDR Mode

1st video source| Timing / Color Depth| Maximum number of total monitors in DP Daisy Chain mode
---|---|---
DisplayPort| 3840 x 2160 60Hz / 10bits| 3
USB-C| 3

Note:

It is based on the DisplayPort 1.4/HBR3.
The capability will be different based on the USB setting in USB C.
The scenario will be different according to the OS and the capability of the GPU.
The color depth will be different according to the OS and the capability of the GPU in HDR mode.
Daisy Chain & HDR Daisy Chain performance is controlled by graphic card.
Open the HDR, some graphics cards may cause the second screen (daisy chain) fail to display.

Troubleshooting

If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem.

Table 3-2. Troubleshooting

Problem	Possible cause	Suggested action	Reference

Ÿ The power cord is loose or disconnected.

Ÿ There is no power at the outlet.

| Ÿ Be sure the power cord is connected properly.

Ÿ Be sure the outlet has power.

Ÿ Power on the monitor.

Ÿ Try using another power cord.

Ÿ Try using another electrical outlet.

| “Connecting and turning on your monitor”on page 1-6
Screen is blank and power indicator is amber.| The monitor is in Standby / Suspend mode.| Ÿ Press any key on the keyboard or move the mouse to restore operation.

Ÿ Check the Power Options settings on your computer.

| “Understanding power management”on page 2-13
Problem| Possible cause| Suggested action| Reference
---|---|---|---
The power indicator is amber, but there is no image.| The video signal cable is loose or disconnected from the system or monitor.| Be sure the video cable is connected with the system properly.| “Connecting and turning on your monitor”on page 1-6
The monitor brightness and contrast are at the lowest setting.| Adjust the brightness and contrast setting on the OSD menu.| “Adjusting your monitor image”on page 2-3
One or more of the pixels appear discolored.| This is a characteristic of the LCD technology and is not an LCD defect.| If there are more than five pixels missing, contact the Support Center.| Appendix A.”Service and Support”on page A-1
Ÿ Fuzzy lines in text or a blurry image.

Ÿ Horizontal or vertical lines through the image.

| Ÿ Image setup has not been optimized.

Ÿ Your system Display Properties setting have not been optimized.

| Adjust the resolution settings on your system to match

the native resolution for this monitor: 3840 x 2160 at 60 Hz.

| “Adjusting your monitor image”on page 2-3
Perform automatic image setup. If automatic image setup does not help, perform manual image setup.| “Selecting a supported display mode”on page 2-12
When working in the native resolution, you may find additional improvements by adjusting the Dots Per Inch (DPI) setting on your system.| See the Advanced section of your system’s display properties.

Manually installing the monitor driver

Below are steps for manually installing the monitor driver in Microsoft Windows 10, Microsoft Windows 11.
Installing the monitor driver in Windows 10
To use the Plug and Play feature in Microsoft Windows 10, do the following:

Turn off the computer and all attached devices.
Ensure that the monitor is connected correctly.
Turn on the monitor and then the system unit. Allow your computer to start the Windows 10 operating system.
From the Lenovo website https://pcsupport.lenovo.com/solutions/p32pz_30, find the corresponding monitor driver and download it to a PC to which this monitor is connected (such as a desktop).
Open the Display Properties window by clicking Start, Control Panel and Hardware and Sound icon. and then clicking the Display icon.
Click the Change the display settings tab.
Click the Advanced Settings icon.
Click the Monitor tab.
Click the Properties button.
Click the Driver tab.
Click Update Driver, then click Browse the computer to find the driver program.
Select Pick from the list of device driver program on the computer.
Click the Hard Disk button. By clicking the Browse button, browse and point to the following path: X:\Monitor Drivers\Windows 10 (where X indicates “the folder in which the downloaded driver is located” (such as a desktop)).
Select the “len P32pz-30.inf” file and click the Open button. Click the OK button.
In the new window, select LEN P32pz-30 and click Next.
After the installation is complete, delete all downloaded files and close all windows.
Restart the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles.

Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 3840 x 2160 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.

Installing the monitor driver in Windows 11
To use the Plug and Play feature in Microsoft Windows 11, do the following:

Turn off the computer, all attached devices.
Ensure that the monitor is connected correctly.
Turn on the monitor and then the system unit. Allow your computer to start the Windows 11 operating system.
From the Lenovo website https://pcsupport.lenovo.com/solutions/p32pz_30, find the corresponding monitor driver and download it to a PC to which this monitor is connected (such as a desktop).
On the Desktop, move mouse to bottom-left corner of screen, right-click choose Control Panel, then double click the icon of Hardware and Sound, and then click Display.
Click the Change the display settings tab.
Click the Advanced Settings icon.
Click the Monitor tab.
Click the Properties button.
Click the Driver tab.
Click Update Driver, then click Browse the computer to find the driver program.
Select Pick from the list of device driver program on the computer.
Click the Hard Disk button. By clicking the Browse button, browse and point to the following path: X:\Monitor Drivers\Windows 11 (where X indicates “the folder in which the downloaded driver is located” (such as a desktop)).
Select the “len P32pz-30.inf” file and click the Open button. Click the OK button.
In the new window, select LEN P32pz-30 and click Next.
After the installation is complete, delete all downloaded files and close all windows.
Restart the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles.

Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 3840 x 2160 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.

Getting further help
If you still can’t solve your problem, please contact the Lenovo Support Center. For more information on contacting the Support Center, please see Appendix A.”Service and Support”on page A-1

Service information

Customer responsibilities
The warranty does not apply to a product which has been damaged due to accident, misuse, abuse, improper installation, usage not in accordance with product specifications and instructions, natural or personal disaster, or unauthorized alterations, repairs or modifications.
The following are examples of misuse or abuse and not covered by warranty:

Images burned on to the screen of a CRT monitor. Burned image is preventable by utilizing a moving screen saver or power management.
Physical damage to covers, bezel, base and cables.
Scratches or punctures on monitor screens.

Service parts

The following parts are for use by Lenovo service, or Lenovo aurthorized dealers, to support the customer warranty. Parts are for service use only. The table below shows information for model 63E5-GAR2-WW.
Table 3-3. List of service parts

FRU (FIELD REPLACEABLE UNIT) PART NUMBER| DESCRIPTION| Machine Type/ Model (MTM)| COLOR
---|---|---|---
5D11L69248| P32pz-30 – 31.5 inch

FRU Monitor (HDMI)

cable FRU

| 63E5| Raven Black
5SE1L69247| P32pz-30 – FRU Stand

and Base

| 63E5| Raven Black

Appendix A. Service and Support

The following information describes the technical support that is available for your product, during the warranty period or throughout the life of your product. Refer to the Lenovo Limited Warranty for a full explanation of Lenovo warranty terms.

Registering your option
Register to receive product service and support updates, as well as free and discounted computer accessories and content. Go to: http://www.lenovo.com/register

Online technical support
Online technical support is available during the lifetime of a product at: http://www.lenovo.com/support
Product replacement assistance or exchange of defective components also is available during the warranty period. In addition, if your option is installed in a Lenovo computer, you might be entitled to service at your location. A Lenovo technical support representative can help you determine the best alternative.

Telephone technical support
Installation and configuration support through the Customer Support Center will be available until 90 days after the option has been withdrawn from marketing. After that time, the support is cancelled, or made available for a fee, at Lenovo’s discretion. Additional support is also available for a nominal fee.
Before contacting a Lenovo technical support representative, please have the following information available: option name and number, proof of purchase, computer manufacturer, model, serial number and manual, the exact wording of any error message, description of the problem, and the hardware and software configuration information for your system.
Your technical support representative might want to walk you through the problem while you are at your computer during the call.
Telephone numbers are subject to change without notice. The most up-to-date telephone list for Lenovo Support is always available at: http://consumersupport.lenovo.com

Country or Region	Telephone Number
Argentina	0800-666-0011

(Spanish, English)

Australia| 1-800-041-267

(English)

Austria| 0810-100-654 (For local rate) (German)
Belgium| Warranty service and support: 02-339-36-11 (Dutch, French)
Bolivia| 0800-10-0189

(Spanish)

Country or Region	Telephone Number
Brazil	Calls made from within the Sao Paulo region: 11-3889-8986 Calls made

from outside the Sao Paulo region: 0800-701-4815 (Portuguese)
Brunei Darussalam| Dial 800-1111

(English)

Canada| 1-800-565-3344

(English, French)

Chile| 800-361-213

(Spanish)

China| Technical Support Line: 400-990-8888 (Mandarin)
China

(Hong Kong S.A.R.)

| (852) 3516-8977

(Cantonese, English, Mandarin)

China

(Macau S.A.R.)

| 0800-807 / (852) 3071-3559

(Cantonese, English, Mandarin)

Colombia| 1-800-912-3021

(Spanish)

Costa Rica| 0-800-011-1029

(Spanish)

Croatia| 385-1-3033-120

(Croatian)

Cyprus| 800-92537

(Greek)

Czech Republic| 800-353-637

(Czech)

Denmark| Warranty service and support: 7010-5150 (Danish)
Dominican Republic| 1-866-434-2080

(Spanish)

Ecuador| 1-800-426911-OPCION 4

(Spanish)

Egypt| Primary: 0800-0000-850

Secondary: 0800-0000-744 (Arabic,English)

El Salvador| 800-6264

(Spanish)

Estonia| 372-66-0-800

(Estonian, Russian, English)

Finland| Warranty service and support: +358-800-1-4260 (Finnish)
France| Warranty service and support: 0810-631-213 (hardware) (French)
Germany| Warranty service and support: 0800-500-4618 (toll-free) (German)
Country or Region| Telephone Number
---|---
Greece| Lenovo Business Partner (Greek)
Guatemala| Dial 999-9190, wait for operator, and request to reach 877-404-9661 (Spanish)
Honduras| Dial 800-0123

(Spanish)

Hungary| +36-13-825-716

(English, Hungarian)

India| Primary: 1800-419-4666 (Tata)

Secondary: 1800-3000-8465 (Reliance) Email: commercialts@lenovo.com (English and Hindi)

Indonesia| 1-803-442-425

62 213-002-1090 (Standard Charges Apply) (English, Bahasa Indonesia)

Ireland| Warranty service and support: 01-881-1444 (English)
Israel| Givat Shmuel Service Center: +972-3-531-3900 (Hebrew, English)
Italy| Warranty service and support: +39-800-820094 (Italian)
Japan| 0120-000-817

(Japanese, English)

Kazakhstan| 77-273-231-427 (Standard Charges Apply) (Russian, English)
Korea| 080-513-0880 (Collect call)

02-3483-2829 (Toll Call)

(Korean)

Latvia| 371-6707-360

(Latvian, Russian, English)

Lithuania| 370 5278 6602

(Italian, Russian, English )

Luxembourg| ThinkServer and ThinkStation: 352-360-385-343 ThinkCentre and ThinkPad: 352-360-385-222 (French)
Malaysia| 1-800-88-0013

03-7724-8023 (Standard Charges Apply) (English)

Malta| 356-21-445-566

(English, Italian, Maltese Arabic)

Mexico| 001-866-434-2080

(Spanish)

Netherlands| 020-513-3939

(Dutch)

New Zealand| 0508-770-506

(English)

Country or Region	Telephone Number
Nicaragua	001-800-220-2282

(Spanish)

Norway| 8152-1550

(Norwegian)

Panama| Lenovo Customer Support Center: 001-866-434 (toll-free) (Spanish)
Peru| 0-800-50-866 OPCION 2

(Spanish)

Philippines| 1-800-8908-6454 (GLOBE subscribers)

1-800-1441-0719 (PLDT subscribers) (Tagalog, English)

Poland| Laptops and tablets branded with logo Think: 48-22-273-9777 ThinkStation and ThinkServer: 48-22-878-6999

(Polish, English )

Portugal| 808-225-115 (Standard Charges Apply) (Portuguese)
Romania| 4-021-224-4015

(Romanian)

Russia| +7-499-705-6204

+7-495-240-8558 (Standard Charges Apply) (Russian)

Singapore| 1-800-415-5529

6818-5315 (Standard Charges Apply) (English, Mandarin, Bahasa Malaysia)

Slovakia| ThinkStation and ThinkServer: 421-2-4954-5555
Slovenia| 386-1-2005-60

(Slovenian)

Spain| 34-917-147-833

(Spanish)

Sri Lanka| 9477-7357-123 (Sumathi Information systems) (English)
Sweden| Warranty service and support: 077-117-1040 (Swedish)
Switzerland| Warranty service and support: 0800-55-54-54 (German, French, Italian)
Taiwan| 0800-000-702

(Mandarin)

Thailand| 001-800-4415-734

(+662) 787-3067 (Standard Charges Apply) (Thai, English)

Turkiye| 444-04-26

(Turkish)

United Kingdom| Standard warranty support: 03705-500-900 ( local rate)

Standard warranty support: 08705-500-900 (English)

Country or Region	Telephone Number
United States	1-800-426-7378

(English)

Uruguay| 000-411-005-6649

(Spanish)

Venezuela| 0-800-100-2011

(Spanish)

Vietnam| 120-11072 (Toll Free)

84-8-4458-1042 (Standard Charges Apply) (Vietnamese, English)

Appendix B. Notices

Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.
However, it is the user ‘s responsibility to evaluate and verify the operation of any other product, program, or service.
Lenovo may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to:

Lenovo (United States), Inc.
1009 Think Place – Building One Morrisville, NC 27560
U.S.A.
Attention: Lenovo Director of Licensing

LENOVO PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.
The products described in this document are not intended for use in implantation or other
life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties. All information contained in this document was obtained in specific environments and is presented as an illustration. The result obtained in other operating environments may vary.
Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk.
Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development- level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment.

Recycling information

Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. For information on recycling Lenovo products, go to: http://www.lenovo.com/recycling

Collecting and recycling a disused Lenovo computer or monitor
If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources. Computers and monitors are categorized as industrial waste and should be properly disposed of by an industrial waste disposal contractor certified by a local government. In accordance with the Law for Promotion of Effective Utilization of Resources, Lenovo Japan provides, through its PC Collecting and Recycling Services, for the collecting, reuse, and recycling of disused computers and monitors. For details, visit the Lenovo Web site at https://www.lenovo.com/jp/ja/services_warranty/recycle/pcrecycle/. Pursuant to the Law for Promotion of Effective Utilization of Resources, the collecting and recycling of home-used computers and monitors by the manufacturer was begun on October 1, 2003. This service is provided free of charge for home-used computers sold after October 1, 2003. For details, visit the Lenovo Web site at https://www.lenovo.com/jp/ja/services_warranty/recycle/personal/.
Disposing of Lenovo computer components
Some Lenovo computer products sold in Japan may have components that contain heavy metals or other environmental sensitive substances. To properly dispose of disused components, such as a printed circuit board or drive, use the methods described above for collecting and recycling a disused computer or monitor.

Trademarks

The following terms are trademarks of Lenovo in the United States, other countries, or both:

Lenovo
The Lenovo logo
ThinkCenter ThinkPad
ThinkVision

Microsoft, Windows, and Windows NT are trademarks of the Microsoft group of companies. Other company, product, or service names may be trademarks or service marks of others.

Power cords and power adapters
Use only the power cords and power adapters supplied by the product manufacturer Do not use the ac power cord for other devices.