Neomounts FPMA-VESA200 Wall Plate Instruction Manual
- June 16, 2024
- Neomounts
Table of Contents
Neomounts FPMA-VESA200 Wall Plate
Product Information
Specifications
- Model: FPMA-VESA200
- Dimensions: 220mm x 200mm x 120mm
- VESA Compatibility: 50x50mm, 200x200mm
- Weight Capacity: 0-35kg
Product Usage Instructions
Step 1: Attaching the VESA Plate to the Bracket
EN: Attach the VESA plate to the bracket
Parts Required
- A. VESA plate (x1)
- B. M5x16 screws (x4)
- C. M5 nuts (x4)
Instructions
- Position the VESA plate on the bracket.
- Insert the M5x16 screws through the holes in the VESA plate and tighten them using the M5 nuts.
Step 2: Optional Attachments
Note : The following parts are not included and are optional attachments.
Parts Required
- M-E screws (x4)
- M-A screws (x4)
- M-F screws (x4)
- M-B screws (x4)
- M-C screws (x4)
- M-D screws (x4)
- M-G screws (x8)
Instructions
- If desired, use the M-E screws to attach additional accessories.
- Use the M-A, M-F, M-B, M-C, M-D, and M-G screws as needed for other optional attachments.
Frequently Asked Questions (FAQ)
-
Q: What is the weight capacity of the FPMA-VESA200?
A: The weight capacity of the FPMA-VESA200 is 0-35kg. -
Q: What VESA sizes are compatible with this product?
A: This product is compatible with VESA sizes 50x50mm and 200x200mm.
Dimension
FPMA-VESA200
VESA adapter plate
PARTS
-
STEP 1
Attach the VESA plate to the bracket -
STEP 2
Attach the screen to the bracket
OPTION
Use spacers if necessary
CAUTION
- To ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
- The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
- The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquakes or typhoons.
- It is recommended that the mount be installed by qualified personnel only.
- At least two persons are needed to install or remove the product to avoid hazard of falling objects.
- Please carefully inspect the area where the mount is to be installed:
- Avoid places that are subject to high temperatures, humidity or contact with water.
- Do not install the product near air conditioning vents or areas with excess dust and fumes.
- Only install on vertical walls and avoid slanted surfaces.
- Do not install in places subject to any shock or vibration.
- Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
- Maintain sufficient space around the display to ensure adequate ventilation.
- To ensure safe installation, first check the structure of the wall, ceiling or floor and select a secure mounting location.
- The wall, ceiling or floor should be strong enough to sustain a weight of at least four times of the display and mount combined. The mounting location must be able to withstand earhquake or other strong shock.
- Do not modify any accessories or use broken parts. Contact your dealer with any questions.
- Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
- Drill holes and bolts will be left in the wall, ceiling or floor once the display and bracket are removed. Stains may occur after extended use.
- Since the manufacturer has no way to control the wall, ceiling or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
- Please consult the English language manual for any dispute on conditions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>