BELLEZE 014-HG-41308-2 Carl Accent Table Ultra Fast USB Type AC Outlet Strip Installation Guide

BELLEZE 014-HG-41308-2 Carl Accent Table Ultra Fast USB Type AC Outlet

Strip

Product Information

• Specifications
  • Product Name: Carl Accent Table
  • Model Number: 014-HG-41308-2
  • Weight Limitations:
  • Maximum Load: 50 lb
  • Maximum Load: 10 lb
  • Maximum Load: 30 lb

Product Usage Instructions

• Before Assembly
  • Ensure the assembly area is clear of any obstacles and provide a clean surface such as an empty carton, carpet, or rug to prevent scratches or damage.
  • Keep pets and children away from the assembly area for safety.
  • Check that all necessary hardware and parts are included.
  • Do not use the product if any parts are missing or damaged.
  • This furniture requires 2 people for assembly.
  • Before assembly, read the instruction manual to familiarize yourself with the steps.
  • Do not destroy or discard any packaging until you have confirmed that you have all the necessary parts for assembly.
• Assembly Steps
  • Step 1: Attach cam bolts to the side panels.
  • Use 4x A bolts to attach the cam bolts to the side panels (3, 4).
  • Step 2: Detach the drawer slider from the slide bracket.
  • Detach the drawer slider (G2) from the slide bracket (G).
  • Step 3: Attach the slide brackets onto the side panels
  • Attach the slide brackets onto the side panels (3, 4).
  • Make sure to insert screws in the correct openings.
  • Step 4: Assemble the storage panel between the side panels
  • Place the storage panel (5) between the side panels (3, 4) and secure them with 4x B bolts.
  • Step 5: Slide in the lower back panel between the side panels.
  • Slide in the lower back panel (11) between the side panels (3, 4) and secure them with 4x C bolts.
  • Step 6: Assemble the bottom panel to the side panels
  • Attach the bottom panel (2) to the side panels (3, 4) using 4x D bolts.
  • Step 7: Attach stud bolts to the legs
  • Attach stud bolts to the legs (8, 9) using 8x F bolts.
  • Step 8: Attach a short base panel between the legs
  • Attach the short base panel (7) between the legs (8, 9) using 8x H bolts.
  • Attach protective pads to the legs.
  • Step 9: Assemble the long base panels between the leg assemblies
  • Assemble the long base panels (6) between the leg assemblies using 8x C bolts, 4x H bolts, and 4x Q bolts.
  • Step 10: Insert large wood dowels into the bottom panel
  • Insert 2x I wood dowels into the bottom panel (2).
  • Step 11: Assemble the base to the bottom panel
  • Attach the base to the bottom panel using 8x L bolts, 6x M bolts, and 7x N bolts.
  • Step 12: Insert wood dowels into the side panels
  • Put the table assembly in its upright position.
  • Slide in the upper back panel (10) and insert wood dowels into the side panels.
• FAQ
  • Q: How long does it take to assemble the Carl Accent Table?
  • A: The estimated time for assembly is approximately 120 minutes.
  • Q: What are the weight limitations for the Carl Accent Table?
  • A: The weight limitations are as follows:
  • Maximum Load: 50 lb
  • Maximum Load: 10 lb
  • Maximum Load: 30 lb
  • Q: Can I assemble the Carl Accent Table by myself?
  • A: No, this furniture requires 2 people for assembly.
  • Q: What should I do if I miss hardware or parts?
  • A: Do not use the product until you have restored the missing parts. Contact support@belleze.com. or call 1-800-682-6376 for assistance.
  • Q: Are there any precautions I should take during assembly?
  • A: Hand-tighten all hardware and be careful not to over-tighten to avoid damaging the product. Keep small components away from pets and children to avoid a choking hazard.

Estimated time for assembly:

• 120 mins

• Weight limitations are as follows:

• Assemble the furniture on an empty carton, carpet, or rug to prevent scratches or damage.

• For safety, please keep pets and children away from the assembly area.

• Ensure the product is fully assembled before use. If you are missing any hardware or products, do not use it until you have restored the missing parts.

• This furniture requires 2 people for assembly.

• Read this instruction manual before assembly to familiarize yourself with the various steps.

• Lay out all components and hardware separately on a flat surface and make sure that no parts are missing or damaged before assembly.

• Do not destroy or discard any packaging until you are certain that you have all the necessary parts for assembly

• Hand-tight all hardware and be careful not to over-tighten to avoid damaging the product.

CAUTION

• There are small components used in the construction of this product.
• Loose items should be kept away from pets and children to avoid a choking hazard.
• Keep all plastic bags and packaging film away from pets and children to avoid suffocation.

PACKAGE CONTENTS

INSTALLATION INSTRUCTION

Required tools for assembly (Not included)

1. Attach cam bolts to the side panels (3, 4).
2. Detach the drawer slider (G2) from the slide bracket (G).
3. Attach the slide brackets onto the side panels (3, 4).
4. Assemble the storage panel (5) between the side panels (3, 4).
5. Slide in the lower back panel (11) between the side panels (3, 4).
6. Assemble the bottom panel (2) to the side panels.
7. Attach stud bolts to the legs (8, 9).
8. Attach a short base panel (7) between the legs (8, 9). Then attach protective pads to the legs.
9. Assemble the long base panels (6) between the leg assemblies. See the installation in Step 8
10. Insert large wood dowels into the bottom panel (2).
11. Assemble the base to the bottom panel.
12. Put the table assembly on its upright position. Slide in the upper back panel (10) and insert wood dowels to the side panels.
13. Attach cam bolts to the top panel (1).
14. Assemble the top panel (1) on top of the table assembly.
15. Secure the back panels in place.
16. Attach the power strip to the top panel (1).
17. Assemble the drawer back panel (15) between the drawer side panels (13, 14).
18. Slide in the drawer bottom panel (16).
19. Attach cam bolts to the drawer front panel (12).
20. Assemble the drawer front panel (12) to the drawer tray assembly.
21. Attach sliders to the side of the drawer.
22. Slide the drawers into the table.

Warning

• Only place items on top of the product if they meet the recommended size and weight limits.
• Climbing on, stepping on, or placing overweighted objects on the product may cause property damage and/or injuries.
• Items placed onto this product must be resting on a support surface without hanging over the edges.

FURNITURE CARE AND MAINTENANCE

Medium – Density Fiberboard

• Thank you for your purchase.
• We want your item to last as long as possible.
• To ensure the product gives you years of longevity, please follow the recommendations in this care and maintenance guide.

MAINTENANCE

• Tighten all bolts and screws again within the first 2 weeks of assembly.
• Check the tightness of all bolts every 2 months and tighten them if necessary.

CLEANING

• Clean the surface of the MDF (medium-density fiberboard) with a lightly dampened cloth.
• A small amount of mild soap can be used if necessary.
• Dry the surface immediately after cleaning.
• DO NOT use bleach or alcohol to clean the surface.
• DO NOT apply wood treatment on parts made with MDF.
• MDF will swell and distort when exposed to water damage. Make sure to dry the furniture immediately after cleaning.

WARNING

The manufacturer and seller are not responsible for any liability relating to personal injury property damage or losses, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, unapproved modification or neglect of this product. © All copyright of this document belongs to BELLEZE. This document may not be printed, translated, reproduced, or distributed in whole or in part without written permission from BELLEZE.

WARRANTY

• BELLEZE products come with a 1-year warranty from the date of delivery.
• Register your product on our website to enjoy our limited lifetime warranty!

AFTER-SALE SERVICE

• Encounter any difficulties or missing parts?
• Contact us at 1-800-682-6376 or email us at support@belleze.com.
• We will send you a replacement.
• Hassle-free! No need to worry about repackaging and sending your item back.
• We hope you enjoy your new BELLEZE furniture!
• Share your photos on Instagram and tag us: @bellezefurniture
• FOLLOW US: @bellezefurniture
• CONTACT INFO:support@belleze.com. 1-800-682-6376
• ITEM NO. 014-HG-41308-2
  • The instruction booklet contains IMPORTANT safety information.
  • Please read it in full and keep it for future reference.
  • www.belleze.com.
• Scan this QR Code to view our online tutorial
• 3 v. 05122023

References

• Affordable Modern Furniture | Shop Belleze Furniture Now

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>