WeTap TAB10 10.1 Inch M10 Internet Tablet User Guide
- June 16, 2024
- WeTap
Table of Contents
WeTap TAB10 10.1 Inch M10 Internet Tablet
Instruction for use
TROUBLESHOOTING
Ql. The tablet doesn’t power on.
- Reboot your tablet after charging for 30 minutes;
- Press the power button to check if the tablet is in the Sleep Mode;
- Press and hold the power button for 5s to turn off the tablet, then reboot it;
- Press the Reset button with a pin to reboot the tablet.
Q2. The tablet doesn’t charge.
- Make sure the USB cable is properly plugged into the charring port;
- Try another compatible USB cable and adapter.
Q3. Error message occurs during the operation.
- Uninstall the App with the error message, then download and install again;
- Press the Reset button with a pin to reboot the tablet.
Q4. The tablet cannot be detected by the computer.
- Make sure the tablet is powered on;
- Try another USB cable;
- Try another USB port on the computer;
- Instead of Charge this device, choose Transfer files or Transfer photos (PTP) when connecting the tablet to the computer.
QS. The tablet cannot connect to the Wi-Fi.
- Make sure the Wi-Fi in your tablet is ON;
- Make sure you in put the correct password when connecting the Wi-Fi;
- Restart the router;
- Make sure there is no filter setting or device connection limitation in the setting of the router;
- Forget the current Wi-Fi, reset the router and connect the Wi-Fi again
Q6. The storage space of the tablet is not enough.
- Delete the Apps you don’t use;
- Clear the cache of the Apps regularly;
- Install an Micro SD card to expand the storage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>