FENIX E03R V2.0 All-Metal Keychain Flashlight User Manual
- June 12, 2024
- FENIX
Table of Contents
FENIX E03R V2.0 All-Metal Keychain Flashlight
WARNING
- Do place this light out of the reach of children!
- Do NOT shine the light directly into the eyes of anyone!
- Do NOT shine flammable objects at close range, to avoid burning objects or causing danger due to high temperature!
- Do NOT use the light in inappropriate ways such as biting in the mouth, to avoid personal injury or life threats when the light or internal battery fails!
- This light will accumulate a lot of heat while working, resulting in a high temperature of the flashlight shell. Pay attention to safe use to avoid scalding.
- Tum off and lock the light or remove the battery from the light to prevent accidental activation when the light is placed in a closed and flammable environment such as pockets and backpacks!
- The LED of this flashlight is not replaceable; so the whole light should be replaced when the LED reaches the end of its life.
FENIX E03R V2.0 FLASHLIGHT
- 500 lumens maximum output and 90 meters maximum beam distance.
- Two white light LEDs and one red light LED, with a lifespan of 50,000 hours.
- Built-in 400mAh battery.
- Switch built-in green/red breathing light.
- White/red light sources.
- USB Type-C charging port.
- Recessed switch and lockout function.
- Battery level indication and low-voltage warning.
- Intelligent overheat protection against high surface temperature.
- All-metal CNC machining light body.
- Premium type HAIii hard-anodized anti-abrasive finish.
- Size: 2.07″ x 1.02″ x 0.51″ / 52.5x 26 x 13 mm.
- Weight: 1.06 oz I 30 g.
OPERATING INSTRUCTION
On/off
- Press and hold the switch for 0.5 seconds to tum on/off the light.
- Press and hold the switch for more than 1.2s, the light will blink once on Eco, then the red light turns on.
- With the light switched off and unlocked, double-click the switch to turn on the breathing light, and press and hold for 0.5 seconds to tum off.
Output Selection
- The green light on saturated 100%- 85%
- The green light flashes: sufficient 85% – 50%
- The red light on poor 50% – 25%
- Red light flashes: critical 25% – 1 %
Switch
- Press and hold the switch for 0.5 seconds to tum on/off the light.
- In white light mode: single click the switch to cycle through Eco Low Med High.
- Press and hold the switch for 1.2 seconds to tum on the red light.
- In red light mode: single click the switch to cycle through Red Red Flash.
- With the light switched off and unlocked, double-click the switch to tum on the breathing light.
- With the breathing, light turned on, single click the switch to cycle through Red Green Red&Green in tum.
- With the light switched off, press and hold the switch for 3 seconds to lock/unlock the light.
- 5LM
- 30LM
- 150LM
- 500LM
TECHNICAL PARAMETERS
Note: According to the ANSVNEMA FL 1 standard, the above specifications
are from the results produced by Fenix through its laboratory testing using
the built-in 400mAh battery under the temperature of21~°C and humidity of 50%
– 80%. The true perform nee of this product may vary according to different
working environments and the actual battery status.
The High output Is measured In a total of runtime including output at reduced
levels due to temperature or protection mechanism In the design.
- In white light mode: single click the switch to cycle through Eco Low Med-High.
- In red light mode: single click the switch to cycle through Red Red Flash.
- With the breathing: light turned on, singly click the switch to cycle through Red Green Red&Green in turn.
Intelligent Memory Circuit
The light memorizes the last selected output in white light mode. When turned
on again the previously used output of white light mode will be recalled.
Lock/Unlock
- Lock: with the light switched off, press and hold the switch for more than 3 seconds to lock the light, the light will blink twice on Eco to indicate locked status.
- Unlock: with the light locked, press and hold the switch for 3 seconds, the light will be unlocked and activated on Eco.
- In locked status, single clicking will activate battery level indication, and other operations except long pressing will activate 2 blinks on Eco to indicate locked status.
CHARGING
- First, switch off the light and plug the USB A socket of the charging cable into an electrical outlet, then connect the USB Type-C socket of the charging cable to the light.
- The indicator will display red while charging and will turn green when fully charged.
- 0nce charging is completed, be sure to close the anti-dust cover for normal use.
- Eco and Red modes are available while charging.
BATTERY LEVEL INDICATION
- With the light switched off, single click the switch to check the battery
- level and it will last for 3 seconds.
- The green light on saturated 100% – 85%
- The green light flashes: sufficient 85% – 50%
- The red light on poor 50% – 25%
- Red light flashes: critical 25% – 1%
INTELLIGENT OVERHEAT PROTECTION
- The light will accumulate a lot of heat when used in High mode forextended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C, it will then allow the user the reselection of High mod.
LOW-VOLTAGE WARNING
When the voltage level drops below the preset level, the flashlight is programmed to downshift lo a lower brightness level until Eco mode is reached. When this happens in Eco mode, the battery level indicator blinks 3 times every 10 minutes to remind you to timely recharge thebattery.
USAGE AND MAINTENANCE
- Fully charge the light in time to ensure nom, al use next time.
- Recharge a stored light every four months to maintain the optimum performance or the battery.
- Once charging is completed, be sure to close the anti-dust cover to maintain the dustproof and waterproof ability.
INCLUDED
- Fenix E03R V2.0 flashlight, USB Type-C charging cable, Key chain, User manual, Warranty card.
FENIXLIGHT LIMITED
- Tel: +86-755-29631163/83/93
- Fax: +86-755-29631181
- E-mail: info@fenixlight.com.
- Web: www.fenixlight.com.
- Address: 2F/3F, West of Building A, Xinghong TechnologyPark, 111 Shuiku Road, Fenghuanggang Community, Xixiang Street, Baoan District, Shenzhen City, Guangdong Province, China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>