Style Selections 24146TNXLG 4-Hook 18.11-in x 2.76-in H White Decorative Wall Hook Instruction Manual
- June 8, 2024
- Style SELECTIONS
Table of Contents
Style Selections 24146TNXLG 4-Hook 18.11-in x 2.76-in H White Decorative
Wall Hook
INTRODUCTION
Thank you for purchasing this Style Selections brand product. We’ve created
these easy-to-follow instructions to ensure you spend your time enjoying the
product instead of putting it together. But, if you need more information than
what is provided here, please visit Lowes.com, search the item number and
refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
877-888-8225, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
partsplus@lowes.com or visit
www.lowespartsplus.com.
PREPARATION
Before beginning installation of product, make sure all parts are present. Compare parts with package contents list diagram above. If any part is missing or damaged, do not attempt to install the product.
Estimated Assembly Time: 10 minutes
Tools Required for Assembly (not included):
Drill with 3/32 in. and 5/16 in. drill bits, Phillips screwdriver
TOOLS REQUIRED
FEELING CONFIDENT? START YOUR NEXT PROJECT
- Visit Lowes.com for more information.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
- The maximum load for this decorative rail, regardless of mounting application, is 35 lbs.
When drilling into the wall, avoid any electrical wiring or plumbing that may be located behind the wall. Damaged electrical wiring can cause electrical shock and/or fire.
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
- Temporarily place rail (A) in desired location and mark mounting hole locations.
- a. For solid wood/wood stud installations, remove rail (A) and drill 3/32 in. pilot holes at marks.
- b. For drywall installations, remove rail (A) and drill 5/16 in. pilot holes at marks. Place anchors (BB) into holes.
- c. For all other installation types, note different hardware (not included) might be needed. Follow manufacturer’s instructions.
- Secure rail (A) to mounting surface with screws (AA). Optional: Place hole covers (CC) into the screw holes on rail (A) to cover screw.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Rail not level. | Original measurements are inaccurate. | Re-install starting |
with level marks.
CARE AND MAINTENANCE
On an annual basis, it is recommended to double-check all connections and re- tighten all screws and anchors. Clean with a lightly damp cloth or towel using water only to protect the durability of the finish on hooks and the rail.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>