SEALEY APIC1800F Full Height Industrial Cabinet Instructions

SEALEY APIC1800F Full Height Industrial Cabinet

Product Information

Specifications

• Model No: APIC1800F
• Overall Size (W x D x H): 900 x 450 x 1800mm

Introduction

The Full Height Industrial Cabinet is an industrial quality, double door, freestanding cabinet. It is designed to be easy to assemble with minimal tools required. The cabinet has a durable, scuff resistant design and features reinforced steel doors with zinc plated locking bars that provide a 3-point locking mechanism. It comes supplied with two coded keys and is ideal for home, office, garage, or workshop use.

Safety

General Safety

• Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this cabinet.
• Locate the cabinet in a suitable work area.
• Keep the work area clean, uncluttered, and ensure there isadequate lighting.
• Use the cabinet on level and solid ground, preferably concrete.
• Keep the cabinet clean and tidy in accordance with good workshop practice.
• Keep children and unauthorized persons away from the work area.
• DO NOT use the cabinet for any purpose other than that for which it is designed.
• DO NOT use the cabinet outdoors.
• DO NOT place the cabinet in a damp or wet location or an area where there is condensation.
• DO NOT clean the cabinet with any solvents which may damage the surfaces or the protective coating.
• DO NOT move the cabinet when there are items placed inside.
• DO NOT overload the cabinet.

Assembly
Assemble the cabinet following the numbered sequence below, referencing the parts list and diagram provided:

1. Unpack the contents of the box and check against the parts list/diagram. If there are any parts missing, contact your local Sealey dealer.
2. Follow the assembly steps in the numbered sequence provided in the instruction manual.
3. Use a trestle table or workbench for convenience if required.

Environment Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories, and packaging should be sorted, taken to a recycling center, and disposed of in a manner that is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

FAQ

Q: Can I use this cabinet outdoors?
A: No, this cabinet is not designed for outdoor use. It should be used in a suitable work area indoors.

Q: Can I clean the cabinet with solvents?
A: No, you should not clean the cabinet with any solvents as they may damage the surfaces or the protective coating.

Q: Can I move the cabinet when there are items placed inside?
A: No, it is not recommended to move the cabinet when there are items placed inside to prevent damage or accidents.

Q: Can I overload the cabinet?
A: No, overloading the cabinet can cause damage and compromise its structural integrity. Follow the specified weight limits.

FULL HEIGHT INDUSTRIAL CABINET
MODEL NO: APIC1800F

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Refer to instruction manual

SAFETY

GENERAL SAFETY

• WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this cabinet
• Locate cabinet in a suitable work area.
• Keep the work area clean, uncluttered and ensure there is adequate lighting.

WARNING! Use cabinet on level and solid ground, preferably concrete.

• Keep the cabinet clean and tidy in accordance with good workshop practice.
• Keep children and unauthorised persons away from the work area.
• DO NOT use the cabinet for any purpose other than that for which it is designed.
• DO NOT use the cabinet outdoors.
• DO NOT place the cabinet in a damp or wet location or an area where there is condensation.
• DO NOT clean the cabinet with any solvents which may damage the surfaces or the protective coating.
• DO NOT move the cabinet when there are items placed inside.
• DO NOT overload the cabinet.

INTRODUCTION

Industrial quality, double door, freestanding cabinet. Unit easy to assemble with minimal tools required. Durable, scuff resistant design.
Reinforced steel doors with zinc plated locking bars provide 3 point locking mechanism. Supplied with two coded keys. Ideal for home,office, garage or workshop use.

SPECIFICATION

• Model No:…………………………………………….. APIC1800F
• Overall Size (W x D x H): ……………900 x 450 x 1800mm

CONTENTS

Unpack the contents of the box and check against the parts list/diagram. If there are any parts missing, contact your local Sealey dealer.

ASSEMBLY

Assemble the cabinet following the numbered sequence below, referencing the parts list and diagram overleaf.
Use a trestle table or a workbench for convenience if required.

ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

Important: No Liability is accepted for incorrect use of this product.

Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

01284 757500
[email protected]
www.sealey.co.uk

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>