pedestal Lean Pro TV Stand Carbon Installation Guide

: June 16, 2024
: Pedestal

Table of Contents

Lean PRO
Tools
Documents / Resources

**pedestal Lean Pro TV Stand Carbon Installation Guide

**

Lean PRO

Congratulations on your new Pedestal product.

We welcome you on our journey towards creating flexible interior design solutions for tv-screens

Back in the day, televisions were design objects – beautifully made, and put on display. Bumewhere along the line, we began to care less about how they look

Most of us have a big screen at home. Personally, we love them. We watch, zap, and binge with a single click. But making them look good? Now, that’s a challenge

Mounts, pods, links, stands, call them what you want. Those things that hold your screen can really ruin your Feng shul. Setting up your screen at home can feel like choosing between a living room — or a screening room.

So, we founded Pedestal.

We’re a small team of people who design furniture that hold screens, inspired by 20th century industrial aesthetics. They should look good and work just right. That’s it.

Use the QR code or type in the URL to access our video guides. [www.pdstl.com/pages/manuals

](http://www.pdstl.com/pages/manuals)

Tools

You will need the tools listed below:

Wrench (Provided in the hardware bag)
Hex keys (Provided in the hardware bag)
Table
Soft cloth or blanket
Assisting friend

Mount brackets

Task
Mount the brackets horizontally to the leg extenders and place the adhesive rubber dots onto the head of each bolt as shown. Make sure to orient the small threaded holes inwards. Tighten all connections.

Parts
8 x M8 x 30 bolts
8 x M8 Nuts
8 x Rubber dots

Mount brackets detail

Task
Detailed view of step 1.0.

Floor protection

Task
Slide the silicone gliders onto the tube.

Parts
2 x Silicone gliders

Assemble

Task
Mount the bottom tube into the main frame using the set screws and the smallest hex key. Tighten all connections.

Parts
2x M4 x 3 mm set screws

Mount wall hook

Task
Mark the placement of the hole on the wall hook using a pencil.
The hole must be placed 147 cm from the floor. Drill a 08 mm hole and insert the included wall plug. Fasten the wall hook to the wall, using the included screw.

Parts
1 x Wall plug
1 x Wall mounting screw

Mount stand on wall hook

Task
Place the assembled stand in the wall hook, leaning against the wall

WARNING!
Incorrect assembly and installation of the stand can cause damage to the attached equipment and its surroundings. To prevent the stand from tipping over, the stand must be used with the wall attachment device provided. The included universal plugs and screws may, in rare instances, not be suitable for your wall. Use screws and plugs suitable for your walls. If you are uncertain, seek professional advice.

Mount TV brackets

Task
Place your screen facing backside up on a tabletop with a soft cloth or blanket between the two in order to protect both. Mount the TV brackets vertically using the fitting holes.
For correct fit, see step 6.1

Parts
4 x suitably sized bolts
4 x M6/M8 washers
At least 4 x suitably sized spacers

TV brackets fitting

Do not panic!
You will not need all of the remaining hardware. The large selection of remaining hardware is to accommodate as many different screens as possible.

For a correct fit you will have to identify the right combination of provided spacers, washers and bolts.

Place the spacers between the screen and the brackets to ensure that the brackets do not touch the screen.

If for instance your screen has a curved backside, you might have to use more than one layer of spacers.

Now screw the appropriately dimensioned bolts with washers through the brackets and spacers into the threaded holes on the backside of the screen. Tighten the bolts until you have a snug fit. Be sure not to overtighten. The bolts must not reach the bottom of the threaded holesertightening might cause damage to your screen.

Mount TV on stand