KANEN C11 ANC Wireless Headphone User Guide
- June 16, 2024
- KANEN
Table of Contents
User Guide
MZX772
AL ComfortQ2.0 ANC
QUICK START GUIDE
C11 ANC Wireless Headphone
Do Not Return Card
IMPORTANT
PLEASE DO NOT RETURN TO STORE
If You’re Having Trouble, We’re Here to Help!
Call us
24/7 at 1-855-292-4087
E-mail us at alsupport@sakar.com or visit s at
alteclansing.com
WELCOME
Thank you for purchasing an Altec Lansing product. Download our App to unlock
all the features our products have to offer!
http://qr.w69b.com/g/tztAzkR1u
JUST LISTEN.
In the
Box
A Closer
Look
Charging
Comnect the USB-C cable into the charging port to charge the
headphone.
Comect to computer or USB 5V 14 (orless) output device.
Powering
On Bluetooth Pairing
Powering
On and automaticaly enter pairing mode
*To enter pairing mode again, power off and then hold PowerButton for 5 seconds
REGISTER YOUR PRODUCT
To receive news, exclusive deals, OTA or firmware updates, warranty information and more please register your product at alteclansingsupport.com
follow
us
@alteclansingoficial| 
follow us
@alteclansing| 
follow us
@alteclansingofficial
---|---|---
12 Month Limited Warranty
All Altec Lansing products come with 12 month limited warranty from the date
of its original purchase
24 Hour Customer Support
We love our customers, and we care about your experience with Altec Lansing.
If you need assist please call us at 1.855.292.4087 or e-mail
alsupport@sakar.com
www.alteclansing.com
Altec Lansing Edison,NJ 08817
Control
Functions
| Press once to increase volume
Press and hold to skip forward
---|---
| Press once to play, pause, or answer, end a phone call
Press twice to activate Siri or other voice control software
Press and hold = to reject incoming calls
Press and hold to power ON or OFF
| Press once to decrease volume
Press and hold to skip back
Multi-
Point Connection
- Once FIRST device is connected, turn o JBluetooth in device settings.Headphone will auto enter Bluetooth Pairing.
- Enter your SECOND device Bluetooth settings and connect to headphone
- Enter your FIRST device settings.Turn on Bluetooth and reconnect to headphone
Manual Reset
- When Power is off press and hold the power button for sseconds until the ligkt fashes blue and red
- Keep holding +/- buttons simultaneously for 103cconds until you see the red lght flashing Stimes and turn solid red for 2seconds Headphone power OFF automaticaly
Notes
To use voice assistant, you must have a phone that is equipped with a voice assistant.
You must be within Bluetooth range to use voice assistant via your Wireless Headphone.
Your Wireless Headphone voice assistant feature will not work if a voice
assistant is not first enabled within the settings on the phone. For more
information, see your phone’s user manual.
For additional user materials and warranty information, please visit
alteclansing.com
FCCID: 2AD5N-C11
warning
To assue continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for complancs could void the wser’ suthority to opemte th
squpment.
FCC Statement
Th equpment complies with Past 5 of the FCC Rules, Operation s subject to the
following two conditions
- This devics may not cause hammfulinterference, and
- This deviee must aceapt any mterfemnes received, mcluding iterference that may cause undesined operation.
NOTE: This equipment has been tested and found to comply with the limis for a Clss B digital dvice, pursuant to part 1 of the FCC rules. These imits am designed to provide reasonable protection agaimst ham il interference in residential instalation. This equipment generates, uses and can radiate radio frequency enerey and, not installed snd used in aceordanes with the mstruetions, may cause harmfsl interference to mdis communiations However, there is 50 guarantas that mterference will ot oceur in s particolas nstalltion. f this equipment does cause ham il interference to radio ox felevision reception, which can be determined by turnin the equipment oDland on, the user is encouraged {o try o comect the mterfermnce by one o more of the following measures:
- Reorint o7 relocate the receiving sntenna,
- Increae the separation betwaen the squpment snd reeiver
- Connect the equipment nto an outleton 3 circuit &ilbrent from that o which the receiver i connected.
- Consult the dealer o an experienced radi TV technician for help
FCC Radistion Esposure Statement
The devie has been evahiated to mest generalRF exposure rmquimment The devis
can be used in the portable axposurs cond tion without 1stri tion,
FOLLOW US ON #myalteclansing
Documents / Resources
|
KANEN C11 ANC Wireless
Headphone
[pdf] User Guide
C11 ANC Wireless Headphone, C11 ANC, Wireless Headphone, Headphone
---|---