EBECO Foil Kit 500 Underfloor Heating Kit User Manual

June 16, 2024
EBECO

EBECO Foil Kit 500 Underfloor Heating Kit

Product Information

Specifications

  • Connection voltage: Max connection area at 10 A, max. Output
  • Installation temperature, min.
  • Insulation material outer
  • Max Ambient temperature
  • Thermostat

Documents

Foil Kit 500 – Underfloor Heating Kit
A complete kit for underfloor heating for tile, natural stone, and linoleum floors. The foil may only be placed in dry areas. The kit contains the EB- Therm 500 thermostat with several different energy-saving programs, tape, connection terminals, RTK cables, and sensor hose.

Features

  • Underfloor heating for wooden floors, laminate floors, and linoleum
  • Underfloor heating only for dry areas
  • Placed on concrete, plaster, or chipboard
  • WiFi READY: The thermostat can be connected to WiFi
  • Extremely low installation height

Warranty
12-year product guarantee in case of material defects. The thermostat in the kit has a 5-year product guarantee. The guarantee period for the underfloor heating is extended to 25 years if the installation is carried out by an authorized electrician and documented in Ebeco’s Garantera service.

Package Contents

  • EB-Therm 500
  • Sensor hose
  • Foil 230 V

Article List

Article Number Width (m) Length (m) Output (W/m)
8961020 0.43 13.5 28
8961021 0.43 18 28
8961022 0.43 22.5 28
8961023 0.43 27 28
8961024 0.43 31.5 28
8961026 1 10 63
8961027 1 15 63
65 6 10 65
65 8 12 65
65 10 14 65
65 10 15 65

Supplementary Kit

Article Number Width (m) Length (m) Output (W/m)
8961025 0.43 22.5 28
8961028 1 10 63

Additional Products

Usage Instructions
To use the Foil Kit 500 underfloor heating:

Step 1: Preparation
Ensure the area where the foil will be placed is dry and clean. The foil should only be placed on concrete, plaster, or chipboard surfaces.

Step 2: Installation

  1. Unroll the foil and position it on the prepared surface.
  2. Secure the foil using the included tape and connection terminals.
  3. Connect the RTK cables and sensor hose to the foil.

Step 3: Thermostat Setup

  1. Install the EB-Therm 500 thermostat according to the provided manual.
  2. Connect the thermostat to WiFi if desired.
  3. Follow the instructions in the manual to set up the desired energy-saving programs.

FAQ

  • Q: What types of floors can the Foil Kit 500 be used with?
    A: The Foil Kit 500 can be used with wooden floors, laminate floors, linoleum, tile, natural stone, and linoleum floors.

  • Q: Is the foil suitable for wet areas?
    A: No, the foil should only be placed in dry areas.

  • Q: What is the warranty period for the product?
    A: The product has a 12-year guarantee for material defects. The thermostat in the kit has a 5-year guarantee. If the installation is carried out by an authorized electrician and documented in Ebeco’s Garantera service, the warranty period for the underfloor heating is extended to 25 years.

Foil Kit 500

Underfloor heating kit with heating foil and thermostat

Usage

  • Underfloor heating for wooden floors, laminate floors and linoleum
  • Underfloor heating only for dry areas
  • Placed on concrete, plaster or chipboard
  • Everything required for installation is included
  • WiFi READY: The thermostat can be connected to WiFi
  • Extremely low installation height

Complete kit for underfloor heating for tile, natural stone and linoleum floors. The foil may only be placed in dry areas. The kit contains the EB- Therm 500 thermostat with several different energy saving programs, tape, connection terminals, RTK cables and sensor hose.

Specifications

  • Connection voltage 230 V
  • Max connection area at 10 A, max. 35 m²
  • Output 65 W/m²
  • Installation temperature, min. 5 ºC
  • Insulation material outer PET
  • Max Ambient temperature 80 °C
  • Thermostat EB-Therm 500

Documents

Warranty

12 year product guarantee in case of material defects. The thermostat in the kit has a 5-year product guarantee. The guarantee period for the underfloor heating is extended to 25 years if the installation is carried out by an authorised electrician and documented in Ebeco’s Garantera service.

Our warranty terms

The package includes the following:

Article list

Article number Width (m) Length (m) Output (W/m) Output (W/m²) Area (m²)
8961020 0.43 13.5 28 65 6
8961021 0.43 18 28 65 8
8961022 0.43 22.5 28 65 10
8961023 0.43 27 28 65 12
8961024 0.43 31.5 28 65 14
8961026 1 10 63 65 10
8961027 1 15 63 65 15

Supplementary kit

Article number Width (m) Length (m) Output (W/m) Output (W/m²) Area (m²)
8961025 0.43 22.5 28 65 10
8961028 1 10 63 65 10

Feel free to complete

Learn more about this product:https://www.ebeco.com/products/underfloor- heating/foil-kit-500

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals